• Design & Manufacturing
• /
• 제11권2호
• /
• pp.25-28
• /
• 2017

Semiconductor equipment manufacturers desire to enhance efficiency of Sub Fab to increase semiconductor productivity. For this reason, Sub Fab equipment manufacturers are developing Integrated System that combined modules with multiple facilities. Integrated System is required to apply Mount Leveler of Wedge Type in compliance with weight increase compared with existing single equipment and product shape change. This thesis analyzes main design variables of components of Wedge Mount Leveler and carries out structure analysis using ANSYS, finite element analysis program Analysis shows that main design variables of components of Wedge Mount Leveler has self-locking condition by friction force of Wedge and adjusting bolt. Each friction force hinges upon Wedge angle and Friction Coefficient of contact surface and upon the thread angle and Friction Coefficient of contact surface. Also, as a result of carrying out structure analysis of Wedge Mount Leveler, deflection and stress appears in different depending on the height of the level.

• 기술혁신학회지
• /
• 제7권1호
• /
• pp.64-88
• /
• 2004

This paper aims at investigating which factors play important roles in selecting government's new core IT industries and how competitive they are. We surveyed 6 competitiveness factors and 17 IT industries for the expert group. The logit and probit models were estimated and SWOT analysis was performed. The empirical results show that government put emphasis on marketability, externality and technology, not publicity, when selecting IT new core industry. The skilled human resources turn out to be a threat factor in the government selected IT new core industries such as home-network, third generation semi-conductor. Therefore, training or education system for skilled labors is required to develop and nurture such industries. The contribution to small medium venture industry and publicity are lower in the several industries such as intelligent service robots, post PC, embodied S/W, next generation battery, which are selected by government, not by standardized data based criterion. in such industries, marketabilities, technology, skilled human resources are threats factors to such industries. Therefore every effort for enhancing the marketability and R&D investment and education system for skilled labor are necessary to develop the industries.

• 한국항행학회논문지
• /
• 제17권6호
• /
• pp.700-704
• /
• 2013

양자 셀룰라 오토마타(QCA)는 CMOS의 기술을 상속받을 차세대 나노 전자 소자 중 하나이다. QCA는 원자규모 및 초저전력화로 이목이 집중되고 있으며 다양한 QCA 회로들이 제안되었다. 십진 출력을 요하는 전자회로와 마이크로프로세서에서 주로 사용되는 이진화 십진법(BCD)은 연산을 위한 변환은 편하지만 데이터 낭비가 심하다. 본 논문에서는 QCA 회로에서 감산 및 반올림에 효과적으로 이용될 수 있는 BCD-3초과 코드를 제안한다. 제안된 구조는 잡음을 최소화하고 공간 및 시간 복잡도를 고려하여 효율적으로 설계되었으며 시뮬레이션을 통해 검증하였다.

• 유공압시스템학회논문집
• /
• 제3권4호
• /
• pp.14-20
• /
• 2006

Recently, the on-off solenoid valves have been focused on core technology in the fields of the production line of semi-conductor chips and the micro fluid chips for bio-medical applications. A key characteristics for on-off solenoid valve, operated by compressed air, are high speed response and great repeatability. Indeed, it is also important to keep the pressure on the cross-sectional area of the poppet to be constant regardless of the fluctuation of the pressure exerted on the ports. In this study, we have designed and analysed the high-speed and high flow rate on-off solenoid valve using the analogy of equivalent magnetic circuit and Finite Element Method (FEM) respectively. In case of poppet, flow field characteristics was analyzed by the variation of poppet and it was able to display flow field by changing the location of the poppet. Also, we verified possibility of the design through the static and dynamic pressure and the 3D simulation using distribution curve of the force by working the front poppet.

• 한국기계가공학회지
• /
• 제18권7호
• /
• pp.8-13
• /
• 2019

As increasing demand for precise machining in advanced disciplines, especially in semi-conductor, aeronautical and automotive industries, the magnetic abrasive deburring(MAD) which is able to eliminate micro-sized burr on complex surface in less time has drawn the attention in the last decades. However, the performance of MAD is subject to shape and size of a tool. Therefore, this study aim to identify deburring behavior of MAD in U-type flow channel by measuring the length rate of burr removal in radial distance of the cylindrical tool under four process factors. In order to evaluate the deburring effect of MAD on the surface, finishing regions are divided based on center of the circular cutting tool. As a results, it was defined that the amount of burr removal in a downward direction moving toward flow channel from the top surface was higher than upward direction. This is because the magnetic abrasives were detached from magnetic lines of force due to geometrical shape.

• Nuclear Engineering and Technology
• /
• 제51권1호
• /
• pp.293-302
• /
• 2019

Many researches have been done to develop and improve the performance of personal (individual) dosimeter response to cover a wide of neutron energy range (from thermal to fast). Depending on the individual category of the dosimeter, the semiconductor sensor has been used to simplify and lightweight. In this plan, it's very important to have a fairly accurate counting of doses rate in different energies. With a general design and single-sensor simulations, all optimal thicknesses have been extracted. The performance of the simulation scheme has been compared with the commercial and laboratory samples in the world. Due to the deviation of all dosimeters with a flat energy response, in this paper, has been used an idea of one semi-conductor sensor to have the flat energy-response in the entire neutron energy range. Finally, by analyzing of the sensors data as arrays for the first time, we have reached a nearly flat and acceptable energy-response. Also a comparison has been made between Lucite-PMMA ($H_5C_5O_2$) and polyethylene-PE ($CH_2$) as a radiator and $B_4C$ has been studied as absorbent. Moreover, in this paper, the effect of gamma dose in the dosimeter has been investigated and shown around the standard has not been exceeded.

