• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권1호
• /
• pp.48-52
• /
• 2014

In this paper, scaling down characteristics of vertical channel phase random access memory are investigated with device simulator and finite element analysis simulator. Electrical properties of select transistor are obtained by device simulator and those of phase change material are obtained by finite element analysis simulator. From the fusion of both data, scaling properties of vertical channel phase change random access memory (VPCRAM) are considered with ITRS roadmap. Simulation of set reset current are carried out to analyze the feasibility of scaling down and compared with values in ITRS roadmap. Simulation results show that width and length ratio of the phase change material (PCM) is key parameter of scaling down in VPCRAM. Thermal simulation results provide the design guideline of VPCRAM. Optimization of phase change material in VPCRAM can be achieved by oxide sidewall process optimization.

• 한국연소학회지
• /
• 제17권4호
• /
• pp.30-37
• /
• 2012

The flame lengths and NOx emission characteristics of syngas $H_2$/CO turbulent non-premixed jet flames were investigated. The flame length which is the main parameter governs NOx emission was studied for various syngas compositions. The flame length was compared with previous correlation between Froude number and flame height and it shows that they have good agreements. It was confirmed that the turbulent jet flames herein investigated are in the region of buoyancy-momentum transition. NOx emission was reduced with increased Reynolds number and CO contents in syngas fuel and with decreased fuel nozzle diameter which is attributed by decreased flame residence time. Previous EINOx scaling based on flame residence time of $L_f^3/(d_f^2U_f)$ satisfies only the jet flame in momentum-dominated region, not buoyancy-momentum transition region. The simplified flame residence time ($L_f/U_f$) was adopted in modified EINOx scaling. The modified scaling satisfies the jet flames not only in momentum-dominated region but in buoyancy-momentum transition region. The scaling is also satisfied with $H_2$/CO syngas jet flames.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.586-591
• /
• 1992

In this paper a robust stabilization problem is discussed for plant with both time-varying parameter perturbations and unstructured uncertainty. It is shown that, a robust L$_{2}$-stabilizing controller can be obtained by solving an H$_{\infty}$ standard problem with a scaling parameter. Using an H$_{\infty}$ design method, a robust L$_{2}$-stabilizing controller is derived. Finally, a numerical example is given.n.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.339-340
• /
• 2008

This paper presents a novel design of the printed hyperpolar-transformed Sierpinski Carpet (HSC) antenna. By hyperpolar transforming the Sierpinski carpet geometry, from isotropic scaling symmetry to equiangular scaling symmetry, we get improved performance rather than that of the general Sierpinski Carpet antenna. The design parameter and performance of the proposed monopole antenna are investigated by simulation. And we showed that proposed HSC geometry gives more freedom for wideband antenna design such as flare angle, (angular)scale factor.

• 전자공학회논문지B
• /
• 제28B권5호
• /
• pp.327-334
• /
• 1991

This paper proposes an efficient method of implementing the generalized Hough transform (GHT), which has been hindered by an excessive computing load and a large memory requirement. The conventional algorithm requires a parameter space of 4 dimensions in detection a rotated, scaled, and translated object in an input image. Prior to the application of GHT to the input image, the proposed method determines the angle of rotation and the scaling factor of the test image using the proportion of the edge components between the reference image and test image. With the rotation angle and the scaling factor already determined, the parameter spaceis to be reduced to a simple array of 2 dimensions by applying the unit GHT only one time. The experiments with the image of airplanes reveal that both of the computing time and the requires memory size are reduced by 95 percent, without any degradatationof accuracy, compared with the conventional GHT algorithm.

• 대한전자공학회논문지SD
• /
• 제42권3호
• /
• pp.1-8
• /
• 2005

본 논문에서는 $0.1\;{\mu}m$ 이하의 게이트 길이를 갖는 MHEMT의 DC 및 RF 특성을 상용 시뮬레이터인 ISE-TCAD tool을 이용하여 결과를 고찰하였다. 이후 MHEMT의 게이트 길이와, 소스-드레인 간격 및 채널 두께를 변화시켜 가면서 소자의 수평, 수직 Scaling효과가 소자 특성에 미치는 영향을 비교하였으며, 게이트 길이 $(L_g)$가 $0.1\;{\mu}m$ 이하로 감소함에 따라 $g_{m,max}$가 같이 감소하는 현상에 대해서 논의해 보았다. 또한 이 현상을 가지고 소자의 횡적, 종적 파라미터의 scaling 효과에 대한 모델을 제시 했다.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.111-118
• /
• 2016

스케일링은 겨울철 제설제 살포 및 동결융해의 복합작용으로 인하여 교통시설 구조물에서 발생하는 대표적인 콘크리트의 성능저하 현상이다. 본 논문에서는 콘크리트의 스케일링 저항성에 영향을 미치는 요인을 분석하기 위하여 콘크리트의 역학적 성능, 공극구조 특성과 스케일링 저항성과의 관계를 실험적으로 고찰하였다. 실험결과, 콘크리트의 스케일링 저항성은 콘크리트의 압축강도와는 그다지 상관관계가 적었으며, 오히려 콘크리트의 표면투수 특성과 밀접한 관련이 있는 것으로 조사되었다. 또한, 콘크리트의 스케일링 저항성을 평가하기 위한 파라미터로써, 기포 간극계수 및 비표면적은 적합하지 않은 것으로 나타났다. 한편, 결합재의 종류에 따른 스케일링 저항성도 상이하게 나타났으며, 보통포틀랜드시멘트 콘크리트 및 실리카흄 콘크리트에 비하여 고로슬래그미분말을 사용한 콘크리트의 스케일링 저항성이 상대적으로 낮은 것으로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제24권6호
• /
• pp.733-738
• /
• 2003

Linear scaling quantum theories are reviewed especially focusing on the method adopted in GAMESS. The three key translation equations of the fast multipole method (FMM) are deduced from the general polypolar expansions given earlier by Steinborn and Ruedenberg. Simplifications are introduced for the rotation-based FMM that lead to a very compact FMM formalism. The OPS (optimum parameter searching) procedure, a stable and efficient way of obtaining the optimum set of FMM parameters, is established with complete control over the tolerable error ε. In addition, a new parallel FMM algorithm, requiring virtually no inter-node communication, is suggested which is suitable for the parallel construction of Fock matrices in electronic structure calculations.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.380-390
• /
• 1998

In the present work a finite element formulation using dynamic explicit time integration scheme is used for numerical analysis of auto-body panel stamping processes. The lumping scheme is employed for the diagonal mass matrix and linearizing dynamic formulation. A contact scheme is developed by combining the skew boundary condition and direct trial-and-error method. In this work, for economic analysis the faster punch velocity and the mass scaling method are introduced. To investigate the effects of punch velocity and mass scaling, the various values of punch velocity and the various mass scalings are used for numerical analysis. Computations are carried out for analysis of complicated auto-body panel stamping processes such as forming of an oil pan and a fuel tank.

• 대한기계학회논문집A
• /
• 제21권11호
• /
• pp.1931-1942
• /
• 1997

A new load/displacement parameter method is developed for the cases that loads are applied to one or more points, and displacements of a structure are controlled at one or more points sinultaneously. The procedure exploits a generalized Riks method, which utilizes load/displacement parameters as scaling factors in order to analyze the post-buckling phenomena including snap-through or snap-back. A convergence characteristic is improved by employing new relaxation factors in incremental displacement parameter, particularly at the region where exhibits severe numerical instability. The improved performance is illustrated by means of numerical example.