• Journal of Adhesion and Interface
• /
• v.14 no.3
• /
• pp.128-134
• /
• 2013

This study investigated the natural adhesives for ceramics conservation that can be used as a substitution for synthetic resins. Samples were prepared by mixing lacquer with animal glue and the structure and adhesion properties of the samples were analyzed. The structure analysis with FT-IR showed that carbonyl (C=O), amine (N-H) and aromatic (C=C) bonds are increased by adding animal glue on lacquer. Comparing to the viscosity and tensile strength of the sample to the Paraloid B-72 and Araldite rapid type, these natural adhesives can be a substitution for the synthetic resins. Through methodical and intensive study, we expect practical uses of this eco-friendly natural adhesives for ceramics conservation.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.35-42
• /
• 2017

Purpose: The purpose of this paper was to evaluate the occurrence of errors regarding adaptation by conducting a three-dimensional assessment comparing the bridge type dental restoration after the cutting process, which has multiple abutments, with a single type dental restoration. Methods: By using ten identical files obtained by scanning the master model, thirty designs were created consisting of ten maxillary right first premolars and ten maxillary right first molars with single crown abutments, along with ten bridge designs with the identical abutment. A 5-axis milling machine was used to produce the design file. The produced denture prostheses were scanned using a silicone replica for a STL file. An evaluation was conducted using 3D analysis software on the master model and each of the thirty data files. Results: The RMS value of the pre-molar (14) was $38.4{\pm}4{\mu}m$ for single and $54.7{\pm}6{\mu}m$ for bridge abutment; therefore, a statistically significant difference was observed for single and bridge designs although both shared the same abutment form (P<.05). Also, the RMS value of the molar (16) was $47.6{\pm}2{\mu}m$ and $56.6{\pm}5{\mu}m$ for the single and bridge designs, respectively, thereby presenting a statistically significant difference (P<.05). Conclusion: As a result, dental prosthesis fabricated using the single method presented better internal adaptation outcomes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.13 no.5
• /
• pp.59-80
• /
• 2010

This research This research aims at developing systemic evaluation model in terms of biotope preservation through reports, literatures, and expert survey analysis by implementing biotope structure analysis in area level with selecting Hyunpoong and Yuga-myeon, Dalseong county, Daegu metropolitan city as a site. First of all, as a result of biotope type classification of research site, biotope type groups are classified into total 13, and its biotope types are divided into total 61. Also, as a result of literature analysis, total 18 items are drawn such as diversity of biotope typical species as a index item to assess the preservation value of biotope, and the first evaluation index are divided into 10 and the second ones are divided into 8 according to characteristic of index items. As a result of expert survey analysis, All 10 index items, first evaluation index, show high importance average (above 4.7). As a result of implementation of main cause for categorizing evaluation index by characteristic, there are 3 factors such as 'obstructive factor.' Based on above survey analysis result, as a result of estimating the weight of each item, 'restoration factor' showed the highest, 3.4541, but 'factor of habitat stability' showed 3.1468, which is the lowest The systemic value evaluation was set by comprehensively analyzing these results. As a result of biotope preservation value evaluation through applying research site, total 19 types which are abundant in vegetation are classified into I class, 12 types in II class, 5 types in III class, 10 types in IV class, and 15 types in V class respectively. Lastly, as a result of second evaluation, it is analyzed that there are 17 special meaningful space to preserve species and biotope(1a, 1b) and 61 meaningful space to preserve species (2a, 2b, 2c).

