• 한국연소학회지
• /
• 제22권3호
• /
• pp.47-52
• /
• 2017

The propellant tile and crack which account for the greatest proportion of solid rockets are profoundly affected by viscosity and mechanical properties of solid propellant. In this paper HTPB/AP/Al system propellant has been researched for the viscosity, mechanical properties and burning properties with type and contents of bonding agents. The viscosity of propellant was changed significantly depending on the type and contents of bonding agents, and mechanical properties of HTPB/AP/Al system propellant were also varied. Considering both lower viscosity and stable mechanical properties, the optimum type and contents of bonding agents can be identified as the main factors to the HTPB/AP/Al system propellant.

• 품질경영학회지
• /
• 제23권1호
• /
• pp.74-94
• /
• 1995

Through the application of Quality Assurance(QA) techniques in R&D activities, we can approach for cost reduction and productivity improvement with high reliability. Application of QA systems in R&D in developed countries were studied, a enquete survey was performed to investigate researcher's understanding of QA in R&D. As a result of this study, it is considered desirable that QA system be applied partially to the feasible work areas at first, and the scope of application be enlarged to extended areas, later. For these aims, various and feasible QA system should be developed and established. As the need for quality assurance in R&D is expected to be increased continuously in the future, it is imperative for us to be prepared for the application of QA system in R&D activities.

• 대한방사선기술학회지:방사선기술과학
• /
• 제41권1호
• /
• pp.39-45
• /
• 2018

The purpose of this study is to evaluate the usefulness of a software-based quality assurance system based on Volumetric Modulated Arc Therapy treatment plan. Evaluate treatment plan through the D VH analysis, PTV mean dose ($D_{mean}$) and PTV 95% dose($D_{95}$) compare the MFX based on original treatment plan, Average error rate was $0.9{\pm}0.6%$, $1.0{\pm}0.8%$, respectively. Measuring point dose using phantom and ion chamber, the average error rate between the ionization chamber and MFX was $0.9{\pm}0.7%$, $1.1{\pm}0.7%$ (high dose region), $1.1{\pm}0.9%$, $1.2{\pm}0.7%$ (low dose region). The average gamma though of MFX and $Delta^{4PT}$ is $98.7{\pm}1.2%$, $98.4{\pm}.3%$, respectively. Through this study, A software based QA system that simplifies hardware based QA procedures that involve a lot of time and effort. It can be used as a simple and useful tool in clinical practice.

• 품질경영학회지
• /
• 제43권3호
• /
• pp.327-340
• /
• 2015

Purpose : Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat uniforms' defects and 40mm ammunition explosion accident. To address these problems, Defense Agency for Technology and Quality(DTaQ) introduced new systems such as Manufacturing Readiness Assessment(MRA), Test Report Information System(TRIS) and so on. However, these activities require the human and time resources which cannot be increased in short period. In this paper, we suggest more practical and efficient product examination method. Methods : The most popular and widely used government's quality assurance technique is a sampling method to examine the product. In this research, we first reviewed the DTaQ's quality assurance regulation, then identified several possible problems and finally suggested more efficient and effective sampling plans. Results : We have suggested new sampling framework and evaluated its performance on two military supplies by comparing with other sampling method, and observed that the number of tested samples can be substantially reduced. Therefore, required quality assurance time can be saved. Conclusion : In this paper, we first reviewed the product examination frameworks of DTaQ, PPQMS and DCMA. Then we identified several possible problems which can cause the loss of objectivity and time. To handle these problems, we suggested the new product examination framework and tested the framework to verify the performance.

