1 |
CS164 (2016), Concrete Practice: Guidance on the Practical Aspects of Concreting, The Concrete Society, Good Concrete Guide 8, Camberley, United Kingdom.
|
2 |
CSA-A23.1/A23.2 (2019), Concrete Materials and Methods of Concrete Construction/Test Methods and Standard Practices for Concrete, Canadian Standards Association, Mississauga, ON, Canada.
|
3 |
CSA-A3001 (2018), Cementitious Materials for Use in Concrete, Canadian Standards Association, Mississauga, ON, Canada.
|
4 |
Detwiler, R., Bhatty, J. and Bhattacharja, S. (1996), Supplementary Cementing Materials for Use in Blended Cements, Portland Cement Association, Skokie, IL, USA.
|
5 |
Ratinov, V.B. and Rozenberg, T.I. (1996), Antifreezing Admixtures, Concrete Admixtures Handbook, 2nd Edition, William Andrew Publisher, New York.
|
6 |
RILEM 7-II-128 (1994), RC6: Bond Test for Reinforcing Steel, 1. Pull-out Test for Reinforcement, RILEM (Technical Recommendations for the Testing and Use of Construction Materials, London, UK.
|
7 |
Rixom, M.R. and Mailvaganam, N. (2002), Chemical Admixture for Concrete, CRC Press, Florida, United States.
|
8 |
MacGregor, J.G., Wight, J.K., Teng, S. and Irawan, P. (1997), Reinforced Concrete: Mechanics and Design, 3rd Edition, Prentice Hall, Upper Saddle River, New Jersey, United States.
|
9 |
Liu, F., Wang, J. and Qian, X. (2017), "Integrating phase change materials into concrete through microencapsulation using cenospheres", Cement Concrete Compos., 80, 317-325. https://doi.org/10.1016/j.cemconcomp.2017.04.001.
DOI
|
10 |
Lura, P., Plizzari, G.A. and Riva, P. (2002), "3D finite-element modelling of splitting crack propagation", Mag. Concrete Res., 54(6), 481-493. https://doi.org/10.1680/macr.2002.54.6.481.
DOI
|
11 |
Madani, H., Bagheri, A. and Parhizkar, T. (2012), "The pozzolanic reactivity of monodispersed nanosilica hydrosols and their influence on the hydration characteristics of Portland cement", Cement Concrete Res., 42, 1563-1570. https://doi.org/10.1016/j.cemconres.2012.09.004.
DOI
|
12 |
Farnam, Y., Krafcik, M., Liston, L., Washington, T., Erk, K., Tao, B. and Weiss, J. (2015), "Evaluating the use of phase change materials in concrete pavement to melt ice and snow", J. Mater. Civil Eng., 28(4), 04015161. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001439.
DOI
|
13 |
Diab, A.M., Elyamany, H.E., Hussein, M.A. and Al Ashy, H.M. (2014), "Properties of pull-out bond strength and concept to assess ultimate bond stress of NSC and HSC", Mag. Concrete Res., 66(17), 877-895. https://doi.org/10.1680/macr.14.00009.
DOI
|
14 |
Dorigato, A., Canclini, P., Unterberger, S.H. and Pegoretti, A. (2017), "Phase changing nanocomposites for low temperature thermal energy storage and release", Express. Polym. Lett., 11(9), 738-752.
DOI
|
15 |
El-Hacha, R., El-Agroudy, H. and Rizkalla, S.H. (2006), "Bond characteristics of high-strength steel reinforcement", ACI Struct. J., 103(6), 771.
|
16 |
Fernandes, F., Manari, S., Aguayo, M., Santos, K., Oey, T., Wei, Z., Falzone, G., Neithalath, N. and Sant, G. (2014), "On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials", Cement Concrete Compos., 51, 14-26. https://doi.org/10.1016/j.cemconcomp.2014.03.003.
DOI
|
17 |
Chiriatti, L., Mercado-Mendoza, H., Apedo, K.L., Fond, C. and Feugeas, F. (2019), "A study of bond between steel rebar and concrete under a friction-based approach", Cement Concrete Res., 120, 132-141. https://doi.org/10.1016/j.cemconres.2019.03.019.
DOI
|
18 |
Butler, L., West, J.S. and Tighe, S.L. (2011), "The effect of recycled concrete aggregate properties on the bond strength between RCA concrete and steel reinforcement", Cement Concrete Res., 41(10), 1037-1049. https://doi.org/10.1016/j.cemconres.2011.06.004.
DOI
|
19 |
Cao, V.D., Pilehvar, S., Salas-Bringas, C., Szczotok, A.M., Rodriguez, J.F., Carmona, M., AL-Manasir, N. and Kjoniksen, A.L. (2017), "Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications", Energy Convers. Manage., 133, 56-66. https://doi.org/10.1016/j.enconman.2016.11.061.