• The Journal of Advanced Prosthodontics
• /
• v.14 no.4
• /
• pp.223-235
• /
• 2022

PURPOSE. To compare the clinical outcomes of two types of implant restoration for posterior edentulous area, 3-unit bridge supported by 2 implants and 3 implant-supported splinted crowns. MATERIALS AND METHODS. The data included 127 implant-supported fixed restorations in 85 patients: 37 restorations of 3-unit bridge supported by 2 implants (2-IB), 37 restorations of 3 implant-supported splinted crowns (3-IC), and 53 single restorations (S) as controls. Peri-implantitis and mechanical complications that occurred for 14 years were analyzed by multivariable Cox regression model. Kaplan-Meier curves and the multivariable Cox regression model were used to analyze the success and survival of implants. RESULTS. Peri-implantitis occurred in 28.4% of 2-IB group, 37.8% of 3-IC group, and 28.3% of S control group with no significant difference. According to the implant position, middle implants (P2) of the 3-IC group had the highest risk of peri-implantitis. The 3-IC group showed a lower mechanical complication rate (7.2%) than the 2-IB (16.2%) and S control group (20.8%). The cumulative success rate was 52.8% in S (control) group, 62.2% in 2-IB group, and 60.4% in 3-IC group. The cumulative survival rate was 98.1% in S (control) group, 98.6% in 2-IB group, and 95.5% in 3-IC group. There was no significant difference in the success and survival rate according to the restoration type. CONCLUSION. The restoration type was not associated with the success and survival of implants. The risk of mechanical complications was reduced in 3 implant-supported splinted crowns. However, the middle implants of the 3 implant-supported splinted crowns had a higher risk of peri-implantitis.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.26 no.3
• /
• pp.29-42
• /
• 2023

As the destruction of habitats due to recent development continues, there is also increasing interest in endangered species. Mankyua chejuense is a vulnerable species that is sensitive to changes in population and habitat, and it has recently been upgraded from Endangered Species II to Endangered Species I, requiring significant management efforts. So in this study, we analyzed the potential habitats of Mankyua chejuense using MaxEnt(Maximum Entropy) modeling. We developed three models: one that considered only environmental characteristics, one that considered artificial factors, and one that reflected the habitat of dominant tree species in the overstory. Based on previous studies, we incorporated environmental and human influence factors for the habitats of Mankyua chejuense into spatial information, and we also used the habitat distribution models of dominant tree species, including Ulmus parvifolia, Maclura tricuspidata, and Ligustrum obtusifolium, that have been previously identified as major overstory species of Mankyua chejuense. Our analysis revealed that rock exposure, elevation, slope, forest type, building density, and soil type were the main factors determining the potential habitat of Mankyua chejuense. Differences among the three models were observed in the edges of the habitats due to human influence factors, and results varied depending on the similarity of the habitats of Mankyua chejuense and the dominant tree species in the overstory. The potential habitats of Mankyua chejuense presented in this study include areas where the species could potentially inhabit in addition to existing habitats. Therefore, these results can be used for the conservation and management planning of Mankyua chejuense.

• Restorative Dentistry and Endodontics
• /
• v.35 no.1
• /
• pp.30-39
• /
• 2010

This study evaluated the influence of the type of restoration and the amount of interdental spacing on the stress distribution in maxillary central incisors restored by means of porcelain laminate veneers and direct composite resin restorations. Three-dimensional finite element models were fabricated to represent different types of restorations. Four clinical situations were considered. Type I, closing diastema using composite resin. Labial border of composite resin was extended just enough to cover the interdental space; Type II, closing diastema using composite resin without reduction of labial surface. Labial border of composite resin was extended distally to cover the half of the total labial surface; Type III, closing diastema using composite resin with reduction of labial surface. Labial border of the preparation and restored composite resin was extended distally two-thirds of the total labial surface; Type IV, closing diastema using porcelain laminate veneer with a feathered-edge preparation technique. Four different interdental spaces (1.0, 2.0. 3.0, 4.0 mm) were applied for each type of restorations. For all types of restoration, adding the width of free extension of the porcelain laminate veneer and composite resin increased the stress occurred at the bonding layer. The maximum stress values observed at the bonding layer of Type IV were higher than that of Type I, II and III. However, the increasing rate of maximum stress value of Type IV was lower than that of Type I, II and III.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.41-54
• /
• 2006