• 한국의학물리학회지:의학물리
• /
• 제24권4호
• /
• pp.315-322
• /
• 2013

전문가 그룹의 외부검사를 통하여 의료기관 자체적으로 시행되고 있는 품질관리를 평가하고 구조적 문제점에 대한 상호보완을 하고자 하였다. 외부 검사의 정당성 확보를 위해 전국 80여 개의 의료기관 중 지역 분포를 고려하여 30여 개를 선정하였고, 최종 25개의 의료기관이 자발적 참여의사를 신청하였다. 참여의료기관은 비공개를 원칙으로 하였고, 사전에 상호 비교하여 검증된 측정 장비를 가지고 직접 방문하여 측정하는 것을 원칙으로 하였다. 두 개 이상의 광자선을 대상으로 출력선량을 측정하였고, 갠트리회전 정확도, 콜리메이터 회전 정확도, 다엽콜리메이터 이동 위치 정확도 등을 측정하였다. 출력선량 측정에서 6 MV의 경우 -0.8%~4.5%까지 절대오차를 보였고, 10 MV의 경우 -0.79%~3.01%이었고, 15 MV에서 -0.7%~0.07% 절대오차를 나타내었다. 25개 의료 기관을 대상으로 한 50개의 광자선 중에서 절대 흡수선량이 2% 이상 되는 에너지가 8개(16%)로 나타났다. 조사면과 갠트리, 콜리메이터 회전축 일치도는 2개 의료기관을 제외하고 모두 ${\pm}2$ mm 이내의 결과를 보였다. 다엽콜리메이터 이동 위치 정확도는 모두 ${\pm}1$ mm 이내의 정확도를 보였다. 에너지 선질 조사에서 광자선 6 MV의 경우 KQ 값의 최고값과 최저값의 차이는 0.4%로 나타났다. 물 흡수선량 기반 측정 기준서 사용기관은 21개(84%), 공기 흡수선량 기반 측정 기준서 사용기관은 4개(16%)로 조사되었고, SSD 측정법을 사용하는 기관은 22개, SAD 측정법을 사용하는 기관은 3개 기관으로 조사되었다. 외부검사는 자체적으로 시행되고 있는 품질관리의 구조적인 문제점을 찾아 상호 보완하는 것임으로 매우 중요하다. 따라서 전문가 그룹 및 국가가 함께 주기적이고, 지속적인 외부검사가 시행 될 수 있도록 국제 수준의 전문가의 양성 및 국가지원 제도가 필요하다고 사료된다.

• 품질경영학회지
• /
• 제25권1호
• /
• pp.142-155
• /
• 1997

To successfully carry out large scale research projects while su, pp.rting quality assurance of research output, effective and systematic management through utilization of resources such as manpower, time and cost as well as engineering techniques such as component technology and design methodology is required. It is necessary to establish development methodology to su, pp.rt quality assurance. The development methodology covers the contents and procedures of the project, such as division of the project into independently executable units, allocation of resources including researchers, component technology, related know-how and equipment, deployment of research units and integration of the project at the end. In this paper we present systematic development methodology for quality assurance in large scale software development projects by analyzing the contents of the methodology a, pp.ied to the Gigabit Information-processing And Networking Technology development project(GIALT).

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.1669-1679
• /
• 2010

Related to the on-going "Train Control System Project of Pilot Line Construction for Urban MAGLEV Train", activities by each phase shall be conducted to achieve SIL4 level and obtain safety certification from the Independent Safety Assessment(ISA), based on the IEC standards((IEC 62278/62279 and IEC 62425) for the first time in Korea. This thesis describes the introduction of IEC standards, system assurance activities (such as plan, analysis, test, verification and validation) in compliance with requirements management and project life-cycle and relations with the safety assessment activities; and certification activities (such as document reviews and audits) through system RAMS activities, software quality assurance activities and safety assessment, for the purpose of achieving a successful safety certification at the time of completing the project as system assurance activities including software and safety certification activities in order to acquire the safety certification for train control system which does not exist at all in domestic cases. It is believed that overall system safety assurance activities in this project will contribute to develop more upgraded products of the domestic train control system on the quality and safety point of view, find overseas markets and establish a bridgehead in the future.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.648-654
• /
• 2018

