• Korean Journal of Poultry Science
• /
• v.44 no.4
• /
• pp.245-251
• /
• 2017

A dose-response experiment was conducted to determine the lysine requirement for broiler breeder hens during pre-peak production. Totally, one hundred and twenty-six flock 23-week-old Ross 308 broiler breeder hens with similar body weight were selected ($2,188{\pm}32g$) for a 6-week experiment. Hens were fed with a basal diet of corn-wheat-soybean meal formulated to achieve the Ross 308 breeder nutrient specifications (2016), except for lysine. The 7 graded, daily lysine intake levels used in this experiment were 732, 785, 838, 891, 944, 997, and 1,050 mg, and hens were restricted to 133 g of feed throughout this experiment. Pen based egg production were recorded once a day and all eggs were weighed daily. Age at sexual maturity was determined when the hens attained age at 25% production. Body weight at 23~29 weeks of age was not affected (P>0.05) by lysine levels. By fitting a linear-plateau model, the daily lysine requirements for feed conversion ratio, total produced egg weight, and age at sexual maturity at 23~29 weeks of age were estimated as 865, 907, and 891 mg, respectively. Using a quadratic-plateau model, the daily lysine requirement at 23~29 weeks of age were estimated as 974, 964, and 950 mg for feed conversion ratio, total produced egg weight, and age at sexual maturity, respectively. These results suggested that the daily lysine requirement for modern broiler breeder hens according to the National Research Council (1994) are insufficient for higher total produced egg weight, sexual maturity, and feed efficiency, and 120% of the NRC recommendation level would improve hen productivity when data are fitted under linear- and quadratic-plateau models.

• Journal of Korea Multimedia Society
• /
• v.16 no.6
• /
• pp.764-781
• /
• 2013

In this paper, we propose a highly precise vehicle detection method with low false alarm using billboard sweep stereo matching and multi-stage hypothesis generation. First, we capture stereo images from cameras established in front of the vehicle and obtain the disparity map in which the regions of ground plane or background are removed using billboard sweep stereo matching algorithm. And then, we perform the vehicle detection and tracking on the labeled disparity map. The vehicle detection and tracking consists of three steps. In the learning step, the SVM(support vector machine) classifier is obtained using the features extracted from the gabor filter. The second step is the vehicle detection which performs the sobel edge detection in the image of the left camera and extracts candidates of the vehicle using edge image and billboard sweep stereo disparity map. The final step is the vehicle tracking using template matching in the next frame. Removal process of the tracking regions improves the system performance in the candidate region of the vehicle on the succeeding frames.

• Clinical and Experimental Reproductive Medicine
• /
• v.28 no.2
• /
• pp.147-153
• /
• 2001

Objective: The present study was performed to investigate the efficiency of partial laser assisted hatching (p-LAH; lased 1/2 ZP width from ZP edge) on hatching of mouse blastocysts. Methods: We used non-contact $1.48{\mu}m$ diode laser (MTM, Switzland) to create a precise hole on zona pellucida. 2-cell embryos were collected from the mouse (ICR) oviduct at 48 hours after hCG administration. Collected 2-cell embryos were cultured in the P-1 medium supplemented with 0.4% BSA. For experiments, embryos at 8-cell stage were used after $20{\sim}22$ hours in culture. After conventional (c-LAH) or partial laser assisted hatching, the embryos were further cultured in P-1 medium supplemented with 0.4% BSA for 3 days. To compare efficiency of complete and partial laser assisted hatching, hatching rate, hatching time and blastocyst diameter and zona pellucida thickness at hatching time were investigated. Embryos were examined every 12 hours. Blastocyst diameter and zona pellucida thickness at hatching time were measured with an ocular micrometer. Results: Hatching rates of p-LAH group (84.2%) was significantly higher than that of control group (39.3%), but there was no difference between the p-LAH (84.2%) and c-LAH (91.2%). p-LAH group was hatched 12 hours earlier than control group, but hatched 12 hours later than c-LAH group. The diameter of blastocyst at hatching time of p-LAH group ($113.1{\pm}6.4{\mu}m$) was smaller than that of control group ($122.2{\pm}5.0{\mu}m$), but larger than that of c-LAH group ($102.2{\pm}2.7{\mu}m$). Zona pellucida thickness at hatching time of p-LAH group ($6.4{\pm}0.9{\mu}m$) was thicker than that of control group ($4.5{\pm}1.5{\mu}m$), but thinner than that of c-LAH group ($10.0{\pm}0.8{\mu}m$). Conclusion: These results suggest that p-LAH may maintains the cell arrangement of early embryos to ensure successful development and prevent precocious hatching of blastocyst when compare to c-LAH and conventional (acidic tyrode) AH. Thus, p-LAH may provide a valuable and effective AH technique for human ART program.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.11
• /
• pp.13-22
• /
• 2010