• 한국항공운항학회지
• /
• 제32권2호
• /
• pp.112-123
• /
• 2024

Responding to rapid changes of global supply chain and fast increasing air cargo volume and demand for e-commerce market, this paper researched the development plans for regional airport specially focused on air cargo logostics through policy research. According to this research, political implications and development plans for Cheong Ju airport (CJJ) to become a part of global supply chain, a regional air cargo hub. Firstly, it is necessary to increase the length of the existing runway from 2,744m to 3,200m or to develop 3^rd runway only for a civil aircraft use. Secondly, it is inevitable to develop new air cargo terminal to handle and export such high value-added products as semi-conductor or rechargeable battery through airport. In addition, facing re-shoring trends among global supply chain, CJJ can increase its air cargo volume and also provide feeder service to Incheon airport, inducing global distribution center near airport site.

• Archives of Metallurgy and Materials
• /
• 제64권2호
• /
• pp.623-626
• /
• 2019

Rare earth Nd-Fe-B, a widely used magnet composition, was synthesized in a shape of powders using gas atomization, a rapid solidification based process. The microstructure and properties were investigated in accordance with solidification rate and densification. Detailed microstructural characterization was performed by using scanning electron microscope (SEM) and the structural properties were measured by using X-ray diffraction. Iron in the form of α-Fe phase was observed in powder of about 30 ㎛. It was expected that fraction of Nd₂Fe₁₄B phase increased rapidly with decrease in powder size, on the other hand that of α-Fe phase was decreased. Nd-rich phase diffused from grain boundary to particle boundary after hot deformation due to capillary action. The coercivity of the alloy decreased with increase in powder size. After hot deformation, Nd₂Fe₁₄B phase tend to align to c-axis.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.160-166
• /
• 2018

세계적으로 반도체장비 시장은 오래전부터 성장하고 있다. 유체제어시스템은 반도체 제조 장비에 사용되어지는 배관을 집적화시켜 유체의 공급을 제어할 수 있도록 모듈화, 소형화한 시스템이다. 반도체의 제조공정은 여러 종류의 맹독성 가스를 필수적으로 다루어야 한다. 특히 실제 작업 공정에서는 이러한 맹독성 가스의 정밀한 제어가 필요하다. 이러한 맹독성가스를 제어하는 시스템은 피팅, 밸트, 튜브, 필터, 레귤레이터 등 다양한 부품들로 구성되어 있다. 이 부품들은 누출 없이 고압 가스를 계속 제어해야 하기 때문에 정밀하게 제조되어야 하고 내부식성이 있어야 한다. 이를 위해 금속 블록 및 금속 가스킷의 표면 가공 및 경화 기술을 연구해야 한다. 본 논문에서는 이러한 유체제어시스템에서 가장 기본이 되는 V-Block의 직경, 유량, 각도를 다르게 설계하여 내부에서 어떠한 유동흐름을 보이는지 파악하고자 하며, 유체제어시스템에서 가장 기본이 되는 유체제어벨브 시스템의 내부 유동해석을 통하여 안정적인 유량을 공급할 수 있는 설계의 최적화에 대해 연구하고 분석하였다.

• 마이크로전자및패키징학회지
• /
• 제7권2호
• /
• pp.21-27
• /
• 2000

반도체 공정의 발전에 의해 새롭게 요구되어지는 underfill의 개발을 위해, epoxy/anhydride/ cobalt(II)촉매와 크기가 다른 두 종류(1 $\mu\textrm{m}$, 8 $\mu\textrm{m}$)의 용융 실리카를 충진제로 하여 충진율에 따른 시료의 물성을 측정하고 결과 값의 상호관계를 분석하였다. 우선 $80^{\circ}C$의 흐름공정에서는 경화반응을 일으키지 않고, 성형공정에서 빠른 경화와 100% 경화를 얻기 위해서는 15분간 $160^{\circ}C$로 경화시킨다는 조건에서 1.0 wt%의 촉매가 요구된다는 것을 경화 profile을 이용하여 알 수 있었다. 필러 충진에 따른 표면장력과 점도의 변화 관찰을 통해, real flow가 점도의 변화에 따라 급격한 변화를 보이는 것을 확인할 수 있었다. 1 $\mu\textrm{m}$의 필러가 충진된 시료의 경우 만족할 만한 흐름성을 보여주지 못하였지만 점도개선을 통해 gap크기가 작은 새로운 공정에 적절히 이용되리라 판단되며, 8 $\mu\textrm{m}$의 필러가 충진된 시료의 경우는 55~60 vol%에서 높은 흐름성을 나타내고 있다. 마지막으로 Matthew 모델은 높은 점도- 낮은 표면장력 underfill의 경우에만 침투거리 예측이 가능한 것을 확인할 수 있었다.