• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.3
• /
• pp.295-305
• /
• 1994

Greenhouse and laboratory studies were conducted to investigate the allelopathic potential of alfalfa and vetch residues on soybean and corn using various extract concentrations (0, 5, 10, 15 and 20%, w/v) and residue rates (0, 0.25, 0.5, 0.75 and 1%, w/w). Aqueous extracts of alfalfa (Medicago sativa L.) and vetch (Vicia spp.) exhibited an allelopathic effect on soybean and corn seed germination, seedling length and weight. The degree of inhibition significantly increased as the aqueous extract concentration increased. Alfalfa and vetch 20% extracts reduced soybean seed germination, seedling length and weight by 35%, 57%, 32% and 15%, 42%, 25% respectively, when compared to control. Corn germination, seedling length and weight was inhibited by 20%, 23%, 38% by alfalfa and 19%, 18%, 35% by 20% vetch extracts. Alfalfa and vetch extracts inhibited secondary root formation and branching as the extract concentration increased. Alfalfa and vetch 20% extracts inhibited by 41% and 32% secondary root numbers, respectively as compared to control. It was found that the aqueous extract of alfalfa resulted in greater reduction in germination, seedling length and weight of soybean than that of vetch. Alfalfa and vetch 1% residue rate inhibited soybean plant height by 30% and 10%, leaf area by 31% and 23%, and dry weight by 18% and 1%, nodule number by 27% and 20% also. Alfalfa and vetch residue significantly enhanced plant height, leaf area and dry weight of corn. The maximum stimulation occurred with 0.25% and 1% of alfalfa and vetch residue rates, respectively. Plant height, leaf area, and dry weight increased by 23%, 59%, 58% and 17%, 52%, 94% with alfalfa and vetch residues of 0.25% and 1%, respectively. This study demonstrates that there is an allelopathic potential resulting from alfalfa and vetch residues on soybean growth and yield. It also suggests that these residues may affect crop growth and development due to the inhibitory or stimulatory effects of allelochemicals existing in the residue.

• East Asian mathematical journal
• /
• v.30 no.3
• /
• pp.321-326
• /
• 2014

In this paper, we present a simple proof of Corollary 3.3 in [5] using the fact that for a K3 surface of finite height over a field of odd characteristic, the height is a multiple of the non-symplectic order. Also we prove for a non-symplectic CM K3 surface defined over a number field the Frobenius invariant of the reduction over a finite field is determined by the congruence class of residue characteristic modulo the non-symplectic order of the K3 surface.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.265-270
• /
• 2001

Nowadays, like any other areas we have asked that the concrete would get more and more properties to increase there performance. So, in this research we are intended to develop the Photocatalytic Concrete which is one of the High Performance Concrete with waste gas reduction and self-cleaning. The fundamental phenomena of the Photocatalytic Concrete were observed by the residue water-weight, SEM, flow and surface hardness(Pencil tester). As a result of this study, the Photocatalytic Concrete used Photocatalytic powder, OPC admixture and other materials can obtain its properties, also photocatalytic efficiency. Last of all, we are convinced of the Photocatalytic Concrete possibility and make an effort to develop its properties added a various study.

• Resources Recycling
• /
• v.7 no.2
• /
• pp.39-45
• /
• 1998

We smelted thc pellets made by mixing the distilled carbon from wlISte Lires, LD converter dust and slag with reduction process in the revcrberatory furnace. Thc obtained results are as follows 1) The removal mte of zinc appears above 97% after T reducing the pellets at $1300^{\circ}C$ for Ihr and the zinc content in the residue are 0.1~D.2%. 2) Under the mixing condition of 500 g LD dust. 150-200 g LD slag and 30-50 g distilled carbon of waste lires the removal raho of zinc shows above 95%, while t the 50-60% Fe remains in the residue. 3) After smelting at $1350^{\circ}C$ for 3hrs, the recovery ratio of pig iron reduced from lhe p pellets containing 15-20% LD slag and 4.1-7.2% distilled carbon of waste tires appears in the range of 89.3-92%. 4) Tbe c chemical composition of the recovered pig iron is 1.7%C, O.05%P, 0.05%S and balance Fe. 5) Tbe recovered dust from the d dust collcctor alter finishing the reduction rcaction appears as a crude zinc oxide conLaining 60% zinc.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.25 no.1
• /
• pp.6-22
• /
• 1999

