• 제목/요약/키워드: powder-in-tube

검색결과 213건 처리시간 0.032초

2G 고온초전도 도체를 이용한 전류리드 제작 및 특성 (Fabrication and characteristics of current lead with 2G HTS tapes)

  • 손명환;김석호;심기덕;배준한;이석주;엄범용;박해용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2009년도 제40회 하계학술대회
    • /
    • pp.760_761
    • /
    • 2009
  • 초전도 시스템에서 전류를 공급하는 역할을 하는 전류리드는 없어서는 안 될 핵심 부품이다. Powder-in-tube(PIT) 법으로 제작한 1세대(1G) 고온초전도 선재보다 열전달특성이 나쁜 2세대(2G) 고온초전도 선재를 이용하여 고온초전도 전류리드를 제작하였다. 사용한 선재는 미국 AMSC사 선재이다. 초전도 자석으로의 열침입을 최소화하기 위해 지지구조물은 GFRP를 사용하였고 금속연결부는 무산소동을 사용하였다. 2G 선재 6가닥을 사용하여 제작한 전류리드는 액체질소 온도에서 I-V 특성을 평가한 결과 약 400 A급 전류리드도 사용 가능하다고 판단되었으며, 열전달 특성을 측정하기 위해 무냉매형 특성평가장치를 사용하였는데, 77 K과 7 K 사이에서 약 50 mW정도 였다. 본 논문에선 2G 고온초전도 선재를 사용하여 제작한 전류리드의 전기적 열적 특성에 대해 논의하고자 한다.

  • PDF

6 더블팬케이크 Bi-2223 고온초전도 마그네트 제작 (Fabrication of 6 double pancakes Bi-2223 HTS magnet)

  • 하홍수;장현만;이남진;오상수;하동우;류강식;이해근;이준석
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.373-377
    • /
    • 1999
  • HTS magnet operated at 20${\sim}$40 K was fabricated using three pieces of 100 m Bi-2223 high temperature superconductors fabricated by powder-in-tube process. It was composed of 6 double pancakes with 75 ID. and 113 OD. connected by lab splice. Coil I$_c$ of each DP.(double pancake) obtained for a 140 turn, fabricated using react and wind procedure was 6${\sim}$8 A at 77 K, self field. The maximum field was measured 0.06 T at lop = 5 A, 77 K. The joint resistance due to lap splice of HTS tapes affect badly to operate HTS magnet with persistent current mode, total effective magnet resistance included lap splice was 55 ${\mu}$ ${\omega}$ at 77 K.

  • PDF

근관내 주요 혐기성 병인균에 대한 수종 항생제와 근관충전용 세멘트의 항균효과에 관한 연구 (ANTIMICROBIAL EFFECT OF ANTIBIOTICS AND ROOT CANAL CEMENTS ON THE PREDOMINANT PATHOGENIC ANAEROBIC MICROFLORA IN ROOT CANALS)

