• Journal of the Korea Society of Computer and Information
• /
• v.15 no.10
• /
• pp.1-9
• /
• 2010

In this paper, we propose a methodology in which a power-delay product of a binary adder is optimized based on the heterogeneous adder architecture. We formulate the power-delay product of the heterogeneous adder by using integer linear programming(ILP). For the use of ILP optimization, we adopt a transformation technique in which the initial non-linear expression for the power-delay product is converted into linear expression. The experimental result shows the superiority of the suggested method compared to the cases in which only conventional adder is used.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.769-776
• /
• 2023

In this paper, we designed an MLSA(Match-line Sense Amplifier) for low-power CAM(Content Addressable Memory). By using the MLSA and precharge controller, we reduced power consumption during CAM operation by employing a selective match-line charging technique to mitigate power consumption caused by mismatch. Additionally, we further reduced power consumption due to leakage current by terminating precharge early when a mismatch occurs during the search operation. The designed circuit exhibited superior performance compared to the existing circuits, with a reduction of 6.92% and 23.30% in power consumption and propagation delay time, respectively. Moreover, it demonstrated a significant decrease of 29.92% and 52.31% in product-delay-product (PDP) and energy-delay-product (EDP). The proposed circuit was validated using SPECTRE simulation with TSMC 65nm CMOS process.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.878-882
• /
• 2019

XOR(exclusive-OR)-XNOR(exclusive NOR) circuit is a basic component of 4-2 compressor for high performance arithmetic operation. In this paper we propose an energy efficient XOR-XNOR circuit. The proposed circuit is reduced the internal parasitic capacitance in critical path and implemented with 8 transistors. The circuit produces a perfect output signals for all input combinations. Compared with the previous circuits, the proposed circuit has a 14.5% reduction in propagation delay time and a 1.7% increase in power consumption. Therefore, the proposed XOR-XNOR is reduced power-delay- product (PDP) by 13.1% and energy-delay-product (EDP) by 26.0%. The proposed circuits are implemented with standard CMOS 0.18um technology and verified through SPICE simulation with 1.8V supply voltage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.2
• /
• pp.291-298
• /
• 2023

SRAM-based in-memory computing is one of the technologies to solve the bottleneck of von Neumann architecture. In order to achieve SRAM-based in-memory computing, it is essential to design efficient SRAM bit-cell. In this paper, we propose a low-power differential sensing 8+T SRAM bit-cell which reduces power consumption and improves circuit performance. The proposed 8+T SRAM bit-cell is applied to ripple carry adder which performs SRAM read and bitwise operations simultaneously and executes each logic operation in parallel. Compared to the previous work, the designed 8+T SRAM-based ripple carry adder is reduced power consumption by 11.53%, but increased propagation delay time by 6.36%. Also, this adder is reduced power-delay-product (PDP) by 5.90% and increased energy-delay- product (EDP) by 0.08%. The proposed circuit was designed using TSMC 65nm CMOS process, and its feasibility was verified through SPECTRE simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.2
• /
• pp.351-356
• /
• 2022

The parity function can be implemented with XOR (exclusive-OR) and XNOR (exclusive NOR) circuit. In this paper we propose a high performance XOR-XNOR circuit. The proposed circuitreduced the internal load capacitance on critical path and implemented with 8 transistors. The circuit produces a perfect output signals for all input combinations. Compared with the previous circuits, the proposed circuit presents the improved characteristics in average propagation delay time, power dissipation, power-delay product (PDP), and energy-delay-product (EDP). The proposed circuits are implemented with standard CMOS 0.18um technology. Computer simulations using SPICE show that the proposed circuit realizes the expected logic functions and achieves a reasonable performance.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.302-317
• /
• 2017

This paper proposes a new full adder design based on pass-transistor logic that offers ultra-low power dissipation and superior variability together with low transistor count. The pass-transistor logic allows device count reduction through direct logic realization, and thus leads to reduction in the node capacitances as well as short-circuit currents due to the absence of supply rails. Optimum transistor sizing alleviates the adverse effects of process variations on performance metrics. The design is subjected to a comparative analysis against existing designs based on Monte Carlo simulations in a SPICE environment, using the 22-nm CMOS Predictive Technology Model (PTM). The proposed ULP adder offers 38% improvement in power in comparison to the best performing conventional designs. The trade-off in delay to achieve this power saving is estimated through the power-delay product (PDP), which is found to be competitive to conventional values. It also offers upto 79% improvement in variability in comparison to conventional designs, and provides suitable scalability in supply voltage to meet future demands of energy-efficiency in portable applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.5
• /
• pp.777-784
• /
• 2023

A sense amplifier is an essential peripheral circuit for designing a memory and is used to sense a small differential input signal and amplify it into digital signal. In this paper, a high-speed sense amplifier applicable to in-memory computing circuits is proposed. The proposed circuit reduces sense delay time through transistor Mtail that provides an additional discharge path and improves the circuit performance of the sense amplifier by applying m-GDI (: modified Gate Diffusion Input). Compared with previous structure, the sense delay time was reduced by 16.82%, the PDP(: Power Delay Product) by 17.23%, the EDP(: Energy Delay Product) by 31.1%. The proposed circuit was implemented using TSMC's 65nm CMOS process, while its feasibility was verified through SPECTRE simulation in this study.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.1-8
• /
• 1998

In this paper, we designed a low power 8bit ELM adder with static CMOS and hybrid logic styles on a chip. The designed 8bit ELM adder with both logic styles was fabricated in a 0.8$\mu\textrm{m}$ single-poly double-metal, LG CMOS process and tested. Hybrid logic style consists of CCPL(Combinative Complementary Pass-transistor Logic), Wang's XOR gate and static CMOS for critical path which determines the speed of ELM adder. As a result of chip test, the ELM adder with hybrid logic style is superior to the one with static CMOS by 9.29% in power consumption, 14.9% in delay time and 22.8% in PDP(Power Delay Product) at 5.0V supply voltage, respectively.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.67-70
• /
• 2003

In this paper the main topologies of one-bit full adders, including the most interesting of those recently proposed, are analyzed and compared for speed, power consumption, and power-delay product. The comparison has been performed on circuits, optimized transistor dimension to minimize power-delay product. The investigation has been carried out with properly defined simulation runs on a Cadence environment using a 0.25-${\mu}m$ process, also including the parasitics derived from layout. Performance has been also compared for different supply voltage values. Thus design guidelines have been derived to select the most suitable topology for the design features required. This paper also proposes a novel figure of merit to realistically compare n-bit adders implemented as a chain of one-bit full adders. The results differ from those previously published both for the more realistic simulations carried out and the more appropriate figure of merit used. They show that, except for short chains of blocks or for cases where minimum power consumption is desired, topologies with only pass transistors or transmission gates are not attractive.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.42-47
• /
• 2011

The partial product matrix (PPM) of a parallel squarer is symmetric. To reduce the depth of PPM, it can be folded, shifted and rearranged. In this paper, we present an area-efficient squarer design method using new partial product rearrangement. Also, a fixed-width squarer design method of the proposed squarer is presented. By simulations, it is shown that the proposed squarers lead to up to 17% reduction in area, 10% reduction in propagation delay and 10% reduction in power consumption compared with previous squarers. By using the proposed fixed-width squarers, the area, propagation delay and power consumption can be further reduced up to 30%, 16% and 28%, respectively.