• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.12 no.3
• /
• pp.191-200
• /
• 1979

For the use of antarctic krill as a fond protein source its compositional characteristics were investigated as the first part of the work includes other subjects such as processing of drill paste, concentrates, and fermented or seasoned product. In general composition of fresh frozen and preboiled frozen krill on board, the contents of crude fat and free amino nitrogen were higher in the former than in the latter which contained a high amount of ash. VBN was rather high as much as 37.6 and $26.4\;mg\%$ in both fresh frozen and preboiled krill. The pH of drill homogenates was 7.1 to 7.2 in both cases. Such a low pH might be attributed to a long term storage and temperature fluctuations during frequent transshipping. The amino acid competition of fresh frozen krill meat showed relatively high amount of glutamic acid, aspartic acid, lysine, proline, and leucine while methionine, histidine, serine, tyrosine, and phenylalanine were lower. Among the essential amino acids lysine and leucine were higher and methionine was lower. In tile composition of free amino acid proline, lysing, arginine, and alanine were higher comparatively to the contents of histidine, aspartic acid, serine, and threonine. It is noteworthy for nutritional qualification that tile essential amino acids particularly as lysine were abundant similarly to that of fishes. Heavy metal contents of krill meat 0.039 to 0.048 ppm as Hg, 0.06 to 0.11 ppm as Pb, less than 0.32 ppm as Zn, 0.008 to 0.012 ppm as Cd, 0.61 to 0.68 ppm as Fe, 0.87 to 1.37 ppm as Cu, and nondetective as Cr. A high Cu content seems to be resulted by tile blood pigment of crustacea. The ratio,1 of edible portion to non-edible portion were 37:63 in fresh frozen and 42:58 in preboiled frozen krill respectively. Release of drip after thawing was more in fresh frozen than in preboiled frozen drill marking $36\%$ and $24\%$ of both respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.3
• /
• pp.164-171
• /
• 2005

The aim of this study was to evaluate the load of nutrient from paddy fields. Water management practices that can reduce eutrophication and meet water quality requirements will also be addressed. Continuous monitoring from May to September in 2002 and 2003 was conducted for water quantification and qualification at the intensive paddy fields in Icheon, Gyunggi province of Korea. Water balance and concentration variation of nitrogen and phosphorus in the water were independently compared for water quality assessment at each rice cultivation period. Rice land preparation and transplanting periods usually marked the highest water demand when compared to other periods of cultivation. Overall, a greater net irrigation ratio was observed during the transplanting period in 2002 (92.3%) and 2003 (87.2%). The measured total N loads of precipitation, irrigation, drainage, and percolation during the rice cultivation period were 9.9, 41.6, 22.1, and $5.5kg\;ha^{-1}$ for 2002 and 15.8, 55.4, 17.3, and $7.5kg\;ha^{-1}$ for 2003, respectively. The measured total P loads of precipitation, irrigation, drainage, and percolation during the rice cultivation period were 2.1, 13.0, 3.6, and $1.8kg\;ha^{-1}$ for 2002 and 1.6, 15.0, 5.0, and $1.2kg\;ha^{-1}$ for 2003, respectively. Daily nutrient load followed the pattern of surface drainage water, but this pattern was changed by rainfall events. The nutrient load in drainage water depends on rainfall and surface drainage water amount from the paddy fields. Interestingly, the load of total N and total P output was smaller than the input load due to the natural infiltration that Occurred during the rice cultivation period. It is concluded that the paddy fields have a beneficial effect on the ecosystem and can reduce eutrophication in the water.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.10
• /
• pp.871-882
• /
• 2018

This study investigated meaning of life as mediator of the relationships of meaning of work and happiness in Koran middle aged. A sample of 171 middle aged were participated. in survey about meaning of work, meaning of work and happiness. The data were analyzed using correlation test and path analysis. The results was followed. First, every factors was positively correlated. The meaning of work was positively correlated with meaning in life and happiness. And meaning in life was also positively correlated with happiness. Second, the meaning in life had partial mediation effect between meaning of work and happiness. The middle aged's higher score of meaning of work not only directly increased happiness, but also induced higher level of meaning in life, which, in turn, increased happiness. The results of this study suggested that meaning of work is a predictor meaning in life and happness, and meaning in life can be important factor of the relationship between meaning of work and happiness.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.299-305
• /
• 2019