This paper proposed the dual-loops multiphase DLL based mixed VCO/VCDL for a high frequency phase noise suppression of the input clock and the multiple frequencies generation with a precise duty cycle. In the proposed architecture, the dual-loops DLL uses the dual input differential buffer based nMOS source-coupled pairs at the input stage of the mixed VCO/VCDL. This can easily convert the input and output phase transfer of the conventional DLL with bypass pass filter characteristic to the input and output phase transfer of PLL with low pass filter characteristic for the high frequency input phase noise suppression. Also, the proposed DLL can correct the duty-cycle error of multiple frequencies by using only the duty-cycle correction circuits and the phase tracking loop without additional correction controlled loop. At the simulation result with $0.18{\mu}m$ CMOS technology, the output phase noise of the proposed DLL is improved under -13dB for 1GHz input clock with 800MHz input phase noise. Also, at 1GHz operating frequency with 40%~60% duty-cycle error, the duty-cycle error of the multiple frequencies is corrected under $50{\pm}1%$ at 2GHz the input clock.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.512-519
• /
• 2015

Although Quaternary marine terraces and onshore paleo-shoreline records provide clues to our understanding for the mode and nature of neotectonics in the Korean peninsula, it cannot be accomplished without knowledge on both independent information of the past sea level records and tectonic deformation field together with precise results of numerical dating for higher terraces. This study reported cosmogenic radionuclides ($^{10}Be$) dating results conducted in higher terraces in the eastern and western coasts of the Korean peninsula. As a result, the measured concentration ratio of $^9Be/^{10}Be$ and the exposure ages were much younger than expected. It implies that either there is possibility of error in experimental processes or the samples experienced a complex exposure history probably included a burial at some stage. Considering the past climatic conditions around the Korean peninsula and a possible complex exposure history after the emergence of marine terrace, the discovery of a suitable study area and a sampling site are an essential part of successful $^{10}Be$ dating technique.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.447-454
• /
• 2016

In the meantime, looking at the present status of how to estimationte the quantity of rebar based on 3D BIM getting the limelight in these days, commercial BIM tools provide rebar modeling functions however it takes a vast amount of modeling time for modeling of rebar in use of that function hence there is no BIM software at present for practical use. Therefore, in this study, we organized and presented a practical rebar quantity estimationtion process in BIM-based design work-site and intended to develop a program named Rebar Automatic Arrangement Program - hereinafter called RAAP - which enables automatic rebar arrangement based on much more precise cross-sectional information of bars in column, beam, slab and wall than the one from existing 2D method under the conditions without any cross-sectional information in the initial design phase. In addition, we intended to establish rebar quantity estimationtion process in the initial design phase through interworking of modeling & quantity estimationtion functions in consideration of joint, anchoring length of BuilderHUB as a BIM software with RAAP. The results from this study are practical in developing a technology that is able to estimationte quantity with more improved reliability than the one from existing 2D-based methods with less effort when the quantity of framework is estimationted in the uncompleted state of cross-sectional design for structural members in the initial design phase of a construction project. And it is expected that it could be utilized as a basic study from which a reasonable quantity estimationtion program can be established in the initial design phase.

• Journal of The Korean Astronomical Society
• /
• v.51 no.1
• /
• pp.17-25
• /
• 2018

Detecting exoplanets around giant stars sheds light on the later-stage evolution of planetary systems. We observed the M giant HD 18438 and the K giant HD 158996 as part of a Search for Exoplanets around Northern circumpolar Stars (SENS) and obtained 38 and 24 spectra from 2010 to 2017 using the high-resolution Bohyunsan Observatory Echelle Spectrograph (BOES) at the 1.8m telescope of Bohyunsan Optical Astronomy Observatory in Korea. We obtained precise RV measurements from the spectra and found long-period radial velocity (RV) variations with period 719.0 days for HD 18438 and 820.2 days for HD 158996. We checked the chromospheric activities using Ca $\text\tiny{II}$ H and $H{\alpha}$ lines, HIPPARCOS photometry and line bisectors to identify the origin of the observed RV variations. In the case of HD 18438, we conclude that the observed RV variations with period 719.0 days are likely to be caused by the pulsations because the periods of HIPPARCOS photometric and $H{\alpha}$ EW variations for HD 18438 are similar to that of RV variations in Lomb-Scargle periodogram, and there are no correlations between bisectors and RV measurements. In the case of HD 158996, on the other hand, we did not find any similarity in the respective periodograms nor any correlation between RV variations and line bisector variations. In addition, the probability that the real rotational period can be as longer than the RV period for HD 158996 is only about 4.3%. Thus we conclude that observed RV variations with a period of 820.2 days of HD 158996 are caused by a planetary companion, which has the minimum mass of 14.0 $M_{Jup}$, the semi-major axis of 2.1 AU, and eccentricity of 0.13 assuming the stellar mass of $1.8 M_{\odot}$. HD 158996 is so far one of the brightest and largest stars to harbor an exoplanet candidate.

