• 한국건설관리학회논문집
• /
• 제11권2호
• /
• pp.25-34
• /
• 2010

최근 건설 프로젝트는 규모의 대형화, 공정의 복잡함 등에 의한 리스크 인자의 발생이 증가하고 있다. 이로 인해 건설관리에서 리스크 관리의 중요성은 더욱 부각되고 있는 현실이다. 리스크 관리는 확인, 분석, 대응의 과정을 통해서 이루어지며, 분석과정에서 위험인자들의 중요도 및 우선순위를 객관적이고 정확하게 분석해내는 것이 리스크 관리의 성공여부를 좌우한다. 본 연구는 기존연구에서 건설 프로젝트의 공정 리스크 중요도 및 우선순위를 산출하는데 사용된 AHP 기법의 문제점을 보완하기 위하여 PROMETHEE를 활용한 정량적 분석 프로세스를 제시하였다. PROMETHEE를 사용함으로써 AHP 기법에서 분석대상 인자가 9개를 초과 할 때의 신뢰성 저하와 인자의 추가 또는 삭제 시 발생하는 복잡한 산출절차의 문제점을 보완할 수 있을 것으로 기대된다.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.461-467
• /
• 2021

열경화성 소재를 이용하여 열경화방식의 웨이퍼 레벨 렌즈를 성형할 때 발생될 수 있는 불량요인 중 이형과정에서 성형 렌즈의 금형 고착문제는 웨이퍼 레벨에서 성형된 기판의 파손 및 기판의 변형으로 성형된 웨이퍼 기판의 적층시 웨이퍼 양면의 렌즈 형상 및 센터 정렬 오차에 영향을 미친다. 본 연구에서는 웨이퍼 레벨 렌즈 성형 공정에서 이형력에 영향을 미치는 인자를 검토하기 위한 실험을 수행하였다. 먼저 상·하 금형의 코팅 재질에 따른 이형력을 검토하기 위하여 금형 표면을 ITO 및 Ti로 표면처리 후 O2분위기에서 플라즈마 처리하였고, 또한 DLC 코팅도 진행하였으며 경화 및 이형성을 검토하였다. 그 결과를 바탕으로 pull-off 실험을 위한 코팅방법을 선정하였다. 또한 경화공정조건에 따른 이형력을 측정하기 위하여 압력을 유지하면서 경화시키는 방법과 일정한 간격을 유지하면서 경화시키는 방법을 실험적으로 적용하였다. 그 결과 Ti 코팅 후 O2 플라즈마 표면처리 방법이 이형력을 감소시키고 위치를 제어하면서 경화시킬 경우 경화수축에 의해 경화 중 계면의 접착에너지를 감소시켜 보다 나은 이형이 될 수 있음을 확인하였다.

• 벤처혁신연구
• /
• 제7권1호
• /
• pp.201-223
• /
• 2024

창업과 관련된 연구는 비교적 활발하게 이루어지고 있는 편이다. 본 연구에서는 비교적 연구가 적은 청년을 대상으로 한 창업과 관련하여 창업의도에 미치는 영향에 대해 실증 분석을 하였다. 특히 창업 멘토링의 역할에 대해 규명하고자 했다. 이를 위해 전국의 청년을 대상으로 설문조사를 하였고 이중 유효한 250부를 구조방정식 검정하였다. 실증분석 결과는 다음과 같다. 직무스트레스, 주관적 규범, 지각된 행동통제는 청년 창업의도에 유의한 정(+)의 영향을 미쳤다. 기술적 제약은 청년 창업의도에 유의한 부(-)의 영향을 미쳤다. 반면 미래불확실성과 실패부담감은 유의성이 검정되지 않았다. 청년 창업의도에 미치는 영향력의 크기는 지각된 행동통제, 직무스트레스, 기술적 제약, 주관적 규범 순이었다. 창업 멘토링을 받지 않은 집단이 창업 멘토링을 받은 집단보다 직무스트레스, 주관적 규범, 기술적 제약이 창업의도에 미치는 영향이 큰 것으로 나타났다. 본 연구 결과는 학술적으로는 PPM(Push-Pull-Mooring)과 TPB(Theory of Planned Behavior)를 결합한 모형의 창업분야 연구의 유용성을 검정한 것이며, 실무적으로는 창업 멘토링은 청년 창업의도에 미치는 부정적인 요소의 영향력을 감소시키는 효과가 있는 것을 밝혔다는데 의의가 있었다.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.7-16
• /
• 2020