군수품의 품질보증을 담당하는 국방기술품질원에서는 크게 4가지 형태로 군수품을 구분하여 품질보증 활동을 수행하고 있다. 이러한 군수품에 대한 품질보증형태 분류는 품질보증기관의 입장에서만 결정되었기에 다른 이해관계자라 할 수 있는 방위사업청, 제조업체 및 수요군에서 요구되는 분류 기준과 상이할 수 있다. 이에 본 논문에서는 군수품에 대한 효율적인 조달 및 생산, 품질보증을 위한 적정 군수품 품질보증 형태 분류 기준을 제시하고자 하였다. 이를 위해 군수품에 대한 정부 품질보증기관인 기품원 뿐만 아니라 정부 조달물자의 품질확인을 담당하는 한국조달연구원의 품목 분류제도에 대해 살펴보았다. 또한 방사청 등 계약 및 제조, 품질보증, 수요군 등 모든 관련기관 입장에서의 적절한 군수품 분류기준을 정의하고 분석하였으며, 현 기준에 따른 군수품 분류 데이터 현황을 파악하였다. 아울러 제시된 품질보증형태 분류 기준을 활용한 적용사례 역시 제시하였다. 끝으로 본 연구에서 제시된 품질보증 형태 분류 기준을 적용한 차등화된 정부 품질보증 활동을 통해 업무 효율성 개선을 통한 군수품 품질향상에 기여할 것으로 판단된다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.596-601
• /
• 2013

In the current pavement construction practice, the state agencies traditionally determine the quality of the as-constructed pavement mix based on individual mixture material parameters (e.g., air voids, cement or asphalt content, aggregate gradation, etc.) and consider these parameters as key variables to influence payment schedule to the contractors and the present and future quality of the as-constructed mixture. A set of empirically pre-determined pay adjustment schedule for each parameter that was differently developed and being used by the individual agencies is then applied to a given project, in order to judge whether each parameter conforms to the designated specifications and consequently the contractor may either be rewarded or penalized in accordance with the payment schedule. With an improved quality assurance system, the Performance Related Specification, the individual parameters are not utilized as a direct judgment factor; rather, they become independent variables within a performance prediction function which is directly used to predict the performance. The quantified performance based on the prediction model is then applied to evaluate the pavement quality. This paper presents the brief history of the quality assurance in asphalt pavement construction including the Performance Related Specifications, statistical performance models in terms of fatigue and rutting distresses, as an example of the performance prediction models, and envisions the possibilities as to how this Performance Related Specification could be utilized in other infrastructures construction quality assurance.

• International Journal of Computer Science & Network Security
• /
• 제23권11호
• /
• pp.142-148
• /
• 2023

The National Agency for Quality Assurance in Higher Education plays a crucial role in education in Ukraine, as an independent entity creates and ensures quality standards of higher education, which allow to properly implement the educational policy of the state, develop the economy and society as a whole.The purpose of the article: to reveal the crucial role of the National Agency for Quality Assurance in Higher Education to create quality management of higher education institutions, to show its mechanism as an independent entity that creates and ensures quality standards of higher education. and society as a whole. The mission of the National Agency for Quality Assurance in Higher Education is to become a catalyst for positive changes in higher education and the formation of a culture of its quality. The strategic goals of the National Agency are implemented in three main areas: the quality of educational services, recognition of the quality of scientific results, ensuring the systemic impact of the National Agency. The National Agency for Quality Assurance in Higher Education exercises various powers, which can be divided into: regulatory, analytical, accreditation, control, communication.The effectiveness of the work of the National Agency for Quality Assurance in Higher Education for 2020 has been proved. The results of a survey conducted by 183 higher education institutions of Ukraine conducted by the National Agency for Quality Assurance in Higher Education are shown. Emphasis was placed on the development of "Recommendations of the National Agency for Quality Assurance in Higher Education regarding the introduction of an internal quality assurance system." The international activity and international recognition of the National Agency for Quality Assurance in Higher Education are shown.