Journal of Korean Society for Quality Management (품질경영학회지)

Korean Society for Quality Management (한국품질경영학회)
권호 표지
DOI QR코드

DOI QR Code

Suggestion for Enhancement of Product Examination Government Quality Assurance Activity

군수품 제품확인감사 기준정립을 위한 제언

  • Ahn, NamSu (Department of Industrial Management, Ulsan College)
  • 안남수 (울산과학대학교 산업경영과)
  • Received : 2015.04.28
  • Accepted : 2015.07.28
  • Published : 2015.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Purpose : Recently, many quality issues are aroused in military forces, such as failures in K-series weapons, combat uniforms' defects and 40mm ammunition explosion accident. To address these problems, Defense Agency for Technology and Quality(DTaQ) introduced new systems such as Manufacturing Readiness Assessment(MRA), Test Report Information System(TRIS) and so on. However, these activities require the human and time resources which cannot be increased in short period. In this paper, we suggest more practical and efficient product examination method. Methods : The most popular and widely used government's quality assurance technique is a sampling method to examine the product. In this research, we first reviewed the DTaQ's quality assurance regulation, then identified several possible problems and finally suggested more efficient and effective sampling plans. Results : We have suggested new sampling framework and evaluated its performance on two military supplies by comparing with other sampling method, and observed that the number of tested samples can be substantially reduced. Therefore, required quality assurance time can be saved. Conclusion : In this paper, we first reviewed the product examination frameworks of DTaQ, PPQMS and DCMA. Then we identified several possible problems which can cause the loss of objectivity and time. To handle these problems, we suggested the new product examination framework and tested the framework to verify the performance.

Keywords

References

  1. American Society for Quality(ASQ). 2008. ANSI/ASQ Z1.4. Sampling Procedures and Tables for Inspection by Attributes.
  2. American Society for Quality(ASQ). 2008. ANSI/ASQ Z1.9. Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming.
  3. Department of Defense(DoD). 1989. MIL-STD-105E. Sampling Procedures and Tables for Inspection by Attributes.
  4. Department of Defense(DoD). 1968. MIL-STD-414. Sampling Procedures and Tables for Inspection by Variables for Percent Nonconforming.
  5. Department of Defense(DoD). 1996. MIL-STD-1916. DoD Preferred Methods for Acceptance of Product.
  6. Ministry of Defense. 2015. Defense Acquisition Program Act and its Implementing Ordinances.
  7. Defense Acquisition Program Administration(DAPA-1). 2014. Manufacturing Readiness Assessment Ordinance - Regulation 218.
  8. Defense Acquisition Program Administration(DAPA-2). 2014. Military Supplies Standardization Ordinance - Regulation 247.
  9. Defense Acquisition Program Administration(DAPA-3). Defense Electronic Procurement. Accessed April 20, 2015. http://www.d2b.go.kr.
  10. Defense Acquisition Program Administration(DAPA-4). 2014. DAPA established rule 248.
  11. Defense Acquisition Program Administration(DAPA-5). 2015. 105mm Ammunition Bucket Basic Requirement.
  12. Defense Acquisition Program Administration(DAPA-6). 2015. Bulgogi Patty-Type 2, 8905-7025.
  13. Defense Agency for Technology and Quality(DTaQ). 2015. Defense Quality Operation Regulation. Accessed Aprei 2, 2015. http://www.dtaq.re.kr.
  14. Defense Agency for Technology and Quality(DTaQ-1). Test Report and Information Service. Accessed April 20. 2015. https://etd.dtaq.re.kr/etd/indexAgency.jsp.
  15. Defense Agency for Technology and Quality(DTaQ-2). Introduction to DTaQ. Accessed April 20. 2015. http://www.dtaq.re.kr.
  16. Defense Contract Management Agency(DCMA). 2013. Product Examination DCMA-INST 324.
  17. Defense Contract Management Agency(DCMA). Introduction to DCMA. Accessed April 20. 2015. http://www.dcma.mil.
  18. DongA daily Press. 2014. Corruptions in Tongyoung-ham and Military Inner Community.
  19. Lim, Jae Geun, Cho, Byung Sun, and Jung, Soo Il. 2004. "A Study on KS A ISO 2859-2 and 2859-3 for the Best Companies in Safety management." Journal of the Korea Safety Management and Science 6(4):83-97.
  20. Korea Agency for Technology and Standards(KATS-1). 2014. KS Q ISO 2859-1 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit(AQL).
  21. Korea Agency for Technology and Standards(KATS-2). 2014. KS A ISO 3951 Sampling procedures for inspection by variables.
  22. Kookbang Daily Press. 2015. Creative Defense Through Paradigm Change.
  23. Procurement Quality Management Service(PQMS). Introduction to PQMS. Accessed April 20. 2015. http://www.pps.go.kr.
  24. Public Procurement Service(PPS). 2013. Public Procurement Inspection & Physics and Chemistry operation guideline - Instruction 1594.
  25. Lee, Seung Hoon. 2012. "A Statistical Software for the Acceptance Sampling Procedures Based upon the New Korea Standards(KS)." Journal of the Korea Management Engineers Society 17(2):149-171.
  26. Hong, Sung Hoon, and Lee, Seung Hwan. 1995. "ISO 3951, Sampling Procedures and Charts for Inspection by Variables for Percent Nonconforming." Journal of the Korean Society for Quality Management 23(1):1-14.
  27. Hong, Sung Hoon, and Lee, Seung Hwan. 1996. "ISO 2859-1 (1989), Sampling procedures for inspection by attributes." Journal of the Korean Society for Quality Management 4(3):77-93.
  28. Choi, Sung Woon. 2006. "Implementation of Quality and Reliability Sampling Inspection.." Journal of the Korea Safety Management and Science 8(56):243-251.
  29. The Board of Audit and Inspection(BAI). 2015. 2015-1 Audit and Inspection Result. http://www.alio.go.kr.
  30. Yonhap News. 2014. Forgeries Test Reports in Military Supplies(Detected 2,749 Cases).