This study was initiated to solve the difficulties of aged and female workers in agriculture society due to aging and demise of young people. In the case of the conventional elevated lift, the risk of exposure to uneven road or work environment, not the difficulty of professional qualification and operation, and the risk of exposure to the uneven road or working environment, were also studied based on previous researches so that women could easily and efficiently perform productive agriculture. First, the simulation was carried out through the prediction model of traction performance using the object of agricultural forklift, and the soil of the Kimhae city in Gyeongnam (34.125kPa, internal friction angle 35.294deg, external friction angle 13.620deg, Adhesion force 5.750 kPa, average cone index 0-15 cm cl, 1001.8 kPa). In the case of the forklift for simulation, the driving force and the kinetic resistance prediction modeling of the agricultural electric forklift are modeled. Based on this model, the motor control drive adopts the 1232E model, which is a drive dedicated to AC motor, and divides the two drivers into master and slave And the model for the simulation was designed to control motor drive, hydraulic drive, and various outputs on the main PCB. The simulation model is undergoing continuous simulation, modification and supplementation. Based on this research, we will continue research for development of safer and more efficient agricultural electric forklift.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.89-96
• /
• 2018

This study analyzed status and demand of participation in lifelong education for 218 residents of low-income class according to National Basic Livelihood Security Act. The results of the study are as follows. First, among the statuses of participation in lifelong education, the abilities to study of the low-income class were reviewed. They showed 95.3% of foreign language ability, 66.1% of ICT utilization capacity and 75.7% of computer literacy ability. And the lifelong education participation rate of low-income people was 75.7% It was considered as passive participation in education. Voluntary participation was identified and analyzed. The the actual participation rate in lifelong education was very low at 22.9%. Social participation and awareness according to participation in lifelong education was 43.3% higher than that of respondents who had no participation experience. Especially, voluntary participants showed 73.3% higher than those who did not participate. Second, as a result of analyzing lifelong education of low income class, 74.8% of the respondents answered that there is wished education program. And 50.0% of them could not participate because they did not have enough time. The programs that they wanted to participate in were the programs that could help their real lives such as home life, health and medical courses, professional qualification obtaining process, etc. This indicates that the income level plays a significant role in participation in lifelong education. As a result of analyzing the results of this study above, Korean lifelong education is emphasized and the participation rate is increasing rapidly. However, participation of low-income class in lifelong education seems low.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.2
• /
• pp.5-15
• /
• 2009

Purpose : This study was to examine the secondary traumatic stress(STS) and related factors of emergency medical technicians. Methods : This study was conducted among 190 emergency medical technicians, over the age of 25, with the 1st or 2nd grade qualification, who serve at fire stations in U and P city of Korea. The collected data for this study was analyzed using SPSS 12.0. Result : The average character type of A-type personality technicians was 43.25 points and the average of B-type personality technicians was 37.82 points. It suggested that the former was higher than the latter. State anxiety did not show statistically significant difference between A-Type group and B-Type group with the score of 48.51 for A-Type and 47.91 for B-Type. Physical symptoms showed statistically significant difference between the two groups with the higher score of 28.45 for A-type group than that of 28.13 for B-Type group. The level of STS related to the volunteers' job characteristics was found to be low when the volunteers were satisfied with their job and didn't want to transfer to another division. Those on duty who had slept more than seven hours that day had the highest points. The number of points was highest when the frequency for the onset of trauma was between 20~30 times. Furthermore it was found that for most technicians, 71.05%, the period of symptoms lasted for a few weeks at most, and this was where the STS was the lowest, whereas on the other hand the highest STS occurred when the symptoms lasted for a period of up to six months. The findings showed significant correlations with a relation of r=.24 between STS and level of anxiety and r=.45 between STS and physical symptoms. However, no significant correlation was found between the level of anxiety and physical symptoms. Conclusion : The more emergency medical technicians are exposed to accidents, the more serious the STS are. Those with an A-type personality are especially prone to have higher STS. The higher the STS level is, the higher the level of physical states and anxiety is.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.871-878
• /
• 2017