Chitosan oligosaccharide having physiological activity, such as cell proliferation and wound healing, was prepared by NaNO$_2$ oxidation-NaBH$_4$ reduction from natural chitosan. After deamination by NaNO$_2$ oxidation, the reducing-end residue from NaBH$_4$ was converted to alditol unit, and the reduction was checked by MBTH reagent. The resulting chitosan oligosaccharide had a degree of polymeration of 2-6 from HPLC analysis. From moisture absorption test at relative humidity of 43% and 81%, the moisture absorption ability was 63% and 57%. Moisture retention ability at relative humidity of 43%, silica gel emvironment, was 98% and 97% respectively. Cell proliferation was showed In the range of 0.000032~0.01%, wound healing effect was also appeared in the concentration of 2% and 20%. Antioxidative effect ($SC_{50}$/) was 3213 ppm. Chitosan oligosaccharide was compatible with most of ingredients used in cosmetic products.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3387-3390
• /
• 2013

Catalytic gasification of mandarin waste residue was carried out using direct and indirect catalyst-contact methods for the first time. In the indirect method, non-catalytic reaction in a reactor was followed by catalytic upgrading of vapor product in another reactor. Two different catalysts, $Ni/{\gamma}-Al_2O_3$ and $Ni/CeO_2-ZrO_2$, were employed. $CeO_2-ZrO_2$ support was prepared using hydrothermal synthesis in supercritical water. The catalysts were characterized by $H_2$-temperature programmed reduction and Brunauer-Emmett-Teller analyses. Under the condition of equivalent ratio (ER) = 0, the indirect catalyst-contact method led to a higher gas yield than the direct method. Under ER = 0.2, the yield of biogas obtained over $Ni/CeO_2-ZrO_2$ was higher than that obtained over $Ni/{\gamma}-Al_2O_3$. Also, the coke formation of $Ni/CeO_2-ZrO_2$ was lower than that of $Ni/{\gamma}-Al_2O_3$. Such results were attributed to the higher reducibility and better lattice oxygen mobility of $Ni/CeO_2-ZrO_2$, which were advantageous for partial oxidation reaction.

• Nuclear Engineering and Technology
• /
• v.49 no.8
• /
• pp.1711-1716
• /
• 2017

Uranium tetrafluoride ($UF_4$) is the most used nuclear material for producing metallic uranium by reduction with Ca or Mg. Metallic uranium is a raw material for the manufacture of uranium silicide, $U_3Si_2$, which is the most suitable uranium compound for use as nuclear fuel for research reactors. By contrast, ammonium uranyl carbonate is a traditional uranium compound used for manufacturing uranium dioxide $UO_2$ fuel for nuclear power reactors or $U_3O_8-Al$ dispersion fuel for nuclear research reactors. This work describes a procedure for recovering uranium and ammonium fluoride ($NH_4F$) from a liquid residue generated during the production routine of ammonium uranyl carbonate, ending with $UF_4$ as a final product. The residue, consisting of a solution containing high concentrations of ammonium ($NH_4^+$), fluoride ($F^-$), and carbonate ($CO_3^{2-}$), has significant concentrations of uranium as $UO_2^{2+}$. From this residue, the proposed procedure consists of precipitating ammonium peroxide fluorouranate (APOFU) and $NH_4F$, while recovering the major part of uranium. Further, the remaining solution is concentrated by heating, and ammonium bifluoride ($NH_4HF_2$) is precipitated. As a final step, $NH_4HF_2$ is added to $UO_2$, inducing fluoridation and decomposition, resulting in $UF_4$ with adequate properties for metallic uranium manufacture.

