• Journal of architectural history
• /
• v.12 no.4 s.36
• /
• pp.7-26
• /
• 2003

This article works on the development process of the Buddhist Temple with two pagodas in the Eastern Asia. in 7-8th centuries. This study was motivated from the observation that why there are many the Buddhist Temple having two pagodas only around the late 7th century, roughly around 670 A.D.. This period corresponds to the Silla Dynasty(in Korean History) and Hakuho Period(in Japan History) among the Eastern Asia while the composition of the temple being changed as Buddhism spreads out from China. The results of this study are the followings. The appearance of the Buddhist Temple having two pagodas was resulted from the representation of the Ideology in Botabpum(dogma of pagoda security) of the Saddharmapundarika Sutra, that is to say, two Buddhas sit side by side and iconography of Esoteric Buddhism dogma supports the spirit for defending one's country. Buddhist Temple having two pagodas in China had separate tab-won(areas with pagodas outer temple building block). Buddhist Temple having two pagodas in Korea had begun with sacheunwangsa temple in Unified-Silla. But it had two pagodas with inner temple area instead of outer. This was different from the composition of China. It can be related to the layout of the temple haying two pagodas in East-Jin(in China History) and the sculpture of two pagodas in Ungang-stonecave(in China). Thus the layout of the Buddhist Temple having two pagodas in Silla had been originated from that of China, but was developed to the main temple layout on her own accord. As Japanese Temple having two pagodas had been influenced diplomatically, it had two pagodas inner area as like the layout in Shilla. But later under the influence of Tang it was modified to the layout having them in separate area. And this influence can be seen for example Tangchojaesa temple. For the more, We call see that the diplomatic trends according to the policies in East asia affected to Buddhism and then naturally also to the layout of the Buddhist Temple.

• Membrane Journal
• /
• v.32 no.5
• /
• pp.283-291
• /
• 2022

Hydrogen energy has received much attention as a solution to the supply of renewable energy and to respond to climate change. Hydrogen is the most suitable candidate of storing unused electric power in a large-capacity long cycle. Among the technologies for producing hydrogen, water electrolysis is known as an eco-friendly hydrogen production technology that produces hydrogen without carbon dioxide generation by water splitting reaction. Membranes in water electrolysis system physically separate the anode and the cathode, but also prevent mixing of generated hydrogen and oxygen gases and facilitate ion transfer to complete circuit. In particular, the key to next-generation anion exchange membrane that can compensate for the shortcomings of conventional water electrolysis technologies is to develop high performance anion exchange membrane. Many studies are conducted to have high ion conductivity and excellent durability in an alkaline environment simultaneously, and various materials are being searched. In this review, we will discuss the research trends and points to move forward by looking at the research on anion exchange membranes based on commercial polystyrene-b-poly(ethylene-co-butylene)-b-polystyrene (SEBS) block copolymers.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• Restorative Dentistry and Endodontics
• /
• v.44 no.4
• /
• pp.45.1-45.10
• /
• 2019

Objectives: Self-adhesive resin cements contain functional monomers that enable them to adhere to the tooth structure without a separate adhesive or etchant. One of the most stable functional monomers used for chemical bonding to calcium in hydroxyapatite is 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP). The aim of this study was to evaluate the influence of the10-MDP concentration on the bond strength and physical properties of self-adhesive resin cements. Materials and Methods: We used experimental resin cements containing 3 different concentrations of 10-MDP: 3.3 wt% (RC1), 6.6 wt% (RC2), or 9.9 wt% (RC3). The micro-tensile bond strength of each resin cement to dentin and a hybrid resin block (Estenia C&B, Kuraray Noritake Dental) was measured, and the fractured surface morphology was analyzed. Further, the flexural strength of the resin cements was measured using the three-point bending test. The water sorption and solubility of the cements following 30 days of immersion in water were measured. Results: The bond strength of RC2 was significantly higher than that of RC1. There was no significant difference between the bond strength of RC2 and that of RC3. The water sorption of RC3 was higher than that of any other cement. There were no significant differences in the three-point bending strength or water solubility among all three types of cements. Conclusions: Within the limitations of this study, it is suggested that 6.6 wt% 10-MDP showed superior properties than 3.3 wt% or 9.9 wt% 10-MDP in self-adhesive resin cement.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.27-33
• /
• 2011