The quality control personnel of the construction work shall establish and execute the quality control plan or the quality test plan and check the qualification of the used materials according to the process, the management of the test and inspection equipment, the quality education, the own quality inspection and measures. Management and quality test of Korea and plays an important role in preventing accidents. However, related organizations did not explicitly disclose their roles in quality testing and quality control tasks while changing the names of quality control personnel to test personnel and quality managers when revising related laws and regulations and the application of labor costs. Therefore, a research of this is needed to improve conflicting situation. In this study, the ambiguous title relation to the quality control persons is improved to meet the requirements of the construction work based on related laws and regulations, and each role and title is classified as 'quality tester' and 'quality manager'. In other words, the person who carries out the quality test of the "Construction Quality Test Standard" specified in the Guideline for Quality Management of Construction Projects shall be the "Quality Tester" and the person who performs the quality control plan establishment and execution work specified in the Enforcement Rule of the Construction Technology Promotion Act shall be referred to as the 'Quality Manager'.

• The Bulletin of The Korean Astronomical Society
• /
• v.35 no.1
• /
• pp.40.1-40.1
• /
• 2010

The Main payload of the STSAT-3 (Korea Science & Technology Satellite-3), MIRIS (Multipurpose Infra-Red Imaging System) has been developed for last 3 years by KASI, and its Flight Model (FM) is now being developed as the final stage. All optical lenses and the opto-mechanical components of the FM have been completely fabricated with slight modifications that have been made to some components based on the Engineering Qualification Model (EQM) performances. The components of the telescope have been assembled and the test results show its optical performances are acceptable for required specifications in visual wavelength (@633 nm) at room temperature. The ensuing focal plane integration and focus test will be made soon using the vacuum chamber. The MIRIS mechanical structure of the EQM has been modified to develop FM according to the performance and environment test results. The filter-wheel module in the cryostat was newly designed with Finite Element Analysis (FEM) in order to compensate for the vibration stress in the launching conditions. Surface finishing of all components were also modified to implement the thermal model for the passive cooling technique. The FM electronics design has been completed for final fabrication process. Some minor modifications of the electronics boards were made based on EQM test performances. The ground calibration tests of MIRIS FM will be made with the science grade Teledyne PICNIC IR-array.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.71-78
• /
• 2021

Since most functions of modern aircraft are controlled by software, software errors are directly related to aircraft safety. The criterion in Chapter 15 of the MIL-HDBK-516C addresses safe development and verification of military aircraft software. As the U.S. Air Force repeatedly experienced non-compliance with Chapter 15 criterion of the MIL-HDBK-516C, it published an Airworthiness Circular (AC-17-01) as a guide to meeting the criterion. In this paper, Chapter 15 of MIL-HDBK-516C, AC-17-01 and the SW Qualification Guideline (DO-178C) as applied by the Federal Aviation Administration are compared and analyzed. For the analysis, a matching ratio formula between the MIL-HDBK-516C criteria specified in AC-17-01 and the DO-178C specified in MIL-HDBK-516C criteria is defined. The sections that satisfy MIL-HDBK-516C criterion are derived when AC-17-01 or DO-178C matches. Based on the analysis results, the aircraft software development process is established and examples of application of Chapter 15 of MIL-HDBK-516C are addressed.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.197-210
• /
• 2006

This study explored several agenda related to license system, education, professional work of radiological technologists(RTs) and a transition process of law for them to investigate a developmental strategy of RTs as a professional career. The results are as followings : 1. The national license system for RTs was started from 1965, 1965-1972 x-ray technicians(medical assistance), 1973-present(2006) radiotechnologist(medical technologist) since then. 2. The average pass ratio of national license examination(1965-2006) for RTs was 46.6%. The method, subjects and level of the examination should be improved. 3. The education term for RTs has been changed since 1963 ; 1963-1990 two year college, 1991-1999 three year college, 2000-2006 four year and three year college depending on universities and colleges. As of 2006, there are twelve 4-year universities and eighteen 3-year colleges. The total number of new students were 1,956. 4. The new developmental paradigm should be made for technology education of RTs corresponding to the development of medicine and science. 5. The qualification system of clinical specialists in radio-technology field needs to be operated not by the non-governmental body(The Korean Radiological Technologists Association) but by the governmental body. 6. The vertical relationship among RTs, doctors and other medical workers should be rebuilt through the revision of law. Especially, doctors and dentists 'guidance authority' for RTs should be changed to 'request authority'. 7. The service extent of RTs should be extended in medical fields corresponding to professional work of RTs and a revision of the law needed for this situation.