• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.61-67
• /
• 2010

Thick soft clay deposits which are generally located at the west and south coast of the Korean peninsula have complicated characteristics according to their orientation and formation history. Thus, several geotechnical problems could possibly occur when those soft clay deposits are used as foundations for marine structures. Deep cement mixing (DCM) method is one of the most widely used soft soil improvement method for various marine structures, nowadays. DCM method injects binders such as cement into the soft ground directly and mixes with the in-situ soil to improve the strength and other geotechnical properties sufficiently. However, the natural impacts induced by dynamic motions such as ocean waves, wind, typhoon, and tusnami give significant influences on the stability of marine structures and their underlaying foundations. Thus, the dynamic properties become important design criteria to insure the seismic stability of marine structures. In this study, the dynamic behavior of cemented Busan clay is evaluated. Laboratory unconfined compression test and resonant column test are performed on natural in-situ soil and cement mixed specimens to confirm the strength and strain-dependent dynamic behavior variation induced by cement mixing treatment. Results show that the unconfined compressive strength and shear modulus increase with curing time and cement content increment. Finally, the optimized cement mixing ratio for sufficient dynamic stability is obtained through this study. The results of this study are expected to be widely used to improve the reliability of seismic design for marine structures.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권3호
• /
• pp.18-23
• /
• 2006

The formation degree of sustain (ITO pattern) determines the quality of a PDP (Plasma Display Panel). Thus, in the present study, we attempt to detect 100% of the defects that are larger than $30{\mu}m$. Currently, the inspection method in the PDP manufacturing process is dependent upon the naked eye or a microscope in off-line mode. In this study, a prototype inspection system for PDP ITO patterned glass is developed. The developed system, which is based on a line-scan mechanism, obtains information on the defects and sorts the defects by type automatically. The developed inspection system adopts a multi-vision method using slit-beam formation for minimum inspection time and the detection algorithm is embodied in the detection ability. Characteristic defects such as pin holes, substances, and protrusions are extracted using the blob analysis method. Defects such as open, short, spots and others are distinguished by the line type inspection algorithm. It was experimentally verified that the developed inspection system can detect defects with reliability of up to 95% in about 60 seconds for the 42-inch PDP panel.

• 한국군사과학기술학회지
• /
• 제16권1호
• /
• pp.56-64
• /
• 2013

TICN, a next-generation tactical communication network based on a wireless network, acts as the backbone of the whole network. TICN requires the routing which takes both survivability of passage, reliability, and safety of wireless link into consideration. A tactical network like TICN may maintain the passage for just a short period of time due to topology's frequent changes; In this process all nodes, dependent on batteries for their necessary energy, are restricted by batteries' durability in due course. To overcome this shortcoming, the up-to-date protocols consider only either of diminishing or balancing out energy consumptions. Thus there was a limitation to enhancing both throughput and energy efficiency. The thesis proposes a protocol which regards both throughput and energy efficiency, and enhances node survivability by means of minimizing and balancing energy consumption of the whole network. The protocol brings out an improvement in throughput and makes each node's energy usage more effective.

• 정보처리학회논문지D
• /
• 제13D권2호
• /
• pp.175-182
• /
• 2006

탐지레이더는 저고도로 비행하는 물체를 탐지할 목적으로 국방 분야에서 운용하고 있다. 레이더가 탐지한 원시자료는 즉시 정보화되어 의사 결정체계인 지상전술C4I체계에 입력되고 분석을 거친 후 사용자에게 실시간으로 전파되어야 한다. 그러나 현 수작업 표정작업은 운용자의 능력에 따라 정확성 및 적시성이 미흡한 실정이다. 따라서 이 논문에서는 레이더 자료를 이용하여 실시간 항적을 표시할 수 있도록 체계에 대한 개념연구, 요구사항 분석, 설계를 통하여 항적추적관리시스템을 구현하였다. 적용된 핵심기술은 좌표 체계 전환 알고리즘과 기존 통신장비와의 통신프로토콜 개선, 신호 및 자료처리 프로세스를 설계에 반영하였다. 특히, 레이더 신호의 중복처리 및 융합 알고리즘을 개발하여 상황도상에 표적정보를 도시하는 기술을 구현함으로써, 기존 항적관리전력 운용의 신뢰성, 신속성, 편의성을 향상시킬 수 있었다.

• 한국지반공학회논문집
• /
• 제23권4호
• /
• pp.125-132
• /
• 2007

본 연구에서는 표준압밀, 방사형 일정변형속도 압밀, 로우셀압밀, 복합통수능 및 교란영역시험을 수행하여 연직배수공법의 신뢰성 설계를 위한 파라미터를 산정하였다. 또한 방사형 압밀이론에 대한 민감도 해석, 결정론적 해석 및 확률론적 해석이 수행되었다. 시험 결과를 이용한 방사형 압밀이론의 확률론적 해석 결과와 결정론적 해석 결과를 비교, 분석 하였으며, 그로부터 배수재 배치간격은 확률론적 방법보다 결정론적 방법에서 더 넓게 산정됨을 제시하였다. 이는 결정론적 해석에서는 지반 불확실성을 고려하지 못하였기 때문이다. 두 방법을 이용하여 산정된 배치간격간의 차이는 목표 압밀도에 도달할 수 있는 확률과 수평압밀계수의 변동계수에 영향을 받는 것으로 나타났다.

