• Journal of Technologic Dentistry
• /
• v.34 no.2
• /
• pp.95-103
• /
• 2012

Purpose: Fracture strength of all-ceramic 3-unit fixed partial dentures manufactured by CAD/CAM and copy-milling systems were evaluated. Methods: Zirconia cores were made by milling the pre-sintered zirconia block by CAD/CAM or copy milling method followed by subsequent sintering. By building-up the corresponding porcelains on the core, all-ceramic bridges were fabricated, and those were evaluated in comparison with PFM fixed partial denture. Results: During the flexural test of the 3-unit PFM bridge, the porcelain started to chip or break at 507.28(${\pm}62.82$)kgf and the metal framework did not break until the maximum load level of 800kgf which was set in the testing instrument of this study. However, among all-ceramic restoration test groups, Everest(EV) group showed a peeling off or breakage of the porcelain from 365.64(${\pm}64.96$)kgf and the core was broken at 491.77(${\pm}55.62$)kgf. Those values of Zirkonzahn(ZR) were 431.03(${\pm}58.47$)kgf and 602.74(${\pm}48.44$)kgf, respectively. The break strength of the porcelain of PFM(PM) group was significantly higher than that of EV (p<0.05) group and there was no significant difference when comparing to that of ZR (p>0.05). ZR group showed higher break strength than that of EV group however there was no significant difference (p>0.05). The break strength of cores were in the increasing order of EV < ZR < PM (p<0.05). Conclusion: We could find that even though the PM group fractured at much higher value than all-ceramic cores, the breakage values of the porcelain of PM group with crack formation or delamination, which will be regarded as clinical failure, was significantly higher than that of EV group and not significantly higher than that of ZR group at p-values of 0.05. The break strength of ZR group was higher than that of EV group at an insignificant level(p>0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4822-4831
• /
• 2012

During the 2000s there were changes in the educational facility policy having impact on school architecture, such as departmental classroom system by the 7th national curriculum and BTL projects. Especially for secondary school architecture with the new keyword of 'departmental classroom system' unlike elementary school with the well-known keyword of 'open classroom', the emergence of new school architecture was anticipated. For these reasons it is worth while to notice secondary school architecture in the 2000s and this study aims to review the architectural characteristics of middle schools as first step. Cases of 18 schools selected by EDUMAC were analyzed focused on site planning and planning characteristics of each spaces. Through the analysis, the architectural characteristics of middle schools in the 2000s are summarized and comments on some problems are made. In summary, case schools have typical characteristics of Korean school architecture in unit classrooms and block plan for daylight condition. On the other hand, they have more diversity in space organization and facility program. But it leave something to be desired in expressing urban architectural characteristics, traditionality and locality with searching for new school architecture.

• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.469-477
• /
• 2000

Bisphenol-A (BPA), a known endocrine disruptor, is a main building block of epoxy resin which is widely used as a coating agent in residential water storage tanks. Therefore, BPA leaching from the epoxy resin may have adverse effects on human health. The possibility of BPA leaching from three epoxy resins were tested with a modified KS D 8502 method at 20, 50, 75 and $100^{\circ}C$ in deionized water and the specified test water, respectively. BPA leached to the test water was identified using GC-MS and quantified with GC-FID after a sequential extraction and concentration. The results showed that BPA leaching has occurred in all three samples tested. The quantify of BPA leaching from unit area of epoxy resin coating was in the range of $10.677{\sim}273.120{\mu}g/m^2$ for sample A, 29.737~1734.045 for sample B and 52.857~548.778 for sample C depending on the test temperature, respectively. In general, the amount of BPA leaching increased as the water temperature increases. This result implies a higher risk of BPA leaching to drinking water during a hot summer season. In addition, microbial growth, measured by colony forming units, in epoxy coated water tanks was higher than that in a stainless steel tank suggesting that compounds leaching from epoxy resin may support the growth of microorganisms in a residential water holding tank.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.75-82
• /
• 2000

