• 방송공학회논문지
• /
• 제18권6호
• /
• pp.911-918
• /
• 2013

본 논문에서에서는 방사저항이 낮고, 다중 공진을 갖는 초광대역 특성을 갖는 평판형 안테나를 FDTD법을 적용하여 그 특성을 분석하였다. 본 안테나를 FDTD 법을 사용하여 모델링하여 파의 전파 과정, 전계 분포를 시간영역에서 각각 계산하였고, FDTD 법으로 얻은 값들을 Fourier 변환하여 최적화된 슬롯 안테나의 전반사손실, 정재파비, 복사패턴을 주파수 영역에서 계산하였다. 실험 및 측정한 결과, 안테나의 최대 대역폭은 VSWR ${\leq}$ 2.0 에서 1.85~6.35GHz(중심주파수 4.5GHz)의 초광대역 특성을 보였다. 측정된 결과는 FDTD 결과와 비교적 잘 일치하였다. 본 안테나는 소형이고 경량이면서 초광대역 특성을 요구하는 UWB, 방송용 시스템에 적용이 가능하리라 판단된다.

• 한국통신학회논문지
• /
• 제37권2C호
• /
• pp.168-172
• /
• 2012

본 논문에서는 바코드 중에서 국가코드 부분을 활용하여 UHF 대역의 RFID 태그 안테나를 도전성 잉크로 설계 및 제작하였다. 바코드는 일반 종이 박스에서 흔히 볼 수 있는 바코드를 샘플 바코드로 사용하였다. 제작 방법은 도전성 잉크로 제작된 바코드 모양의 도전율을 측정하고, 그 측정치를 simulation 프로그램에 입력하여 설계하였다. 제작된 태그 안테나는 T-매칭 방식을 채택하여 크기를 줄이고, 제작된 태그는 바코드의 인식과 UHF 대역 RFID 태그 인식이 모두 만족할 수 있게 제작하였다. 임피던스를 측정하여 태그 칩과의 정합정도를 계산하였고, 인식거리 패턴을 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.55-58
• /
• 2001

In this paper, we present the results of the design and fabrication of the VCO(Voltage controlled Oscillator) using RF circuit simulator GENESYS and electromagnetic field simulator EMpower Frequency range is fabricated VCO is 850 MHz ~ 950 MHz, which is used Colpitts Circuit. the fabricated VCO is consisted of resonator, oscillator and MSL(Microstrip Line) is used in LC tuning circuit.(operated by negative feedback) MSL(Microstrip Line), Varactor(Plastic package), low noise TR(SOT-23), chip inductor(1608), chip capacitor(1005), chip resistance(1005). 1005 type is used for sample fabrication of VCO. In the fabrication process, circuit pattern is screen printed on the alumina substrates of over 99.9% purity. Center frequency of the sample VCO is 850MHz at $V_T=1.5V$, while the simulated value was 1.0GHz at $V_T=1.5V$. Variable frequency range of the sample is 860~950MHz in contrast to the 1068~1100MHz of the simulated values.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.153-156
• /
• 2001

In this paper, we present the results of the design and fabrication of the VCO(Voltage controlled Oscillator) using RF circuit simulator GENESYS and electromagnetic field simulator EMpower Frequency range is fabricated VCO is 850 MHz ~ 950 MHz, which is used Colpitts Circuit. the fabricated VCO is consisted of resonator, oscillator and MSL(Microstrip Line) is used in LC tuning circuit.(operated by negative feedback) MSL(Microstrip Line), Varactor(Plastic package), low noise TR(SOT-23), chip inductor(1608), chip capacitor(1005), chip resistance(1005). 1005 type is used for sample fabrication of VCO. In the fabrication process, circuit pattern is screen printed on the alumina substrates of over 99.9% purity. Center frequency of the sample VCO is 850MHz at $V_T$=1.5V, while the simulated value was 1.0GHz at $V_T$=1.5V. Variable frequency range of the sample is 860~950MHz in contrast to the 1068~1100MHz of the simulated values.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.15-17
• /
• 2004

The quality of X -ray image is depending on the acquired signal pattern So far, the MTF(modulation transfer function) of medical image system has been obtained through various kinds of calculationprocesses after using SWRF (A square wave response function method) to print out it into films. In this study, a tool has been developed that can help the actual user who actually creates the medical images measure the MTF of the finaldisplay image very simply by applying Borland C++ builder software as well as LEAD tools software for the SWRF calculation process to analyze the MTF even on the display image. Films have been printed out by this newly developed MTF measuring tool under the same conditions with the ones for the existing tools and also the calculation method has shown no difference with any existing SWRF calculation method. By using this, it was found out that the MTF of the resolving power of the computed radiography(CR) Image plate (IP) that is a conventional X-ray detection system Jar the conventional X-ray purpose was about 10% at the range of 3.00 LP/mm.

