• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.369-372
• /
• 2009

A numerical analysis of the effect of plasma on flow characteristics in supersonic flow is studied. It is shown that change of direction and velocity magnitude of flow is appeared different in relative direction of plasma and fluid flow. The case of that direction of electrons, which are same with flow direction, the flow is accelerated, and the case of opposition, the flow is decelerated.

• Korean Journal of Microbiology
• /
• v.15 no.2
• /
• pp.63-76
• /
• 1977

Irradiation with high doses of gamma rays induced the reduction of mycelial weight and anaylase activity, and increased relative amylase activity in surface cultures. Biphase in growth curves was shown in aeration-agitation cultures but the behavior of the first phase of growth could be eliminated by replacing the amylasehydrolysed starch substrates, so that enzyme production was shortened ca. 40 hours and relative amylase activity was increased about 3 times higher before onset of autolysis. In the effect of gibberellin on amylase production, the positive stimulation was appeared to only surface culturs of the liquid medium and the negative effect to shake-cultures in a mutant. Trials of various continuous culture were resulted not only the approalch to the value of amylase activity in surface cultures of liquid medium, but also higher productivity than in batch cultures. The culture-degeneration was observed in two-stage continuous culture, but did not appear in continuous elevation culture.

• 유체기계공업학회:학술대회논문집
• /
• 2005.12a
• /
• pp.481-487
• /
• 2005

A turbopump turbine consists of rotational part including a rotor and stationary part including nozzles and exit guide vanes, of which shape and relative position affect turbine performance owing to supersonic flows with prevailing unsteadiness. In this study, numerical 3-D flow calculations of the turbine with the different number of exit guide vanes and different relative position of each component are conducted and the effect of flow passage variations on turbine performance is analyzed.

• Wind and Structures
• /
• v.1 no.3
• /
• pp.271-284
• /
• 1998

This paper uses the numerical simulation to investigate the interference effect of 3-D turbulent flow around two high rise buildings in proximity at the different relative heights, gaps, and wind velocities. The computer program used to carry out the simulation is based on the control volume method and the SIMPLEST algorithm. The ${\kappa}-{\varepsilon}$ model was used to simulate turbulence effects. Since the contracted flow between two adjacent buildings enhances the strength of vortex shedding from the object building, the pressure coefficient on each side wall of the object building is generally increased by the presence of apposed building. The effect is increased as the relative height or the gap between the two buildings decreases. The velocity on the vertical center line between two buildings is about 1.4 to 1.5 times the upstream wind velocity.

• Geotechnical Engineering
• /
• v.13 no.1
• /
• pp.147-158
• /
• 1997

In this study, it is examined that partial drain has an effect of bearing capacities and deformations on intermediate soils. To compare the numerical and experimental results, this study uses CRISP90 which is composed of Modify Cam-Clay Model for calculation and Geotechnical Centrifuge in model test. As the results of analysis, we can classify relative loading rate into three ranges which are drain, undrain and partial drain. Besides it is proved that partial drain range is about 103.

• 전기의세계
• /
• v.26 no.4
• /
• pp.61-67
• /
• 1977

This paper treats the Ultrasonic effects on the break down characteristics of Liquid Dielectric Material 1) Relative Dielectric constant, Es of Liquid Dielectric Material at a constant temperature decreases in proportion to the irradiated time of Ultrasonic radiation and its intensity, and reaches to a certain saturated value. The saturated value varies with the intensity of Ultrasonic radiation. 2) Power factor of Liquid Dielectric Material at a constant temperature increases in proportion tothe irradiated time of Ultrasonic radiation and its intensity, and reaches to a certain saturated value. The saturated value varies with the intensity of Ultrasonic radiation. 3) Relative resistance of Liquid Dielectric Material at a constant temperature decrease with the irradiated time of Ultrasonic radiation, but the effect of its intensity is very irregular. 4) Break-down strength of Liquid Dielectric Material, at a constant temperature decreases with the irradiated time of Ultrasonic radiation and its intensity, and then reaches to a saturated value.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.115-118
• /
• 2008

In this study, PROMETHEE(Preference Ranking Organization METHod for Enrichment Evaluations) which is one of the multi criteria decision making methods is applied to estimate the relative inundation risk of the urban subcatchment. For this purpose, five factors which have an effect on the inundation risk are selected and used to perform PROMETHEE. Those are elevation average, slope average, density of conduit, population and sediment yields per unit area of each subcatchment. Based on them, PROMETHEE is performed and the relative inundation risk for each subcatchment is estimated. Sensitivity anlysis is conducted to evaluate each factor's effect on subcatchment and it is found that suggested method can be used to establish a practical guide to mitigate the inundation.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.1-12
• /
• 2003

This study was performed to provide normative isokinetic strength of knee muscles of middle school non-athletic and athletic populations for rehabilitation and pre-season screening for injury prevention. Seven non-athletic subjects and 8 hockey players participated in this investigation. Each subject was tested at speeds of $60^{\circ}/sec$, $180^{\circ}/sec$, and $300^{\circ}/sec$. The free weight of lower leg was measured at speed of $60^{\circ}/sec$ to take gravity effect Into consideration when peak torque of knee muscles occurred. The results showed that the relative peak torque production of knee flexors did not change but the relative peak torque of knee extensors decreased significantly. Mamstring/quadriceps ratios increased mainly due to significant decreases in knee extensors torque production. No significant differences were found between groups. The hamstring/quadriceps ratios for both groups were significantly lower when the gravity effect was not eliminated.

• Korean Journal of Medicinal Crop Science
• /
• v.21 no.5
• /
• pp.348-352
• /
• 2013

This study was carried out to investigate the effect of sucrose, boric acid, and calcium nitrate in optimum pH and relative humidity on pollen germination and pollen tube growth of boxthorn (Lycium chinense M.). Medium containing 100mg/L of $H_3BO_3$ showed maximum pollen germination and pollen tube elongation, 64.8% and $920{\mu}m$. Additionally supplied calcium nitrate to the medium lowered pollen germination rate and pollen tube elongation. Here we report the optimum conditions for the pollen germination and pollen tube development was observed at 10% sucrose, 1.0% agar, pH 6.0, and 100% relative humidity.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.36 no.2
• /
• pp.39-46
• /
• 2004

In this paper, the effects of roll diameter and storage time in roll form, bending method and relative humidity on curl in copy paper and inkjet coated papers are investigated. In copy paper, more MD curl is showed at smaller roll diameter and the extension of bending time. However CD curl is hardly influenced by roll diameter and bending time. At high relative humidity, especially CD curl largely reduces. All inkjet coated papers without the primary or the secondary back coating during papermaking show the increase in MD curl and slight decrease in CD curl by MD bending regardless of the winding methods(TSO, TSI). The water spray as back coating results in the remarkable reduction of CD curl regardless of the winding methods. Drying on flat dryer after spraying the moisture on back side display the most excellent effect on the reduction of CD curl.