• 지질공학
• /
• 제3권3호
• /
• pp.215-230
• /
• 1993

암반은 지질학적 속성에 따라 다양한 형태의 구조적 특징을 나타내며, 특히 암반 내부에 발달되어 있는 절리계의 공간적, 역학적 특성은 외부응력 변화에 대한 전체 암반의 거동 및 파괴 강도 등에 중대한 영향을 끼치고 있다. 본 연구에서는 절리가 발달되어 있는 암반의 점소성 거동(viscoplastic behavior)을 연속체적 개념으로 분석할 수 있는 능력을 또한 암반구조물 보강에 일반적으로 사용되는 록볼트의 점소성 거동을 분석할 수 있는 능력을 추가시켜, 록볼트 지보효과가 고려된 절리암반의 점소성 거동에 대한 수치해석 모델을 완성하였다. 절리암반 및 록볼트의 점소성 거동에 대한 연속체 모델의 정확도 및 신뢰도는 예제적 모델분석을 수행하여 입증하였다. 실제적 암반구조물 거동분석에 대한 활용성을 고찰하기 위하여 현재 굴착이 진행되고 있는 지하 원유비축공동의 시간적 거동을 분석하여 현장 계측결과와 비교하였으며, 록볼트 설치비율에 따른 지보효과를 산출하였다.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.92-99
• /
• 2004

The formation degree of sustain (ITO pattern) decides quality of PDP (Plasma Display Panel). For this reason, it makes efforts in searching defects more than 30 un as 100%. Now, the existing inspection is dependent upon naked eye or microscope in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP 170 glass is based on line-scan mechanism. Developed system creates information that detects and sorts kinds of defect automatically. Designed inspection technology adopts multi-vision method by slip-beam formation for the minimum of inspection time and detection algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix that draws up an approach to geometry. A characteristic of defects, as pin hole, substance, protrusion, are extracted from blob analysis method. Defects, as open, short, spots and et al, are distinguished by line type inspection algorithm. In experiment, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.191-195
• /
• 2003

The formation degree of sustain (ITO pattern) decides quality of PDP (plasma display panel). For this reason. it makes efforts in search defects more than 30 ${\mu}{\textrm}{m}$. Now, the existing inspection process is dependent upon naked eye or SEM equipment in off-line PDP manufacturing process. In this study developed prototype inspection system of PDP ITO glass. This system creates information that detects and sorts kind of defect automatically. Design ed inspection technology adopts line-scan method by slip-beam formation for the minimum of inspection time and image processing algorithm is embodied in detection ability of developed system. Designed algorithm had to make good use of kernel matrix which draws up an approach to geometry. A characteristic of area-shaped defects, as pin hole, substance, protrusion et al, are extracted from blob analysis method. Defects, as open, short, spots, et al, are distinguished by line type inspection algorithm. In experiment results, we could have ensured ability of inspection that can be detected with reliability of up to 95% in about 60 seconds

• 한국태양에너지학회 논문집
• /
• 제24권3호
• /
• pp.47-54
• /
• 2004

Photovoltaic energy and wind energy are highly dependent on the season, time and extremely intermittent energy sources. Because of these reasons, in view of the reliability the photovoltaic and the wind power generation system have many problems(energy conversion, energy storage, load control etc.) comparing with conventional power plant. In order to solve these existing problems, hybrid generation system composed of photovoltaic(500W) and wind power system(400W) was suggested. But, hybrid generation system cannot always generate stable output due to the varying weather condition. So, the auxiliary power compensation unit that uses elastic energy of spiral spring was added to hybrid generation system for the present study. It was partly confirmed that hybrid generation system was generated a stable outputs by spiral spring was continuously provided to load.

• 한국항공우주학회지
• /
• 제47권5호
• /
• pp.319-325
• /
• 2019

본 논문의 목적은 항공기에 장착되는 복합재 라미네이트 및 샌드위치구조를 가지는 레이돔에 대한 조류충돌해석을 수행하고 해석결과와 시험결과를 비교 및 분석하기 위함이다. 먼저 SPH(Smoothed Particle Hydrodynamics)법을 통해 물의 특성을 가지는 조류를 모델링하였으며, 조류충돌시험을 통해 조류가 충돌할 때의 속도를 입력하여 조류충돌해석을 수행하였다. 해석결과를 통해 레이돔의 파손 여부를 조사하고 최대 변형량을 시험결과와 비교하였으며 충돌과정에서의 압력변화추이가 기 연구되었던 결과와 일치함을 확인하였고, 이를 통해 수치해석모델의 신뢰성을 확보하였다. 또한 조류모델을 이루는 입자의 밀도가 레이돔의 파손 형상에 영향을 미친다는 사실을 확인하였다.