Objective: It is to find factors related to stability through analysis of plantar pressure factors according to the level of instability when performing Snatch. Method: Foot pressure analysis was performed while 10 weightlifters performed 80% of the highest level of Snatch, and motion was classified and analyzed in 3 grades according to the level of instability. Results: First, in Bad Motion, the movement distance of the pressure center in the direction of ML and AP was larger significantly in Phase 2. Second, in Phase 2, the number of zero-crossing in the AP direction was larger statistically significantly in Good Motion. Third, in the bad motion in Phase 3, the number of zero-crossing in the ML direction showed a significantly larger value. Fourth, in Phase 4, it was found that the more stable the lock out motion, the greater the activity of foot controlling in the left and right directions. Fifth, Phase 3, the greater the Maximum/Mean foot pressure value, the more stable the pulling action. Sixth, in Phase 2, the foot pressure was concentrated with a wide distribution in the midfoot and rearfoot. Seventh, the triggering number of the forefoot region was small in the last pull phase. Eighth, the number of triggers in the toe area was significantly higher during Good Motion in Phase 4. Conclusion: Summarizing the factors of instability in Snatch, there was no significant difference in Phase 1 for each condition. In order to enhance the stability in Phase 2, the sensory control ability in the AP direction is required, and focusing the foot pressing motion with a wide distribution in the middle and rear parts increases the instability. In Phase 3, it was found that the more unstable, the more sensory control activity was performed in the ML direction, the stronger the forefoot pressing action should be performed for a stable Snatch. In Phase 4, It is important that the feet sensory control activity in ML directions and the control ability of the toes in order to have stable Lock out motion.

• 서비스연구
• /
• 제7권2호
• /
• pp.91-105
• /
• 2017

본 논문은 IT업계에서 기술 상용화에 영향을 미치는 주요 요인을 파악하고, 기술 상용화 주요요인이 상용화의 성공에 미치는 영향력을 검증하는데 있다. IT 기술 상용화 프로젝트 관리자들은 기술의 상용화에 가장 영향을 미치는 요인으로 '기술 상용화 장려책'을 꼽았고, 뒤이어 '경영층 지원,' '정부 지원,' '관계자간의 협력,' '경영에 대한 이해' 순으로 평가하였다. 회귀분석 결과 기술 상용화에 영향을 미치는 11개 주요 요인은 종합적으로 기술 상용화의 성공에 대한 설명력이 높은 것으로 나타났다. 특히 '기술 상용화 장려책,' '관련자간의 협력,' '수요자 요청 기술'은 유의수준 1%에서 '기술 상용화 경험'은 유의수준 10%에서 통계적으로 유의하여 기술 상용화의 성공에 가장 많은 기여를 하는 것으로 판명되었다. 성공한 상용화 프로젝트의 경우 주요 요인의 기술 상용화의 성공에 대한 설명력(46.80%)이 실패한 프로젝트의 설명력(38.50%)에 비해 높은 것으로 나타났다.

• International Journal of Concrete Structures and Materials
• /
• 제18권1E호
• /
• pp.29-34
• /
• 2006

Elastic modulus, tensile and bond capacities are important factors for developing an effective reinforcing action of a flexural member as a reinforcing material for concrete structures. Reinforcement must have enough bond capacity to prevent the relative slip between concrete and reinforcement. This paper presents an experimental study to clarify the bond capacity of prestressed carbon fiber reinforced polymer(CFRP) rod manufactured by an automatic assembly robot. The bond characteristics of CFRP rods with different pitch of helical wrapping were analyzed experimentally. As the result, all types of CFRP rods show a high initial stiffness and good ductility. The mechanical properties of helical wrapping of the CFRP rods have an important effect on the bond of these rods to concrete after the bond stress reached the yield point. The stress-slip relationship analyzed from the pull-out test of embedded cables within concrete was linear up to maximum bond capacity. The deformation within the range of maximum force seems very low and was reached after approximately 1 mm. The average bond capacity of CF20, CF30 and CF40 was about 12.06 MPa, 12.68 MPa and 12.30 MPa, respectively. It was found that helical wrapping was sufficient to yield bond strengths comparable to that of steel bars.

