• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.6
• /
• pp.8-15
• /
• 2013

Wide range frequency pulses occur in a car crash test. Until now, low frequency under 400Hz has been used to determine an airbag deployment criteria. Also, FIS (Front Impact Sensor) has been used to detect the crash pulse in early stage. Nowadays, technology to determine an airbag delpoyment criteria by using a high frequency crash pulse without FIS is being focused on. In this paper, the signal transmissibility of high frequency pulse for two different cars was studied. Also, signal transfer test of high frequency pulse was done by using a high speed ball impact. Signal runtime of the frontal impact is compared with that of the side impact. The signal transmissibility difference due to the car structure difference was discussed and structure change for improving the signal transmissibility was proposed.

• Journal of Welding and Joining
• /
• v.6 no.1
• /
• pp.21-27
• /
• 1988

This paper describes weldability of dissimilar metal plates with YAG laser for the use of a small-size electronic spring parts. Effects of welding conditions, combination of plates, thickness of upper plate are examined in relation to welding strength and microstructure of welded region. The obtained results are summarized as follows. Welding defects such as cavity and crack showed a tendency to easily occur in the case where 1) pulse duration is short, 2) laser power is high, 3) PBS plate with high thermal diffusivity is used for lower plate. Among these defects, the occurrence of cavity cased a drop of welding strength. This results from the reduction of welding area between upper and lower plates. In SK-5/SUS304 plates (thickness: 0.2/0.4mm/, welding strength was the highest in welding conditions: laser power is 30J/pulse, pulse duration 9ms, amount of defocus +2mm.

• Journal of the Korean Ceramic Society
• /
• v.33 no.8
• /
• pp.935-941
• /
• 1996

Two-dimensional carbon/carbon preforms made of PAN-based carbon yarn and phenolic resin were densified with pyrolysis of propane by pulse chemical vapor infiltration where repeated the cycle of gas introduction residence and evacuation. Maximim density increment was 14% when infiltration temperature and time were 100$0^{\circ}C$ and 21.25 hrs respectively. The distribution of deposits of pyrocarbon by this process has been occurred uniformly in the bottom middle and top of carbon/carbon composite preform Pulse CVI with residence is most effective in increasing density and shortening infiltration time among isothermal CVI and pulse CVI with and without residence.

• Electrical & Electronic Materials
• /
• v.10 no.3
• /
• pp.247-254
• /
• 1997

Internal voids in insulators give rise to partial discharge, which causes a local breakdown and even entire insulation breakdown. Recently, the necessity of establishing the way to diagnose the aging of insulation materials and to predict of insulation breakdown become important. The purpose of our work are to investigate the treeing phenomena with an artificial needle shaped void by the charge of discharge and acoustic emission pulse in each phase angle area at the same time. We analyzed the .PHI.-QA-t pattern and .PHI.-AEA-t pattern using statistic operators such as pulse magnitude, pulse number, skewness, kurtosis. Therefore, the relation between the charge of discharge and acoustic emission pulse will be helpful to predict the breakdown just before the breakdown occur.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.139-144
• /
• 2006

일반적인 PDP 에 적용된 ADS 방식에서 Reset 파형은 ON/OFF Cell 을 초기화 시켜주고 Wall charge를 쌓아줌으로써 낮은 Address 전압으로도 구동을 가능하게 해준다. 기존의 Reset 파형은 Positive ramp pulse를 이용하여 구현하고 있으나 본 논문은 Negative ramp pulse가 적용된 새로운 Reset 파형을 제안하고자 한다. 2-Dimensional fluid simulation code를 이용하여 Ramp부분에 초점을 맞춰 Reset파형을 분석했으며 제안된 Negative ramp reset 파형은 기존의 Positive ramp reset 파형보다 70V가 낮은 전압에서 방전이 발생되는 것을 확인했다. Negative ramp pulse를 적용됐을 경우, Positive ion들이 모두 Negative ramp pulse가 인가된 Scan전극으로 모이는 현상 때문에 기존 Reset파형에 의한 방전일 때보다 낮은 전압에서의 초기방전을 발생시키므로 Reset에 소요되는 시간과 전압을 감소시킬 수 있다.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.40-44
• /
• 2006

In this paper, the distortion characteristics of an electrical pulse which has a rise/fall time due to the dispersion and the reflection, on nonuniform tapered microstrip lines has investigated in time domain. The transmission characteristics on uniform microstrip lines in time domain had represented already, but the results for the nonuniform tapered microstrip lines not represented yet. We investigated the transmission characteristics for pulse signal on the nonuniform tapered microstrip lines, and the result applied to design of wide band impedance matching circuit in design of MMIC. The voltage and current transfer functions are shown for the tapered line. The dispersion and distortion obtained by using these transfer functions are represented for the nonideal square pulse.

• The KIPS Transactions:PartB
• /
• v.15B no.3
• /
• pp.237-244
• /
• 2008

In this paper, an infra-structure using the ontology based on the pulse information is proposed for the context-aware service of medical information system in ubiquitous computing environment. An diagnosis service inference system that represents the pulse data which was generated by the pulse-diagnosis with wearable signal, temperature, humidity, time, and other factors as ontology with artificial intelligence methods and describes the service scenario based on the ontology is designed and implemented.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.51-54
• /
• 2019

The electrodeposition of rhodium (Rh) on silicon substrate at different current conditions were investigated. The cracks were found at high current density during the direct current (DC) plating. The pulse current (PC) plating were applied to avoid the formation of cracks on the deposits. Off time in the pulse plating relieved the residual stress of the Rh deposits and consequently the current conditions for the crack-free Rh deposits were obtained. Optimum pulse current (PC) condition is 5:5 (on:off) for the crack-free Rh electroplating.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.516-524
• /
• 1997

The propagation properties of various pulse signal types(square pulse, Gaussian pulse, trapezoid pulse, RF pulse) on coupled microstrip lines are investigated. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. Frequency-dependent characteristics of coupled microstrip line is obtained using Jansen's approximate equation. The propagation properties of pulse signal on coupled microstrip lines is analyzed regarding to its geometric structure (relative permittivity ${varepsilon}_r$ substrate height h, strip width w of the microstrip line) and pulse width ${\tau}$ of signal pulse. The simulation results show that space between two lines is very significant parameter in pulse distortion in comparison of any other parameters. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.3
• /
• pp.93-98
• /
• 2003

With the improvement of digital signal processors, digital pulse compressor(DPC) is widely used in radar systems. The DPC can be implemented by using FIR filter algorithm in time domain or FFT algorithm in frequency domain. This paper designs an expansible DPC using multiple DSPs. With ADSP-21060 of Analog Devices Inc., the computation time as a function of the number of received range cells and FIR filter tap is compared and analyzed in time domain using C-language and assembly language. therefore, when radar system parameters are determined, the number of DSP's required to implement DPC can be easily estimated.