• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.291-298
• /
• 1999

TCMS(Train Control ＆ Management System) is the management system of train information which intensively control, monitor and test the main on-board equipments including propulsion/brake unit by the serial transmission line. TCMS reduces interface circuits and number of train lines by the software logic and utilizing serial communication method. This paper describes the method of powering and braking control by TCMS software logic, in comparison with the powering/braking control by conventional relay logic/hardwire circuits, and the software logic was verified by simulation test with TCMS simulator.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2193-2195
• /
• 2001

This paper proposes test strategy detecting the faulted digital device or the faulted digital circuit on the digital circuit board using signature analysis technique based on the polynoimal division theory. SSA(serial Signature Analysis) identifies the faults by comparing the reminder from good device and reminder from the tested device, which reminder is obtained by enforcing the data stream outputed from output pins of tested device on LFSR(Linear Feedback Shift Resister) representing the characteristic equation.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.5-10
• /
• 2011

Recently, small hydropower attracts attention because of its renewable, clean and abundant energy resources to develop. Therefore, a tubular type hydro turbine is proposed for small hydropower in this study because the turbine has relatively simple structure and high possibility of applying to small hydropower. The purpose of this study is to investigate the performance characteristics of the turbine by field test. Field test iss conducted using one tubular turbine system as well as serial arrangement system by two tubular turbines taking into consideration of actual operation conditions. The results show that efficiency of test turbine changes considerably by the runner vane angle. Best efficiency of one turbine arrangement is higher than that of two turbine serial arrangement.

• The korean journal of orthodontics
• /
• v.48 no.4
• /
• pp.262-267
• /
• 2018

The aim of this study was to test the clinical application of an intraoral scanner for serial evaluation of orthodontic tooth movement. The maxillary dentitions of eight patients with fixed orthodontic appliances were scanned using an intraoral scanner at the beginning of treatment (T0), and at 1 month (T1), 2 months (T2), 3 months (T3), and 4 months (T4) after T0. The serial digital models were superimposed on the palatal surface as a reference area, and the linear and angular changes of the central incisors, canines, and first molars were evaluated. The intraclass correlation coefficient and method errors showed that this method was clinically acceptable. Various types of orthodontic tooth movements, including minute movements, could be observed every month. The intraoral scanner and digital superimposition technique enabled the serial evaluation of orthodontic tooth movement without taking serial impressions and/or acquiring radiographs.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.9
• /
• pp.538-544
• /
• 2004

This paper presents the interruption capability of serial-hybrid type GCB (gas circuit breaker) compared with that of puffer type. First a puffer type model interrupter which has the stroke length of 80 mm has been designed and manufactured. And also, a serial-hybrid type interrupter which has the same design parameters as the puffer type interrupter except the serially arranged thermal-expansion chamber and puffer cylinder has been fabricated. Using a simplified synthetic test facility, the critical interruption capabilities of the two GCBs have been estimated. The critical di/dt, the critical dV/dt of ITRV (initial transient recovery voltage) and the minimum arcing time of the puffer type model GCB were 10.7 A/${\mu}\textrm{s}$, 5.5 kV/${\mu}\textrm{s}$, and 15.0 ms respectively. In the case of serial-hybrid type model GCB, each of the values was 16.6A/${\mu}\textrm{s}$, 11.5 kV/${\mu}\textrm{s}$ and 13.0 ms. As a conclusion of this work, it has been quantitatively confirmed that the hybrid type interrupter can obtain the sufficient interruption capability at the operating force which is so low that puffer type interrupter has not the interruption capability.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.9
• /
• pp.45-54
• /
• 2002

This paper proposes serial test data compression, a novel DFT scheme for embedded cores in SOC. To reduce test data amounts, share bit compression and fault undetectable fault pattern compression techniques was used. A Circuits using serial test data compression method are derived from a scan DFT method including a test-per-clock technique. For an experiment of the proposed compression method, full scan versions of ISCASS85 and ISCASS89 were used. ATALANTA has been used for ATPG and fault simulation. The amount of test data has been reduced by maximum 98% comparing with original data.

• The Journal of Korean Physical Therapy
• /
• v.21 no.1
• /
• pp.65-71
• /
• 2009

Purpose: Numerous investigators demonstrated that adaptative changes were induced by motor skill acquisition in the central nervous system. We investigated the changes of neuroelectric potential following motor learning with serial reaction time task in young healthy subjects, using electroencephalography (EEG). Methods: Twelve right-handed normal volunteers were recruited, who have no history of neurological dysfunction and were given to written the informed consent. All subjects were assigned to flex to extend the wrist joint or flex the thumb for pressing the matched button as quickly and accurately as possible, when one of five colored lights was displayed on computer screen (red, yellow, green, blue, white). EEG was measured, whenfive types simulations ware presented randomly with equal probabilities of 20% in total 200 times at the pre and post test. And they were scheduled for 30 minutes practice session during two consecutive days in the laboratory. Results: The results showed that the reaction time at the post test was significantly reduced, compared to one of the pre test in serial reaction time task. In EEG map analysis, the broaden bilateral activation tended to be changed to the focused contralateral activation in the frontoparietal area. Conclusion: These findings showed that acquisition of motor skill led to product more fast motor execution, and that motor learning could change cortical activation pattern, from the broaden bilateral activation to the focused contralateral activation. Thus we concluded that the adaptative change was induced by motor learning in healthy subjects.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.427-436
• /
• 2018

HADAX is a serial communication converter of train control computer. It is connected with various signal equipments such as wayside signal equipments, station signal equipments, train control computers, and transmits control information and signal condition information for train control. And transmits information to several electronic interlocking devices through a splitter interface. Since HADAX interfaces with many signaling devices through serial communication, frequent communication connection faults necessitate improvement of performance such as dual system configuration, integration of external splitter, and multi-channelization of communication card. The improved HADAX device should have compatibility with the dimensions of existing enclosure and enclosure, and verify the performance of dual system and splitter integration. Therefore, we verified the performance of HADAX through the route control test, dual system test, and multi-channel communication test with splitter integrated connection by connecting with the existing signal equipment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.7
• /
• pp.362-368
• /
• 2006

This paper presents the results of a small capacitive current interruption test for the three types of interrupter which are called 'serial type', 'parallel/separated type' and 'puffer type' according to the arrangement of the thermal expansion chamber and the puffer cylinder. After the preconditioning test the small current interruption capability of the 'puffer type' decreased, on the contrary, that of the hybrid interrupters increased. A number of reignition have been occurred in the 'serial type' hybrid interrupter and the change of small current interruption capability after preconditioning test is mainly influenced by the structure of interrupter. Finally it has been proved that the 'parallel/separated type' hybrid interrupter has the best interruption performance through the verification tests.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.41-49
• /
• 2004

In this paper, a design and measurement method for FPGA embedded gigabit-transceiver is presented. Altera's Stratix GX device which is general purpose transceiver called GXB was used for implementing PCI Express transceiver. PCI Express is the generation high performance serial I/O bus used to interconnect peripheral devices. After GXB was set follow by PCI Express specifications, the design has been verified by timing simulation and implemented as hardware. We tested it as follow. First GXB internal digital and analog block test second GXB transmitter signal integrity test called Eye mask test, third GXB high-speed serial I/O buffer and on-chip termination test and the last GXB protocol test. This paper shows all the design and measurement procedure about FPGA embedded gigabit-transceiver.