• Computers and Concrete
• /
• 제26권3호
• /
• pp.257-273
• /
• 2020

Concrete bond strength with steel re-bars depends on multiple factors including concrete-steel interface and mechanical properties of concrete. However, the hydration development of cementitious paste, and in turn the mechanical properties of concrete, are negatively affected by cold weather. This study aimed at exploring the concrete-steel bonding behavior in concrete cast and cured under freezing temperatures. Three concrete mixtures were cast and cured at -10 and -20℃. The mixtures were protected using conventional insulation blankets and a hybrid system consisting of insulation blankets and phase change materials. The mixtures comprised General Use cement, fly ash (20%), nano-silica (6%) and calcium nitrate-nitrite as a cold weather admixture system. The mixtures were tested in terms of internal temperature, compressive, tensile strengths, and modulus of elasticity. In addition, the bond strength between concrete and steel re-bars were evaluated by a pull-out test, while the quality of the interface between concrete and steel was assessed by thermal and microscopy studies. In addition, the internal heat evolution and force-slip relationship were modeled based on energy conservation and stress-strain relationships, respectively using three-dimensional (3D) finite-element software. The results showed the reliability of the proposed models to accurately predict concrete heat evolution as well as bond strength relative to experimental data. The hybrid protection system and nano-modified concrete mixtures produced good quality concrete-steel interface with adequate bond strength, without need for heating operations before casting and during curing under freezing temperatures down to -20℃.

• International Journal of Human Ecology
• /
• 제12권1호
• /
• pp.75-85
• /
• 2011

This study aims to understand the experiences as consumers of Thai students studying in Korea. "Study Korea Project" which is a drive to globalize local universities by attracting more oversea students as a pull factor, and economic growth, values on education and Hallyu as push factors contribute to the increase the number of Thai students in Korea. In order to understand the experiences of Thai students as consumers studying in Korea, individual interviews were conducted. A total of 5 participants were asked about meaning of consumption in everyday life in Korea or any changes in consumption behavior compared to living in Thai. Three themes were identified through wholistic and selective approaches. First, all participants in the study said that they were surprised because of high living expense in Korea. Consequently, survival itself is too much for them and they have become more conscious of prices of goods. Secondly, since most participants in this study can control their own budget, they feel some degree of freedom and power of control of their own lives. This experience may help them to accomplish their developmental tasks during the transition to adulthood. Thirdly, they are easily imbued with Korean consumer culture. It causes various conflicts between buying and not-buying or friends gathering and saving money. Sometimes it makes them in stuck excessive consumption and financial problems. For a deeper understanding of oversea students' lives in Korea as consumers, further studies should take into consideration of not only their culture of origins, but also misconceptions that have accumulated around these students.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.794-798
• /
• 1997

We provide a set of information on technologies to draw meaningful action plans for the inter- nationalization of National R&D activities. In this study, we employed a modified Delphi method to evaluate level od our technological capabilities and developed countries' as well. We investigated technology acquistion methodologies,technology characteristics and various aspects of international cooperation in terms of technology. Then we analyzed final responses of participants (i.e, the third round results of Delphi method) to see the correlation among various factors in developing tehnologies through international R&D cooperation. The technology classification used in this research was developed by STEPI (Science and Technology Policy Institute). In conclusion, levels of our technologies were investigated to be between the stage of imitating/absorbing advanced technologies and the stage of digesting acquired technologies. Especially, comparing with other technologies, mechanical engineering was evaluated to be almost near the stage of digesting acquired technology (the middle level stage of technology). Out overal technological capabilites were evaluated to be 40~60% of top level countries'.

• Agricultural and Biosystems Engineering
• /
• 제4권1호
• /
• pp.34-38
• /
• 2003

A mathematical model was developed for estimating the mechanical interrelation between characteristics of soil and main design factors of a tracked vehicle, and predicting the tractive performance of the tracked vehicle. Based on the mathematical model, a computer simulation program (TPPMTV) was developed in the study. The model considered the continuous change in tension for the whole track of a tracked vehicle, the analysis of shape and tension of the track segment between sprocket and first roadwheel, and the side thrust on both sides of grouser by the active earth pressure theory in predicting the tractive performance of a tracked vehicle. Also, the model contained not only sinkage depth of the track but the pressure distribution under the track in analyzing the side thrust. The effectiveness of the developed model was verified by performing the draw bar pull tests with a tracked vehicle reconstructed for test in loam soil with moisture content of 18.92％. The predicted drawbar pulls by the model were well matched to the measured ones. Such results implied that the model developed in the study could estimate the drawbar pulls well at various soil conditions, and would be very useful as a simulation tool for designing a tracked vehicle and predicting its tractive performance.