• 반도체디스플레이기술학회지
• /
• 제10권4호
• /
• pp.125-130
• /
• 2011

The recent PCB (Printed Circuit Board) wet etcher has been needed to process pattern within $20{\mu}m$ width on a $20{\mu}m$ thick board. A previous PCB etcher can be used with multiple points of roller rolls or slips off a board. Also, the damage of the board by contacting the roller increases the friction defects. A vertical type boards transporting process is developed to solve the problems of boards friction and sagging in a horizontal etcher. In this research, CFD (Computational Fluid Dynamics) method is used to design an improved spray nozzle including the critical part of etcher, and establish the design method. Meanwhile, major spray characteristics are expected in diverse nozzle types and variables. Lastly, diverse simulation results are adapted to design an improved nozzle and spray system.

• Bulletin of the Korean Chemical Society
• /
• 제29권7호
• /
• pp.1349-1352
• /
• 2008

We report a novel patterning method for a homo-polymeric poly(3-hexylthiophene) (P3HT) nanofilm particularly capable of strong adhesion to a $SiO_2$ surface. An oxidized silicon wafer substrate was micro-contact printed with n-octadecyltrichlorosilane (OTS) monolayer, and subsequently its negative pattern was selfassembled with three different amino-functionalized alkylsilanes, (3-aminopropyl)trimethoxysilane (APS), N- (2-aminoethyl)-3-aminopropyltrimethoxy silane (EDAS), and (3-trimethoxysilylpropyl) diethylenetriamine (DETAS). Then, P3HT nanofilms were selectively grown on the aminosilane pre-patterned areas via the vapor phase polymerization method. To evaluate the adhesion, patterning, and the film itself, the PEDOT nanofilms and SAMs were investigated with a $Scotch^{(R)}$ tape test, contact angle analyzer, ATR-FT-IR, and optical and atomic force microscopes. The evaluation showed that the newly developed all bottom-up process can offer a simple and inexpensive patterning method for P3HT nanofilms robustly adhered to an oxidized Si wafer surface by the mediation of $FeCl_3$ and amino-functionalized alkylsilane SAMs.

• 말소리와 음성과학
• /
• 제6권2호
• /
• pp.123-131
• /
• 2014

The purpose of this study is to investigate the comprehension and production of various tense markings in Korean-speaking children with and without language delay. Thirty children with language delay(LD) and 30 typically developing(TD) children participated in the study. In each group, half were at the age of 4-years and the other half at 7-years. In both the comprehension and production task, 28 verbs containing four types of tense markings were used: past tense '-et ta', two present progressives '-ko itta', '-enta', and future tense '-elyeko hanta'. In the comprehension task, the children were presented with three printed still-scenes of video recording of a verb action, each representing future, present progressive, and past tense of the verb, respectively. Then they listened to the action verb with one of the 4 tense markings and had to pick the scene that matched the verb tense. In the production task, the children were given one of the three scenes and asked to produce the verb with appropriate tense marking. In both tasks, the LD children performed significantly worse than the TD children, and the older children performed significantly better than the younger children. Interestingly, the pattern of performances across different types of tense markings at the two language-age levels were closely similar in LD children and TD children. This similarity of groups seemed stronger in the comprehension task than the production task.

• Journal of electromagnetic engineering and science
• /
• 제14권3호
• /
• pp.299-305
• /
• 2014

A wideband circularly polarized (CP) antenna with a single feed is proposed for use in global navigation satellite systems. Its primary radiation elements are composed of two orthogonal bowtie dipoles, which are equipped with double-printed vacant-quarter rings to allow direct matching of the antenna to a single $50-{\Omega}$ coaxial line and to produce CP radiation. The crossed bowtie dipole is appropriately incorporated with a planar metallic reflector to produce the desired unidirectional radiation pattern as well as to achieve a wideband characteristic in terms of impedance matching and axial ratio (AR) bandwidths. The designed antenna was fabricated and measured. The prototype antenna with an overall 1.2-GHz frequency size of $0.48{\lambda}_o{\times}0.48{\lambda}_o{\times}0.25{\lambda}_o$ produced a measured ${\mid}S_{11}{\mid}$<-10 dB bandwidth of 1.05-1.79 GHz and a measured 3-dB AR bandwidth of 1.12-1.64 GHz. It also showed right-hand CP radiation with a small gain variation (${\pm}0.3dB$) and high radiation efficiency (>93%) over the operational bandwidth.

• 한국BIM학회 논문집
• /
• 제9권3호
• /
• pp.8-18
• /
• 2019

Precast concrete manufacturing has proved economies of scale through the repetitive production by means of standardization, automation, and prefabrication. Advanced digital design and fabrication technologies can empower its benefits by enabling mass customization in the building design and construction. This study analyzed five case studies in terms of 1) design intent and background, 2) module development and facade construction, 3) integrated process among project stakeholder. This article has attempted to establish the following three points in conclusion: 1) Form generating digital design tools such as Rhino, CATIA, Generative Component, and Digital Project were implemented to produce parametric surface pattern and rationalization to maximize existing precast manufacturing benefits. Also, BIM program has been used to promote coordination and communication among engineering consultants and contractors, 2) In addition to traditional precast concrete materials, GFRC, RFP, brick cladding precast and 3D printed mould have been introduced to reduce the weight and cost and to comply the code from the zoning, seismic, and fireproof requirements, 3) Design-assist contract, design-assist financial support, and co-location measures have been introduced to facilitate collaboration between architect, fabricator, and contractor from the beginning of the project.