In case of leaving artificial slopes resulting from large-scale constructions, there may be secondary damage caused by soil loss due to erosion and collapse. Furthermore, slope-restoring constructions have a few problems such as monotonous landscape and difficult succession of secondary vegetation due to reckless use of exotic grass, despite attaining the initial purpose of revegetation. To settle this problem, selected plants deemed to be proper for revegetation were used on one of thin vegetation base methods, CODRA SYSTEM, and made seeding mixture experimental plots considering germination rates differing in each season. Native herbs, native shrubs and exotic herbs contents were increased by 30% and 50% respectively, centered on seeding quantity(30g/$m^2$) used as design standard in the seed spray method, in order to figure out proper quantity for revegetation in each season.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.5
• /
• pp.92-100
• /
• 2009

This study was surveyed from May to October, 2008 in order to classify type distribution and evaluate the function of inland wetland as a ecological axis in Chungnam province. Assessment was done by modified-RAM (Rapid Assessment Method). RAM is consisted of total 8 functions and divided into high, moderate, low. The conservation grade of RAM is divided into 4 grades; absolute conservation, conservation, improvement and restoration. Throughout survey on total 13 wetlands of Lacustrine, Palustrine wetland which are distributed in Chungnam province, their function was assessed. As result, the 2 wetlands were judged as absolute conservation grade by assessment of 8 functional contents, and 7 sites were improvement wetlands and 4 sites were conservation wetlands. The function of wetlands assessed as conservation grade showed high in water quality protection and improvement. Also, showed high in vegetation diversity, wildlife habitat and aesthetic recreation. Meanwhile, showed low in Water quality purification, Shoreline/Stream Bank Protection. Of wetlands evaluated as conservation grade, Jeong-juk Ji and Dun-ri reservoir were assessed as absolute conservative area. These wetlands are essential to be managed continuously as a area having high ecological value. Farther, these wetlands will be done as a axis of ecological network related to 'Kumbuk jeongmaek' ecosystem.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.241-247
• /
• 2010

We propose and experimentally demonstrate a service-aware optical transport system. The proposed service-aware optical transport system makes a flow based on service type and priority of traffic. The generated flow is mapped to a corresponding sub-${\lambda}$ for transport over an optical network. Using sub-${\lambda}$ provided by the centralized control plane, we could effectively provide quality-of-service guaranteed Ethernet service and best-effort service simultaneously in a single link. The committed information rate (CIR) traffic and best-effort traffic are assigned to different sub-${\lambda}s$. The bandwidth of the CIR traffic is guaranteed without being affected by violation traffic because the bandwidth is managed per each sub-${\lambda}$. The failure detection time and restoration time from a link failure is measured to be about 60 ${\mu}s$ and 22 ms, respectively, in the ring network. The measured restoration time is much smaller than the 50 ms industry requirement for real-time services. The fast restoration time allows the proposed service-aware optical transport system to offer high availability and reliability which is a requirement for transport networks.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.8 no.4
• /
• pp.81-90
• /
• 2005

This study aimed to address problems and suggest solutions in applying seed mixture design criterior of the slope revegetation works according to "The guidelines of Slope revegetation design and construction" proposed by the Ministry of Construction and Transportation. To do this, the planting thickness was set to be the same 2cm while the composition of seeds was made different, which was planted in artificial slopes and fields. The main results were summarized as follows. In the test, when applying the provisional standards of the plant mixtures proposed by the Ministry of Construction and Transportation, tree seeds and native plants were found poor coverage effect in the early stage in all test plots due to introduced grasses. This was because introduced winter grasses which grew well in the early stage, could grow densely, so it might hamper the growth of other plants. Therefore, it was found desirable that standards for seed mixing should be adjusted down by 10% and the ratio of introduced grasses in the mixture should be lowered to 25% while native plants should increase to 20-25%.