  • 배광식
    • Restorative Dentistry and Endodontics
    • /
    • 제18권2호
    • /
    • pp.515-525
    • /
    • 1993
  • The purpose of this study was to evaluate the susceptibility of anaerobic microorganisms to certain antibiotics and root canal cements. Prevotella intermedia(Bacteroides intermedius) ATCC 25611(serotype A), Fusobacterium nucleatum ATCC 25586, Actinomyces viscosus ATCC 15987 which are the predominant pathogenic anaerobes in dental root canals were cultured in BHI for 48 hours(Fig.1). After each $200{\mu}l$ of those broths with microorganisms was streaked on each surface of blood agar plate, 2 to 5 antibiotic discs which are impregnated with Tetrncycline, Erythromycin, Ampicillin, Clindamycin, or Vancomycin were applied on each surface of blood agar plate and cultured for 5 days anaerobically in the anaerobic chamber (Fig.2). 15 antibiotic discs for each kind of antibiotics and each species of microorganisms were tested. Also each kind of root canal cement tubes which include Zinc oxide eugenol cement, Zinc phosphate cement, Calcium hydroxide powder+DD.W., Calcium hydroxide paste(Pulpdent Tempcanal), or Vitapex(Table 1) were applied on the inoculated BAPs after $200{\mu}l$ of each experimental species of microorganisms was streaked on the surface of blood agar plates, and they were cultured for 5 days anaerobically in the anaerobic chamber(Fig.3). The sensitivity(antimicrobial effect) was determined by the diameter of the inhibition zone. The results are as follows: 1. The results of antibiotic susceptibility test(Table 2) 1) All of the tested antibiotics had antimicrobial activity with various degrees. 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Erythromycin($37.87mm{\pm}2.20$) was largest, those to Tetracycline($26.20mm{\pm}2.96$), Vancomycin($21.53mm{\pm}1.96$), Clindamycin($18.73mm{\pm}0.96$) was smaller than former orderly, and That to Ampicillin ($7.87mm{\pm}0.83$) was smallest. 3) In Actinomyces viscosus, the diameter of inhibition zone to Erythromycin($28.73mm{\pm}1.22$) was largest, those to Ampicillin($21.73mm{\pm}1.03$), Clindamycin($21.33mm{\pm}1.59$) was similarly next order, that to Vancomycin($19.00mm{\pm}1.96$) was smaller than Clindamycin, and that to Tetracycline($11.93mm{\pm}0.70$) was smallest. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Ampicillin($31.07mm{\pm}1.91$) was largest, that to Erythromycin($28.87mm{\pm}0.92$), Clindamycin($20.47mm{\pm}1.51$), Vancomycin ($16.73mm{\pm}0.96$), Tetracycline ($12.13mm{\pm}1.06$) are smaller than former orderly. 2. The results of root canal cements and pastes(Table 3) 1) The external diameter of tube is 4mm, so 4mm of the inhibition zone diameter means non-susceptable. Prevotella intermedia (old Bacteroides intermedius) was non-susceptable to Calcium hydroxide powder+D.D.W., Calcium hydroxide paste(pulpdent Tempcanal), and Actinomyces viscosus was non-susceptable to Zinc phosphate cement, Calcium hydroxide powder + D.D.W., Calcium hydroxide paste(pulpdent Tempcanal). 2) In Prevotella intermedia (old Bacteroides intermedius), the diameter of inhibition zone to Zinc oxide eugenol cement($13.67mm{\pm}3.30$) was largest, that to Vitapex($9.20mm{\pm}2.96$), Zinc phosphate cement($6.13mm{\pm}2.07$) was smaller than former. 3) In Actinomyces viscosus, the diameter of inhibition zone to Zinc oxide eugenol cement($17.40mm{\pm}5.20$) was largest and that to Vitapex($8.80mm{\pm}1.70$) was next order. 4) In Fusobacterium nucleatum, the diameter of inhibition zone to Vitapex($42.33mm{\pm}17.2$) was largest and those to Calcium hydroxide paste(Pulpdent Tempcanal)($14.47mm{\pm}3.72$) and Zinc oxide eugenol cement($8.93mm{\pm}2.71$), Zinc phosphate cement($8.20mm{\pm}2.27$), Calcium hydroxide powder+D.D.W.($5.53mm{\pm}2.10$)was next orderly. And then In Zinc oxide eugenol cement and Zinc phosphate cement group, two of fifteen samples showed no inhibition zone, in Calcium hydroxide powder + D.D.W. group, 8 of 15 samples showed no inhibition zone.

  • PDF

비파괴검사 장치 내 방사선원 위치감시용 섬광필름의 발광성능 평가 (Evaluation of luminance performance of scintillating film for monitoring the position of a radioactive source in an NDT apparatus)

  • 이경진;윤정익;박병기;김신;이봉수
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제28권1호
    • /
    • pp.13-17
    • /
    • 2005
  • 최근 비파괴검사 현장에서 검사 중 검사장치 내 방사선원의 위치를 확인하지 못하여 방사선 과피폭 사고가 종종 발생하고 있다. 본 연구는 방사선원의 노출여부나 위치 미인지로 인한 방사선 사고를 예방하기 위해 방사선원위치를 감시할 수 있는 섬광필름을 개발하는데 있다. 섬광필름은 방사선 비파괴 검사 장비의 가이드튜브 내에 존재하는 선원의 위치를 육안으로 탐지할 수 있는 신소재이다. 연구를 통해 섬광필름의 발광성능을 평가하고 최적의 필름 설계를 꾀하였다. 필름에 적용된 발광물질은 무기 섬광체를 이용하였고, 다양한 층을 갖는 형태의 필름을 제작하여 성능을 평가하였다. 필름의 발광성능은 광도계를 이용하여 측정하였고, 비파괴 검사장비는 Ir-192 감마선 조사기를 사용하였다. 실험결과, 섬광필름의 발광은 육안으로 선원의 위치를 감시할 수 있었으며, 선원의 이동에 따라서 발광영역도 동시에 이동하면서 형성되었다. 또한, 섬광필름에 반사층을 두는 것은 광 이용률의 증대시켜 발광성능을 높이는 데 매우 효과적이었다. 섬광체와 분산용제의 혼합비에 따라서도 성능변화가 나타났으며, 일반적으로 섬광체의 양이 높을수록 발광성능은 높게 나타났다. 그러나 분산 특성이 변화로 혼합비는 일정 농도 이하로 제한되었다. 섬광체 중에서는 $Gd_2O_2S(Tb)$ 무기섬광체가 가장 높은 발광성능을 보여주었다. 개발된 섬광필름을 비파괴 검사 장비에 적용하게 된다면 방사선종사자에게 보다 안전한 작업환경을 제공할 수 있을 것이다.

