• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.6
• /
• pp.215-226
• /
• 2015

This study introduced food waste into re-vegetation base materials for surface loss recovery of carry-away highway cut slope. The object of this study is to derive the mixing ratio of food waste by conducting a test installation, monitoring, analysis and evaluation for recovery of carry-away highway cut slope. The following items were investigated and analyzed each experimental zone to draw mixing ratio of re-vegetation base materials and food waste : the physical and chemical properties of the vegetation base materials, soil-hardness, soil-humidity, left out and the collapsed point, established number of trees, species richness of grass species and tree species, coverage, pest status, and invasion of disturbance species. The re-vegetation method was evaluated by each experiment zone which has different mixing ratio. As a result, experiment zone A was rated 45 points out of 60 rating points as the best re-vegetation method. However, this study result has been derived from one construction and short-term monitoring. In order to derive the suitable and dependable mixing ratio, conducting an objective re-vegetation method evaluation and long-term experiment and monitoring is required.

• Journal of Microbiology and Biotechnology
• /
• v.16 no.10
• /
• pp.1491-1498
• /
• 2006

The feasibility of pullulan acetate nanoparticles (PAN) with ionic strength (IS) sensitivity as a radioisotope carrier to inhibit tumor growth is demonstrated. PAN was radiolabeled with rhenium 188 (Re-188) without any chelating agents. The labeling efficiency of Re-188 into PAN (Re-188PAN) was $49.3{\pm}4.0%$ as determined by TLC. The tumor volumes of mice treated with 0.45 mCi of Re-188-PAN were measured and compared with that of free Re-188 after 5 days of intratumoral injection. For the histological evaluation of apoptotic nuclei of tumor cells, hematoxylin and eosin (H&E), and terminal deoxynucleotidyl transferase biotinylated deoxyuridine triphosphate nick end labeling (TUNEL) staining were performed. The mean tumor volume of the Re-188-PAN-treated group was decreased by 36% after 5 days, whereas that the free Re-188-treated group was decreased by only 15% (P<0.05). The mean number of TUNEL-positive cells in Re-188-PAN-treated tumors at $144.3{\pm}79.9$ cells/section was significantly greater than the control ($26.7{\pm}7.9$ cells/section, P=0.03). The numbers of leukocyte and lymphocyte were decreased in both free Re-188- and Re-188-PAN-treated mice. These results indicated that the intratumoral injection of Re-188-PAN effectively inhibits the tumor growth by prolonging Re-188 retention time in tumor site induced by the IS sensitivity.

• Journal of Periodontal and Implant Science
• /
• v.44 no.4
• /
• pp.201-206
• /
• 2014

Purpose: Aggressive periodontitis, especially in its severe form, was traditionally considered to have an unfavourable prognosis. It required a complex treatment and its stabilization was often achieved by surgical therapy. The aim of this study was to investigate the results of nonsurgical periodontal treatment in severe generalized forms of aggressive periodontitis. Methods: Patients with advanced generalized aggressive periodontitis were included in the study. Probing depth (PD) of pockets ${\geq}7mm$ and clinical attachment level (CAL) of sites with attachment loss ${\geq}5mm$ were measured at baseline before nonsurgical periodontal treatment, at re-evaluation, and after treatment. The following other parameters were recorded: resolution of inflammation and bone fill. We compared the baseline values with re-evaluation and posttreatment values using the Friedman test. The Wilcoxon test with the Bonferroni correction was used for both re-evaluation and posttreatment values. Results: Seven patients with 266 periodontal sites were examined. A significant difference was found between values, reported as medians with interquartile ranges, for PD at baseline (7.94 [7.33-8.19] mm) and both re-evaluation (4.33 [3.63-5.08] mm) and posttreatment (3.54 [3.33-4.11] mm) values (P=0.002). A significant difference was also found between values for CAL at baseline (9.02 [7.5-9.2] mm) and both re-evaluation (6.55 [6.30-6.87] mm) and posttreatment (6.45 [5.70-6.61] mm) (P=0.002). Inflammation was resolved and angular bone defects were repaired in all cases. Conclusions: These therapeutic results suggest that this form of periodontitis could have positive outcomes after nonsurgical periodontal treatment. The reparative potential of tissue affected by severe aggressive periodontitis should encourage clinicians to save apparently hopeless teeth in cases of this form of periodontitis.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.197-198
• /
• 2012

If the mechanical development be applied to the Nuclear Power Plant Structures instead of the standard hook development, the problem of overcrowding re-bars in the anchorage zone can be solved and the construction quality of the concrete work will be improved. But there are some problems in applying it to the NPP structures because of the restriction on the re-bar yield strength and diameter. After the performance evaluation test for the mechanical development, we can develop the new design equation of the mechanical development length in order to solve the limitation and apply it to NPP structures.