In this paper, a new low power 16-bit ALU has been designed, fabricated and tested at the transistor level. The designed ALU performs 16 instructions and has a two-stage pipelined architecture. For the reduction of switched capacitance, the ELM adder of the proposed ALU is inactive while the logical operation is performed and P(propagation) block has a dual bus architecture. A new efficient P and G(generation) blocks are also proposed for the above ALU architecture. ELM adder, double-edge triggered register and the combination of logic style are used for low power consumption as well. As a result of simulations, the proposed architecture shows better power efficient than conventional architecture$^{[1,2]}$ as the number of logic operation to be performed is increased over that of arithmetic to logic operation to be performed is 7 to 3, compared to conventional architecture. The proposed ALU was fabricated with 0.6${\mu}m$ single-poly triple-metal CMOS process. As a result of chip test, the maximum operating frequency is 53MHz and power consumption is 33mW at 50MHz, 3.3V.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.2
• /
• pp.7-13
• /
• 2011

This paper presents a Time-to-Digital Converter which is a key block of an All-Digital Phase Locked Loop. In this work, a Vernier Delay Line is added in a conventional Gated Ring Oscillator, so it could get multi-phases and a high resolution. The Gated Ring Oscillator uses 7 unit delay cell, the Vernier Delay Line is used each delay cell. So proposed Time-to-Digital Converter uses total 21 phases. This Time-to-Digital Converter circuit is designed and laid out in $0.13{\mu}m$ 1P-6M CMOS technology. The proposed Time-to-Digital Converter achieves 26ps resolution, maximum input signal frequency is 100MHz and the digital output of proposed Time-to-Digital Converter are 8-bits. The proposed TDC detect 5ns phase difference between Start and Stop signal. A power consumption is 8.4~12.7mW depending on Enable signal width.

• Journal of the Korean Geographical Society
• /
• v.46 no.1
• /
• pp.67-80
• /
• 2011

Choropleth mapping of population distribution is based on the assumption that people are uniformly distributed throughout each enumeration unit. Dasymetric mapping technique improves choropleth mapping by refining spatially aggregated data with residential information. Further, pycnophylactic interpolation can upgrade dasymetric mapping by considering population distribution of neighboring areas, while preserving the volumes of original units. This study proposed a combined solution of dasymetric mapping and pycnophylactic interpolation to improve the accuracy of population density distribution. Specifically, the dasymetric method accounts for the spatial distribution of population within each census unit, while pycnophylactic interpolation considers population distribution of neighboring area. This technique is demonstrated with 1990 census data of the Athens, GA. with land use land cover information derived from remotely-sensed imagery for the areal extent of populated areas. The results are evaluated by comparison between original population counts of smaller census units (census block groups) and population counts of the grid map built from larger units (census tracts) aggregated to the same areal units. The estimated populations indicate a satisfactory level of accuracy. Population distribution acquired by the suggested method can be re-aggregated to any type of geographic boundaries such as electoral boundaries, school districts, and even watershed for a variety of applications.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.347-356
• /
• 2019

Various studies regarding the sedimentary environment, depositional age, provenance, and metamorphic history have been carried out on the Taean Formation in the western part of Gyeonggi Massif, since the unique detrital zircon age pattern was revealed. This review paper introduces the previous researches on the Taean Formation and discusses the depositional age and provenance. The Taean Formation was traditionally regarded as a Precambrian stratigraphic unit, but recently it is interpreted to be a middle or upper Paleozoic formation due to the occurrence of large amounts of Early to Middle Paleozoic detrital zircons. The Taean Formation consists of metasandstone, argillaceous schist, and phyllite which are mainly made up of quartz and mica. The protoliths are interpreted as turbidites deposited in deep sea fan environment. The Taean Formation has been interpreted to be deposited between the Devonian to Triassic ages given the age differences between detrital zircons and intrusive rocks. There are two opinions that the deposition age is close to the Devonian or the Permian period. The provenance of this formation is supposed to be South China block, Chinese collisional belt, or Gyeonggi Massif. Given the available detrital zircon ages of the Taean Formation and other Korean (meta)sedimentary rocks, the Taean Formation shares major source rocks with Yeoncheon Group and Pibanryeong Unit of the Okcheon Supergroup, but their source regions are not entirely consistent. Considering the existing hypotheses about the depositional timing and provenance, we put weight on the possibility that the Taean Formation was deposited between Permian and Early Triassic periods. However, further studies on the stratigraphy and sedimentary petrology are needed to clarify its definition and to elucidate the provenance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.63-72
• /
• 2017

