Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Effect of Physical Treatments on Curl in Inkjet Coated Paper During Papermaking

물리적 처리가 잉크젯 코팅지 생산 과정 중에 발생되는 컬에 미치는 영향

  • 임연주 (고려대학교 생명환경대학 환경생태공학) ;
  • 남원석 (삼화제지 기술연구소) ;
  • 백기현 (고려대학교 생명환경대학 환경생태공학부)
  • Published : 2004.06.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, the effects of roll diameter and storage time in roll form, bending method and relative humidity on curl in copy paper and inkjet coated papers are investigated. In copy paper, more MD curl is showed at smaller roll diameter and the extension of bending time. However CD curl is hardly influenced by roll diameter and bending time. At high relative humidity, especially CD curl largely reduces. All inkjet coated papers without the primary or the secondary back coating during papermaking show the increase in MD curl and slight decrease in CD curl by MD bending regardless of the winding methods(TSO, TSI). The water spray as back coating results in the remarkable reduction of CD curl regardless of the winding methods. Drying on flat dryer after spraying the moisture on back side display the most excellent effect on the reduction of CD curl.

Keywords

References

  1. Fapet Oy Paper Physics Book 16 in series of Papermaking Science and Technology Niskanen,K.
  2. Pulp and Paper Mag. Can. v.62 no.1 Drying stresses and curl in paper Glynn,P.;Jones,H.W.H.;Gallay,W.
  3. Tappi J. v.56 no.12 Stability of dimensions and form of paper Gallay,W.
  4. Wiley Interscience v.3 Pulp and Paper Chemistry and Chemical Technology (3rd edition) Casey,J.P.
  5. Tappi J. v.82 no.7 Paper curl prediction and control using neural networks Edwards,P.J.;Murray,A.F.;Papadoopoulos,G.;Wallace,A.R.;Barnard,J.;Smith,G.
  6. Pulp & Paper Canada v.83 no.6 Control of fine paper curl in papermaking Lebel,R.;Stradal,M.
  7. Solutions Solving curl problems Green,C.
  8. J. Korea Tappi. v.24 no.4 LAS surface treatment and decurling Åkesson,R.
  9. Tappi J. v.75 no.5 Curl control with a Coanda actuator system Mann,K.C.;Huff,L.A.
  10. J. Pulp & Paper no.12 Paper curl causes, diagnosis, and control Uesaka,T.
  11. The Manufacturing Process for Engineering Materials (2nd edition) Kalpakjian,S.
  12. MS Thesis, Korea Uni. Effect of pysical treatments on paper curl Lim,Y.J.