Recently many display devices support the digital display interface as display market growth. DisplayPort is a next generation display interface at the PC, projector and high definition content applications in more widely used connection solution development. This paper implements multiple streams based on the behavior of the main link that is suitable for the display port v1.1a standard. The limit point of Displayport, interface between the Sink Device and Sink Device is also implemented. And two or more differential image data are enable to output the result through four Lanes stated in display port v1.1a, of two or more display devices without the addition of a separate Lane. The Multiple Video Streaming Controller is implemented with 6,222 ALUTs and 6,686 register, 999,424 of block memory bits synthesized using Quartus II at Altera Audio/Video Development board (Stratix II GX FPGA Chip).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.6
• /
• pp.11-17
• /
• 2001

Design and implementation of the MAC protocol processor prototype for high speed wireless LAN, which has interface with 5GHz OFDM PHY layer, is presented. We analyze the IEEE 802.11 MAC protocol specification and then separate the MAC protocol functions to be implemented by hardware and firmware and define the interface in which frames can be exchanged. That is, it is considered that high speed queue processing and interfaces with RISC processor and OFDM PHY layer. Protocol control and transmission/reception functions of the MAC functions are implemented in hardware in order to guarantee high speed processing in MAC layer. The developed MAC hardware block operates at 10MHz main clock. Therefore, transmission rate in PHY layer is about 80Mbps because data transmission/reception between MAC layer and PHY layer is performed as unit of octet. The designed FPGA MAC function chip has been implemented in wireless LAN test board and it is verified that DCF function is operated correctly.

• Journal of KIISE:Software and Applications
• /
• v.31 no.9
• /
• pp.1121-1130
• /
• 2004

This paper proposes a method for line and word segmentation for machine-printed text blocks. To separate a text region into the unit of lines, it analyses the horizontal projection profile and performs a recursive projection profile cut method. In the word segmentation, between-word gaps are identified by a hierarchical clustering method after finding gaps in the text line by using a connected component analysis. In addition, a special symbol detection technique is applied to find two types of special symbols tying between words using their morphologic features. An experiment with 84 text regions from English and Korean documents shows that the proposed method achieves 99.92% accuracy of word segmentation, while a commercial OCR software named Armi 6.0 Pro$^{TM}$ has 97.58% accuracy.y.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.12
• /
• pp.1135-1140
• /
• 2008

Bismuth-telluride based thin film materials are grown by Metal Organic Chemical Vapor Deposition(MOCVD). A planar type thermoelectric device has been fabricated using p-type $Bi_{0.4}Sb_{1.6}Te_3$ and n-type $Bi_2Te_3$ thin films. Firstly, the p-type thermoelectric element was patterned after growth of $4{\mu}m$ thickness of $Bi_{0.4}Sb_{1.6}Te_3$ layer. Again n-type $Bi_2Te_3$ film was grown onto the patterned p-type thermoelectric film and n-type strips are formed by using selective chemical etchant for $Bi_2Te_3$. The top electrical connector was formed by thermally deposited metal film. The generator consists of 20 pairs of p- and n-type legs. We demonstrate complex structures of different conduction types of thermoelectric element on same substrate by two separate runs of MOCVD with etch-stop layer and selective etchant for n-type thermoelectric material. Device performance was evaluated on a number of thermoelectric devices. To demonstrate power generation, one side of the sample was heated by heating block and the voltage output measured. As expected for a thermoelectric generator, the voltage decreases linearly, while the power output rises to a maximum. The highest estimated power of $1.3{\mu}W$ is obtained for the temperature difference of 45 K. we provide a promising procedure for fabricating thin film thermoelectric generators by using MOCVD grown thermoelectric materials which may have nanostructure with high thermoelectric properties.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.12
• /
• pp.1095-1100
• /
• 2007

Visibility of the satellite navigation is related to a environmental condition of a receiver. Obstacles like buildings and trees in urban areas can block signals and have effects on accuracy and reliability of positioning. This paper presents a method of creating 3D analysis model of urban canyon of Seoul using three-Dimensional digital map. Analysis techniques of visible satellites with Ray-Polygon Collision Detection and validation of algorithm through field tests are discussed. We have compared and analyzed the visibility of GPS and Galileo with respect to separate and simultaneous tracking in view of DOP (Dilution of Precision) using the 3D GIS digital map.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.317-326
• /
• 2004

This paper presents a new method for the detection of multiple pedestrians and tracking of a specific pedestrian using color information from a moving camera. We first extract motion vector on the input image using BMA. Next, a difference image is calculated on the basis of the motion vector. The difference image is converted to a binary image. The binary image has an unnecessary noise. So, it is removed by means of the proposed noise deletion method. Then, we detect pedestrians through the projection algorithm. But, if pedestrians are very adjacent to each other, we separate them using RGB color information. And we track a specific pedestrian using RGB color information in center region of it. The experimental results on our test sequences demonstrated the high efficiency of our approach as it had shown detection success ratio of 97％ and detection failure ratio of 3％ and excellent tracking.