This paper proposes a procedure to improve the operational efficiency of the automotive parts manufacturing process by applying classical IE techniques composed of process analysis, work method analysis, and motion analysis, and a specific application case is outlined. The proposed procedure was developed originally by the Task Force organized in L company's automotive parts manufacturing business unit. The balance efficiency and production capacity were used as measures of operational efficiency. The developed procedure follows the general procedure of analyzing the phenomenon at the manufacturing shop, deriving an improvement solution to solve the problem, evaluating each derived alternative, and implementing it to the field to achieve productivity improvement. Among the methods used in each phase of the procedure, function analysis used in the waste discovery phase and R&R evaluation method used in the alternative assessment phase are unique techniques developed by L company's TF. The R&R Evaluation method techniques are described in detail because this method is highly applicable and extensible. A case of applying developed procedures to improve the EPS motor manufacturing process is discussed. As a result, the line balance efficiency and production capacity were increased to a satisfactory level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5355-5362
• /
• 2014

This study reviewed the planning characteristics of dormitories for secondary schools in the Japanese Colonial Era by analyzing the architectural drawings collected by the National Archives of Korea. The dormitory was one of the essential facilities in secondary schools but there have been few studies in this area. The analysis items were the site plan and the planning characteristics of student bedrooms, dining hall, and supervisor's area, which were the main elements of the dormitory. The results of this study were summarized as follows. 1) Generally, the dormitory area was placed in the rear of buildings for teaching with a close connection. 2) The student bedroom wings were laid out in parallel to the south as a rule making the typical site plan pattern for a dormitory, whereas the other parts of dormitory, such as the dining hall and supervisor's area were placed in the site conditions. 3) Generally, the unit plans of bedrooms for Korean schools were the ondol type and were small in size, whereas those for Japanese were the tatami type and large in size with separate study and sleeping areas. 4) The dining hall annex was made up of a dining hall and kitchen-bathroom area in general. For Japanese schools, the school store area was added to these areas. The typical shapes of dining hall plans were narrow and long with an adjacent corridor, so the overall plan of the dining hall annex was like that of a single-corridor type block plan. 5) The supervisor's area was a smaller part of the dormitory but it was considered to be a symbolic part of the whole dormitory in site planning and design.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.505-512
• /
• 2014

A new donor-accepter-donor-accepter-donor (D-A-D-A-D) type 2,1,3-benzothiadiazole-thiophene-based acceptor unit 2,5-di(4-(5-bromo-4-octylthiophen-2-yl)-2,1,3-benzothiadiazol-7-yl)thiophene ($DTBTTBr_2$) was synthesized. Copolymerized with fluorene and indeno[1,2-b]fluorene electron-rich moieties, two alternating narrow band gap (NBG) copolymers PF-DTBTT and PIF-DTBTT were prepared. And two copolymers exhibit broad and strong absorption in the range of 300-700 nm with optical band gap of about 1.75 eV. The highest occupied molecular orbital (HOMO) energy levels vary between -5.43 and -5.52 eV and the lowest unoccupied molecular orbital (LUMO) energy levels range from -3.64 to -3.77 eV. Potential applications of the copolymers as electron donor material and $PC_{71}BM$ ([6,6]-phenyl-$C_{71}$ butyric acid methyl ester) as electron acceptors were investigated for photovoltaic solar cells (PSCs). Photovoltaic performances based on the blend of PF-DTBTT/$PC_{71}BM$ (w:w; 1:2) and PIF-DTBTT/$PC_{71}BM$ (w:w; 1:2) with devices configuration as ITO/PEDOT: PSS/blend/Ca/Al, show an incident photon-to-current conversion efficiency (IPCE) of 2.34% and 2.56% with the open circuit voltage ($V_{oc}$) of 0.87 V and 0.90 V, short circuit current density ($J_{sc}$) of $6.02mA/cm^2$ and $6.12mA/cm^2$ under an AM1.5 simulator ($100mA/cm^2$). The photocurrent responses exhibit the onset wavelength extending up to 720 nm. These results indicate that the resulted narrow band gap copolymers are viable electron donor materials for polymer solar cells.