• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.372-376
• /
• 2004

Digital memory circuits have been developed very fast according to the progress of semiconductor technology But It was very difficult to memorize a high frequency radio signal. Many years ago an analog loop was used for store of radio frequency signal, and the digital radio frequency memory was made to the development of wideband amplifier and high speed sampler. We present a design of wide-band DRFM using Johnson code and the simulation results with respect to the sampling speed. in this paper.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.233-236
• /
• 2004

This paper proposes new method for the enhancement of nonexistent high frequency spectral contents from low sample rate audio signal. For example, Due to the protocol constraint, the audio bandwidth of MP3 is restricted to 16Khz. Although band-restricted MP3 audio provide savings of storage space and network bandwidth, it suffers a major problem of a loss in high frequency fidelity such as localization, ambient information, and bright nature of audio. This paper provides a new mathematical analysis for the adaptive estimation of the high frequency contents based on the nature of the input low sample rate audio. Proposed method can be worked globally to any kind of audio such as speech and music that are restricted by sampling rate and bandwidth.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.140-145
• /
• 2010

The monitoring and the diagnosis of the faults in induction motors starting from the stator current are very interesting, since it is an accessible and measurable quantity. The spectral analysis of the stator current makes it possible to highlight the characteristic frequencies of the faults but in a wide frequency range depending on half the sampling frequency, making it very difficult to monitor on-line the faults. In order to facilitate the use of the relevant frequencies of machine faults we proposed the extraction of the frequency components using two methods, namely, the amplitude and the instantaneous frequency. The theoretical bases of these methods were presented and the results were validated on a test bench with an induction motor of 5.5 kw.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.943-948
• /
• 2020

In this paper, we developed a fiber optic interferometer system based on frequency-swept laser. This frequency-swept laser with an external-cavity structure can generate a high coherent light with a linewidth of 132 kHz at 1552 nm. It also shows a superior swept linearity of R2 = 0.99995 under repetition rate of 200 kHz due to absence of mechanical moving parts in the laser cavity. By using a piezoelectric fiber optic stretcher, various vibration experiments were implemented, such as 0.5 to 2.0 kHz vibration signals with intervals of 0.5 kHz, with a sampling rate of 7 kHz. Real-time peak tracking can be successfully recovered according to the applied vibration frequency with high linearity of R2 = 0.99983.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.174-182
• /
• 2014

To monitor the wind-induced responses of buildings, conventional real-time kinematic (RTK) methods based on two global positioning system (GPS) receivers (e.g., a reference and a rover) are widely applied. However, these methods can encounter problems such as difficulty in securing and maintaining a space for a reference station. With the recently developed virtual reference station (VRS)-RTK approach, the position of a structure can be measured using only a rover receiver. In this study, to evaluate the applicability of VRS-RTK methods in monitoring the lateral structural responses of frame structures, we performed free vibration tests on a one-story frame model (the first natural frequency of 1 Hz) and a three-story frame model (the first natural frequency of 0.85 Hz). To assess the reliability of the displacement and acceleration responses measured by the GPS, we performed a concurrent measurement using laser displacement sensors and an accelerometer. The accelerometer results were consistent with the GPS measurements in terms of the time history and frequency content. Furthermore, to derive an appropriate sampling rate for the continuous monitoring of buildings, the errors in the displacement responses were evaluated at different GPS sampling rates (5, 10, 20 Hz). The results indicate that as the sampling rate increased, the errors in the displacement responses decreased. In addition, in the three-story model, all modal components (first, second, and third modes) could be recorded at a sampling rate of 20 Hz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.6
• /
• pp.35-42
• /
• 2010

This paper describes a 10 bit 80MHz CMOS D/A converter for wireless communication system. The proposed circuit in the paper is implemented with a $0.18{\mu}m$ CMOS n-well 1-poly 6-metal process. The architecture of the circuit consists of the 4bit LSB with binary decoder, and both the 3bit ULSB and the 3bit MSB with the thermometer decoder. The measurement results demonstrates SFDR of 60.42dBc at sampling frequency 80MHz, input frequency 1MHz and ENOB of 8.75bit. INL and DNL have been measured to be ${\pm}$0.38LSB and ${\pm}$0.32LSB and glitch energy is measured to be 4.6$pV{\cdot}s$. Total power dissipation is 48mW at 80MHz(maximum sampling frequency) with a single power supply of 1.8V.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.5
• /
• pp.344-352
• /
• 2018

We herein propose a calibration method for a sampling oscilloscope. The proposed method can correct the systematic errors in the oscilloscope such as time-based distortion and impedance mismatch. In addition, it can accurately estimate the residual jitter that remains after a time-based correction and the scale factor that varies in accordance with the setting of the pulse generator. The proposed method is validated thorough the comparison and verification with the power meter, and the uncertainty of the measurement method is analyzed.

• Ocean and Polar Research
• /
• v.30 no.2
• /
• pp.149-158
• /
• 2008

The characteristic analysis of the estimated population parameters, i.e., standard deviation and error bound of coastal pollutant concentrations (hereafter PC, i.e., COD, TN, and TP concentrations), was carried out by using environmental data with different sampling frequency in Lake Shihwa and Incheon coastal zone. The results clearly show that standard deviation of the PC increases as its mean value increases. The error bounds of the annual mean values based on seasonally measured DO concentrations and PC data in Incheon coastal zone were estimated as ranges 2.26 mg/l, $0.68{\sim}0.86\;mg/l$, $0.62{\sim}0.80\;mg/l$, and $0.074{\sim}0.082\;mg/l$, respectively. In terms of annual mean of the DO concentration and PC in Lake Shihwa, the error bounds based on monthly measured data from 1997 to 2003 were also estimated as ranges 4.0 mg/l, 3.0 mg/l, $0.5{\sim}1.0\;mg/l$, and 0.05 mg/l, respectively. The error bound on the basis of real-time monitoring data is $7{\sim}13%$ only as compared to that of monthly measured data.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.62-68
• /
• 2000

It was designed a high-speed analog input card that is a important device of ultrasonic testing flaw detector in the middle of non-destructive testing in this Paper. The A/D Board is inquired high-speed sampling rate and fast data acquisition system. This pater shows a design that has a function of Peak- Detection for ultrasonic testing by ISA Bus type and a 50MHz of A/D converter in order to do sampling more than quadruple frequency of transducer frequency.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.2
• /
• pp.65-72
• /
• 2006

In digital signal processing, the polyphase decomposition of signal has been often used in the implementation of multirate system. Especially, in the design of digital filter and so forth the method in very useful to improve the performance of various algorithms because it provides the multi-channel for paralled processing. Generally, the polyphase-decomposed signals tend to expand the frequency band by including more high frequencies than original signal from decimation for down sampling. This property brings about the significant limitation in the structure or the performance of digital polyphase signal processing system. In this paper we theoretically propose a perfect band compression and reconstruction method for polyphase component signals, then experimentally show its effectiveness through Matlab simulation.