DOI
|
20 |
Cassagnabere, F., Mouret, M. and Escadeillas, G. (2009), "Early hydration of clinker-slag-metakaolin combination in steam curing conditions, relation with mechanical properties", Cement Concrete Res., 39(12), 1164-1173. https://doi.org/10.1016/j.cemconres.2009.07.023.
DOI
|
21 |
Meshgin, P. and Xi, Y. (2012), "Effect of phase-change materials on properties of concrete", ACI Mater. J., 109(1), 72-80.
|
22 |
Ghazy, A., Bassuoni, M.T. and Shalaby, A. (2016), "Nanomodified fly ash concrete: a repair option for concrete pavements", ACI Mater. J., 113(2), 231-242.
|
23 |
Gjorv, O.E., Monteiro, P.J. and Mehta, P.K. (1990), "Effect of condensed silica fume on the steel-concrete bond", ACI Mater. J., 87(6), 573-580.
|
24 |
Karagol, F., Demirbog, R. and Khushefati, W.H. (2015), "Behavior of fresh and hardened concretes with antifreeze admixture in deep-freeze low temperatures and exterior winter conditions", Constr. Build. Mater., 76, 388-395. https://doi.org/10.1016/j.conbuildmat.2014.12.011.
DOI
|
25 |
Mahdikhani, M. and Ramezanianpour, A.A. (2014), "Mechanical properties and durability of self consolidating cementitious materials incorporating nano silica and silica fume", Comput. Concrete, 14(2), 175-191. http://dx.doi.org/10.12989/cac.2014.14.2.175.
DOI
|
26 |
Memon, S.A., Cui, H., Lo, T.Y. and Li, Q. (2015), "Development of structural-functional integrated concrete with macro-encapsulated PCM for thermal energy storage", Appl. Energy, 150, 245-257. https://doi.org/10.1016/j.apenergy.2015.03.137.
DOI
|
27 |
Montgomery, D.C. (2017), Design and Analysis of Experiments, 9th Edition, Wiley, New Jersey, United States.
|
28 |
Powers, T.C. and Helmuth, R.A. (1953), "theory of volume changes in hardened portland-cement paste during freezing", Proceedings of the Thirty-Second Annual Meeting of the Highway Research Board, Washington, D.C., United Status, January.
|
29 |
Prado, P.J., Balcom, B.J., Beyea, T.W., Armstrong, R.L. and Grattan-Bellew, P.E. (1998), "Concrete freeze/thaw as studied by magnetic resonance Imagine", Cement Concrete Res., 2(28), 261-270. https://doi.org/10.1016/S0008-8846(97)00222-6.
|
30 |
Kim, J.K., Kim, K.H. and Yang, J.K. (2001), "Thermal analysis of hydration heat in concrete structures with pipe-cooling system", Comput Struct., 79(2), 163-171. https://doi.org/10.1016/S0045-7949(00)00128-0.
DOI
|
31 |
Kim, Y.R., Khil, B.S., Jang, S.J., Choi, W.C. and Yun, H D. (2015), "Effect of barium-based phase change material (PCM) to control the heat of hydration on the mechanical properties of mass concrete", Thermochim Acta, 613, 100-107. https://doi.org/10.1016/j.tca.2015.05.025.
DOI
|
32 |
Korhonen, C.L., Cortez, E.R. and Charest, B.A. (1992), "Strength development of concrete cured at low temperature", Concrete Int., 14(12), 34-39.
|
33 |
LaserComp Inc. (2015), FOX 314 Instrument Manual, Delaware, United States.
|
34 |
Li, X., Chen, H., Li, H., Liu, L., Lu, Z., Zhang, T. and Duan, W.H. (2015), "Integration of form-stable paraffin/nanosilica phase change material composites into vacuum insulation panels for thermal energy storage", Appl. Energy, 159, 601-609. https://doi.org/10.1016/j.apenergy.2015.09.031.
DOI
|
35 |
Aguayo, M., Das, S., Maroli, A., Kabay, N., Mertens, J.C., Rajan, S.D., Sant, G., Chawla, N. and Neithalath, N. (2016), "The influence of microencapsulated phase change material (PCM) characteristics on the microstructure and strength of cementitious composites: Experiments and finite element simulations", Cement Concrete Compos., 73, 29-41. https://doi.org/10.1016/j.cemconcomp.2016.06.018.
DOI
|
36 |
Ruuska, T., Vinha, J. and Kivioja, H. (2017), "Measuring thermal conductivity and specific heat capacity values of inhomogeneous materials with a heat flow meter apparatus", J. Build. Eng., 9, 135-141. https://doi.org/10.1016/j.jobe.2016.11.011.