• Journal of Korean Society for Quality Management
• /
• v.34 no.2
• /
• pp.33-47
• /
• 2006

This study was designed to examine the casual relationships among trust evaluation factors, trust, customer satisfaction, and re-use intention in the P2P file sharing service. We applied structural equation model to test the hypotheses and research model. As a result of this study, trust evaluation factors affect trust and customer satisfaction and both of trust and customer satisfaction affect re-use intention respectively and significantly. Also trust affects customer satisfaction significantly. Specifically, trust was empirically confirmed as one of the important factors preceding customer satisfaction and re-use intetion in the P2P file sharing service. Therefore, this study shows that trust is important factor that P2P companies have to emphasize to raise user satisfaction and performance.

• The Korean Fashion and Textile Research Journal
• /
• v.13 no.3
• /
• pp.353-363
• /
• 2011

The purpose of this study was to deduce factors organization of brand equity for the exclusive imported brand by Department Store and to analyze it's influence on the performance. Subjects for the quantitative study, quota sampling was adopted in the areas where the subject brands were in place, and 452 questionnaires (141 of hands-on staff, 311 of consumers) were analyzed. The data were analyzed by using factors and reliability analysis, the independent sample t-test, and multiple regression analysis. The results were as follows; 1. The examining the effect of asset evaluation attributes of imported brands(GAP, ZARA) monopolized by certain department stores on business achievement and consumer attitude, it turned out that business achievement in hands-on staff's asset evaluation in view of business entity had meaningful difference according to the contract types of the brand, and that business achievement according to hands-on staff's evaluation and consumer attitude according to consumers' evaluation were different according to the brand asset value. 2. The examining the effect of consumer attitude according to consumers' evaluation, it turned out that preference had meaningful effect on both store preference and intention of re-purchase, while as to ZARA, image had meaningful effect on store preference and intention of re-purchase, and reliability on store preference.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1155-1166
• /
• 2001

The purposes of this research were 1) to identify shopping orientation according to customer's personality type, 2) to examine perceived importance of service and satisfaction of service related to customer's personality type, 3) to find the relationships of evaluation of salesperson's service and re-purchase intention in each of customer's personality types. The data were collected via self-administered questionnaires from 434 female formal wear shoppers. and were analyzed by frequency, factor analysis, ANOVA, Chi-square test, and multiple regression analysis. The results of this study were as follows: Shopping orientations varied according to customer's personality type. E type had stronger Hedonic/self-confidence than I type, F type had higher Depending decision making than T type and P type had higher Quick decision making than J type. And service items satisfied the customers with a certain personality type. E type was satisfied with timely and proper A/S, not forcing to purchase and trustful behavior of salesperson more than I Type was. And also with expertise, individualized care, polite attitude, and merchandising promotion. N type was satisfied with individualized care more than S type was. A service evaluation criterion affected the re-purchase intention for a customer with a certain personality type. Customer's convenience in E. I. S, N, T, F, J types had a significant effect on re-purchase intention. And Expertise/ care in E, N, T, J types had a positive effect on re-purchase intention. also Politeness in E, I, S, N, T, J, P types did. But in only E type, Merchandising promotion affected re-purchase intention.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2018

We aimed to develop a high quality 3.5 ton class swing reducer by studying the efficiency improvement of the reducer through the optimum design and performance evaluation of the assembled, high efficiency, lightweight 3.5 ton swing reducer. Based on the optimal design of the worm and worm wheel, the optimal manufacturing method of the worm wheel, the optimized casing design, and the optimum design of the output pinion, Respectively. Therefore, in this paper, to improve the efficiency of the worm gear reducer system, we will develop the manufacturing technology and verify the mass production by combining the manufacturing process design, processing and assembling technology according to the optimization design. We have conducted research to realize mass production by product verification such as product efficiency, reliability and durability according to optimal design of worm gear reducer.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2001.03a
• /
• pp.347-354
• /
• 2001

In this study, 3-D FEM analysis are carried out to investigate the effect of the corners and re-entrant corners which can't be analysed by 2-D analysis. The excavation shape is re-entrant type conditions. The wall displacement, earth pressure and effectiveness of the corner struts are investigated in the re-entrant case, The 3D analysis are peformed to evaluate the effect of various factors, such as re-entrant corner size, excavation depth, and presence of struts. The wall displacement and earth pressures are influenced the size of re-entrant corner. Therefore, the effect of re-entrant corner should be considered in the evaluation of the earth pressure and displacement of the corners. Finally, strut-support systems are not effective at the re-entrant corner.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.329-330
• /
• 2023

The performance of the construction project is to be evaluated within 60 days of completion, according to relevant laws. It evaluates cost, construction period, design change, re-construction, safety, etc. for each project stage. And the project owners are inputting the evaluation results of the construction work into the construction project information system(CALS). The post-evaluation result information entered in this way can be referred to in the basic design of the construction project by referring to the related contents if there is a similar construction in the future. And It can also be used to predict and respond to the required period and cost by analyzing the accumulated data. In this study, in order to provide reference data that can be used in similar projects in the future, the latest analysis methods are reviewed and the possibility of future application is considered. Accordingly, this study intends to focus on the construction cost part among the indicators such as construction cost, construction period, design change, and re-construction that are currently being dealt with in post evaluation.