• Research in Plant Disease
• /
• v.23 no.2
• /
• pp.168-176
• /
• 2017

Root-dipping inoculation method has been widely used to determine the resistance of watermelon to Fusarium oxysporum f. sp. niveum causing Fusarium wilt. Although this method leads to the precise results of plant disease responses, more rapid and efficient assay methods have been still required because the root-dipping inoculation method is labor-intensive and time-consuming. In this study, we established a simple and effective bioassay method based on the comparison of various inoculation methods and growth conditions. To develop the system, the occurrence of Fusarium wilt on four resistant and susceptible cultivars was investigated by four different inoculation methods, root-dipping, scalpel, tip and soil-drenching methods. Of these inoculation methods, scalpel method resulted in clear plant disease resistance responses with the simplicity. With the use of scalpel method, we also explored the disease development of the cultivars depending on inoculum concentration, growth stage of seedlings, and incubation temperature after inoculation. Furthermore, we found that the resistance degrees of 23 cultivars derived by scalpel inoculation method were similar to the results by root-dipping method established previously.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.29 no.4
• /
• pp.59-72
• /
• 1987

Although long-term runoff analysis is important as much as flood analysis in the design of water works, the technological level of the former is relatively lower than that of the latter. In this respect, the precise estimation model for the volume of successive runoff should he developed as soon as possible. Up to now, in Korea, Gajiyama's formula has been widely used in long-term runoff analysis, which has many problems in applying in real situation. On the other hand, in flood analysis, unit hydrograph method has been exclusively used. Therefore, this study aims at trying to apply unit hydrograph method in long-term runoff analysis for the betterment of its estimation. Four test catchment areas were selected ; Maesan area in Namlum river as a representative area of Han river system, Cheongju area in Musim river as one of Geum river system, Hwasun area in Hwasun river as one of Yongsan river system, and Supyung area in Geum river as one of Nakdong river system. In the analysis of unit hydrograph, seperation of effective rainfall was carried out firstly. Considering that effective rainfall and moisture condition of catchrnent area are inside and outside of a phenomenon respectively and the latter is not considered in the analysis, Initial base flow(qb)was selected as an index of moisture condition. At the same time, basic equation(Eq.7) was established, in which qb can take a role as a parameter in relating between cumulative rainfall(P) and cumulative loss of rainfall(Ld). Based on the above equation, computer program for estimation model of qbwas seperately developed according to the range of qb, Developed model was applied to measured hydrographs and hyetographs for total 10 years in 4 test areas and effective rainfall was estimated. Estimation precision of model was checked as shown in Tab- 6 and Fig.8. In the next stage, based on the estimated effective rainfall(R) and runoff(Qd), a runoff distribution ratio was calculated for each teat area using by computerised least square method and used in making unit hydrographs in each test area. Significance of induced hydrographs was tested by checking the relative errors between estimated and measured runoff volume(Tab-9, 10). According to the results, runoff estimation error by unit hydrograph itself was merely 2 or 3 %, but other 2 or 3 % of error proved to be transferred error in the seperation of effective rainfall. In this study, special attentioning point is that, in spite of different river systems and forest conditions of test areas, standardized unit hydrographs for them have very similar curve shape, which can be explained by having similar catchinent characteristics such as stream length, catchinent area, slope, and vegetation intensity. That fact should be treated as important factor ingeneralization of unit hydrograph method.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.185-192
• /
• 1999

The present study was performed to investigate the efficacy and safety of laser assisted hatching (AH) on mouse embryos. Non-contact $1.48{\mu}m$ diode laser system used to create a precise hole on zona pellucida. 2-cell embryos were collected from the mice (ICR) that had the coitus vaginal plug confirmed at 48 hours after hCG injection. Collected 2-cell embryos were cultured in the HTF medium supplemented with 0.4% BSA. For experiments, embryos at 8-cell stage were used after 18-22 hours in culture. After assisted hatching, the embryos were further cultured in HTF medium containing 0.1% PVP (anti-hatching system) for 3 days. For evaluate efficiency of laser on mouse embryo hatching, the effect of AH methods (acidic tyrode, pronase and laser), the number of artificial holes (1, 2 and 3 hole) and the irradiation time of laser (2, 4, 6, 8 and 10 ms) were examined. Hatching rates of laser AH group (95.2%) was significantly higher than that of control group (50.8%), but there was no differences among the laser (95.2%), acidic tyrode (100%) and pronase (98.5%) groups. Hatching rates of the number of zona pellucida opening by laser, there were no differences among the 1 hole (87.5%),2 hole (92.1%) and 3 hole (85.9%) groups. Developmental and hatching rates of embryos according to laser irradiation time were similar in the treatment groups. Therefore, these results suggest that laser AH using non-contact $1.48{\mu}m$ diode laser is a simple and accurate and effective procedure for AH. Based on these results, laser AH could be use safely for human ART program.