DOI
|
37 |
Schroeder, H.P. and Wood, T.B. (1996), "Concrete/reinforcing steel bond strength of low-temperature concrete", J. Cold. Reg. Eng., 10(2), 93-117. https://doi.org/10.1061/(ASCE)0887-381X(1996)10:2(93).
DOI
|
38 |
Abayou, A., Yasien, A. and Bassuoni, M. (2019), "Properties of nanosilica-modified concrete cast and cured under cyclic freezing/low temperatures", Adv. Civil Eng., 8(3), 287-306. https://doi.org/10.1520/ACEM20190013.
|
39 |
ACI-306R (2016), Guide to Cold Weather Concreting, American Concrete Institute, Farmington Hills, Michigan.
|
40 |
ACI-318 (2019), Building Code Requirements for Structural Concrete, American Concrete Institute, Farmington Hills, Michigan.
|
41 |
Ahmad, S., Pilakoutas, K., Rafi, M.M. and Zaman, Q.U. (2018), "Bond strength prediction of steel bars in low strength concrete by using ANN", Comput. Concrete, 22(2), 249-259. https://doi.org/10.12989/cac.2018.22.2.249.
DOI
|
42 |
ANSYS Inc. (2019), Ansys Mechanical Apdl Verification Manual 2019R3, Pennsylvania, United States.
|
43 |
ANSYS Inc. (2020), Ansys Fluent Theory Guide 2020R1, Pennsylvania, United States.
|
44 |
Yasien, A. and Bassuoni. M. (2019), "Nano-modified concrete at sub-zero temperatures: experimental and statistical modelling", Mag. Concrete Res., 2019, 1-20. https://doi.org/10.1680/jmacr.19.00437.
DOI
|
45 |
Tanabe, T.A., Kawasumi, M. and Yamashita, Y. (1985), "Thermal stress analysis of massive concrete", Finite Element Analysis of Reinforced Concrete Structures, ASCE, Tokya, Japan, May.
|
46 |
Yankelevsky, D.Z. (1985), "New finite element for bond-slip analysis", J. Struct. Eng., 111(7), 1533-1542. https://doi.org/10.1061/(ASCE)0733-9445(1985)111:7(1533).
DOI
|
47 |
Yankelevsky, D.Z., Jabareen, M. and Abutbul, A.D. (2008), "One-dimensional analysis of tension stiffening in reinforced concrete with discrete cracks", Eng. Struct., 30(1), 206-217. https://doi.org/10.1016/j.engstruct.2007.03.013.
DOI
|
48 |
Mills, A.F. (1999), Basic Heat and Mass Transfer, Prentice Hall, New Jersey, United States.
|
49 |
Neville, A.M. (2011), Properties of Concrete, Prentice Hall, London, UK.
|
50 |
ASTM C138/C138M (2017), Standard Test Method for Density (unit weight), Yield, and Air Content (gravimetric) of Concrete, American Society for Testing and Materials, West Conshohocken, PA, USA.
|
51 |
ASTM C1784 (2020), Measuring Thermal Conductivity and Specific Heat Capacity Values of Inhomogeneous Materials with a Heat Flow Meter Apparatus, American Society for Testing and Materials, West Conshohocken, PA, USA.
|
52 |
ASTM C494/C494M (2019), Standard Specification for Chemical Admixtures for Concrete, American Society for Testing and Materials, West Conshohocken, PA, USA.
|
53 |
ASTM C260/C260M (2016), Standard Specification for Air-Entraining Admixtures for Concrete, American Society for Testing and Materials, West Conshohocken, PA.
|
54 |
ASTM C39/C39M (2020), Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, American Society for Testing and Materials, West Conshohocken, PA, USA.
|
55 |
ASTM C469/C469M (2014), Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression, American Society for Testing and Materials,West Conshohocken, PA, USA.
|
56 |
ASTM C496/C496M (2017), Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, American Society for Testing and Materials, West Conshohocken, PA, USA.
|
57 |
Baetens, R., Jelle, B.P. and Gustavsen, A. (2010), "Phase change materials for building applications: a state-of-the-art review", Energy Build., 42(9), 1361-1368. https://doi.org/10.1016/j.enbuild.2010.03.026.
DOI
|
58 |
Bahekar, P.V. and Gadve, S.S. (2019), "Corrosion of rebar in carbon fiber reinforced polymer bonded reinforced concrete", Adv. Concrete Constr., 8(4), 247-255. https://doi.org/10.12989/acc.2019.8.4.247.
DOI
|
59 |
Bergman, T.L., Incropera, F.P., DeWitt, D.P. and Lavine, A.S. (2011), Fundamentals of Heat and Mass Transfer, John Wiley & Sons, New Jersey, United States.
|
60 |
Barna, L.A., Seman, P.M. and Korhonen, C.J. (2011), "Energy-efficient approach to cold-weather concreting", J. Mater. Civil Eng., 23(11), 1544-1551. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000262.
DOI
|