• BMB Reports
• /
• v.33 no.1
• /
• pp.49-53
• /
• 2000

PMAP-23 is a 23-residue antimicrobial peptide derived from porcine myloid cells. In order to investigate the effects of two Pro residues at positions 12 and 15 of PMAP-23 on antibiotic activity, two analogues in which Ala was substituted for Pro residue at position 12 or 15 were synthesized. $Pro^{12}{\rightarrow}Ala$ (PMAPl) or $Pro^{15}{\rightarrow}Ala$(PMAP2) substitution in PMAP-23 caused a significant reduction on antitumor and phospholipid vesicle-disrupting activities, but did not cause a significant effect on antibacterial activity. PMAP-23 displayed the type I ${\beta}-turn$ structure with a negative ellipticity at near 205 om in SDS micelle, whereas PMAP1 and PMAP2 had a somewhat ${\alpha}-helical$ propensity in TFE solution, as compared to PMAP-23. These results suggest that two Pro residues of positions 12 and 15 in PMAP-23 play important roles in the formation of ${\beta}-turn$ structure on lipid membrane and its ${\beta}-turn$ structure may be essential for antibiotic activity including phospholipid vesicle-disrupting property.

• Molecules and Cells
• /
• v.23 no.2
• /
• pp.252-257
• /
• 2007

Escherichia coli HslVU is an ATP-dependent protease consisting of two heat shock proteins, the HslU ATPase and HslV peptidase. In the reconstituted enzyme, HslU stimulates the proteolytic activity of HslV by one to two orders of magnitude, while HslV increases the rate of ATP hydrolysis by HslU several-fold. Here we show that HslV alone can efficiently degrade certain unfolded proteins, such as unfolded lactalbumin and lysozyme prepared by complete reduction of disulfide bonds, but not their native forms. Furthermore, HslV alone cleaved a lactalbumin fragment sandwiched by two thioredoxin molecules, indicating that it can hydrolyze the internal peptide bonds of lactalbumin. Surprisingly, ATP inhibited the degradation of unfolded proteins by HslV. This inhibitory effect of ATP was markedly diminished by substitution of the Arg86 residue located in the apical pore of HslV with Gly, suggesting that interaction of ATP with the Arg residue blocks access of unfolded proteins to the proteolytic chamber of HslV. These results suggest that uncomplexed HslV is inactive under normal conditions, but may can degrade unfolded proteins when the ATP level is low, as it is during carbon starvation.

• Journal of Preventive Veterinary Medicine
• /
• v.42 no.4
• /
• pp.171-176
• /
• 2018

A study of the tissue depletion of florfenicol (FFC) administered orally to pigs at a dose of 0.05 kg/ton feed for 7 days was performed. Sixteen healthy cross swine were administered with FFC. Four treated animals were arbitrarily selected to be sacrificed 1, 3 and 5 days after the end of treatment. FFC residue concentrations in muscle, liver, kidney, and fat were determined using high-performance liquid chromatography (HPLC) with ultraviolet photometric detector at 230 nm. The correlation coefficient ($R^2$) of the calibration curve for florfenicol amine (FFCa) was > 0.997 and the limits of detection and quantification were 0.012 and $0.040{\mu}g/mL$, respectively. Recovery rates in swine edible tissues ranged from 79.1 to 93.5%. In the FFC-treated group, FFC residues at 3 days post-treatment were below the maximum residue limits (MRLs) in muscle, kidney and fat, and those at 5 days post-administration were below the MRLs in all edible tissues. These results suggest that the withdrawal period of FFC after the drug treatment might be 5 days, which is a sufficient amount of time for reduction of the FFC residues below the MRLs in all edible tissues.