  • PDF

3D 프린팅 재료를 이용한 X-선 부가 여과 시 광자 스펙트럼에 대한 분석 (Analysis of Photon Spectrum for the use of Added Filters using 3D Printing Materials)

  • 조용인;이상호
    • 한국방사선학회논문지
    • /
    • 제16권1호
    • /
    • pp.15-23
    • /
    • 2022
  • 3D 프린팅 기술은 의료, 바이오 등 다양한 분야에서 활용되고 있으며, 최근 소재 개발을 통해 금속 분말이 함유된 물질 등이 상용화되고 있다. 이에 본 연구에서는 모의실험을 통해 진단 X-선 검사 시 3D 프린팅 재료를 이용한 부가 여과 시 광자 스펙트럼을 분석하고자 한다. 몬테카를로 기법 중 MCNPX(ver. 2.5.0)를 이용하였으며, 첫 번째, 진단 분야에서의 X-선 스펙트럼 생성 프로그램인 SRS-78, SpekCalc를 통해 모의실험 내 발생된 광자 스펙트럼에 대한 적정성을 평가하였다. 두 번째, 금속분말이 함유된 3D 프린팅 재료에 대한 특성 평가를 위해 기존 Al, Cu 필터와 동일한 두께 내 광자 스펙트럼을 획득하였으며, 관전압 변화에 따른 광자 플루언스 및 평균 에너지 등을 비교 분석하였다. 그 결과, 동일한 여과 정도를 나타내기 위해 PLA-Al는 기존 Al 필터 대비 약 1.2 ~ 1.4배, PLA-Cu는 Cu 필터 대비 1.4 ~ 1.7배 정도의 두께가 필요한 것으로 분석되었다. 향후 본 연구를 토대로 의료분야 내 3D 프린팅 부가 필터 제작을 위한 기초 자료로서 활용될 수 있으리라 판단된다.

K+-β/β"-Al2O3의 고온 상관계와 소결성 분석 (Analysis of the Phase Formation and the Sinterability of K+-β/β"-Al2O3 at High Temperatures (≥1600 ℃))

  • 장민호;김승균;김석준;허정림;임성기
    • 공업화학
    • /
    • 제20권3호
    • /
    • pp.317-321
    • /
    • 2009
  • 고체 산화물 전해질로 사용되고 있는 초 이온 전도체인 $K^+-{\beta}/{\beta}"-Al_2O_3$의 고온 상관계와 소결성 분석을 위하여 $K_2O-LiO_2-Al_2O_3$ 삼성분계로부터 고상반응을 통하여 순수한 $K^+-{\beta}/{\beta}"-Al_2O_3$ 분말을 합성한 후 slip casting방법과 냉간정수압성형에 의하여 tube와 disk형을 각각 제작하였다. Slip casting은 40 wt%의 고체함량을 가지는 슬러리를 사용해 알루미나 몰드에서 이루어졌고 냉간정수압성형은 20 MPa의 압력하에서 수행되었다. 성형체들은 $1600^{\circ}C$, $1700^{\circ}C$, $1750^{\circ}C$에서 각각 소결하여 성형방법에 따른 상관계와 소결밀도를 조사하였다. 냉간정수압성형에 의한 시편이 $1700^{\circ}C$까지 ${\beta}"-Al_2O_3$의 상분율이 월등히 높은 반면, 소결밀도에 있어서는 slip casting방법의 경우가 다소 높았다. 소결 시 상대밀도는 $1750^{\circ}C$에서 1 h 경과 후, 두 경우 모두 약 83%를 나타내었다. 90 min 이상 소결하였을 때는 입자의 과대성장과 기공으로 인해 오히려 밀도가 낮아졌다.

Comparison of microstructures in T1-1223/Ag tapes with different chemical compositions and J$_c$'s

  • Jeong, D.Y.;Kim, H.K.;Lee, H.Y.;Cha, M.K.;Ha, H.S.;Oh, S.S.;Tsuruta, T.;Horiuchi, S.
    • 한국초전도학회:학술대회논문집
    • /
    • 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
    • /
    • pp.280-290
    • /
    • 1999
  • The microstructures of a Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.6}Ca_2Cu_3O_{9+{\delta}}$/Ag tape (tape I ) with J$_c$ of 17,600 A/cm$^2$ at 77 K and 0 T and three Tl$_{0.8}Pb_{0.2}Bi_{0.2}Sr_{1.8}Ba_{0.2}Ca_{2.2}Cu_3O_{9+{\delta}}$/Ag tapes with J$_c$'s of 9,300 (tape II), 16,700 (tape III) and 25,200 A/cm$^2$ (tape IV)prepared using the powder-in-tube method and an in-situ reaction method, were investigated using scanning electron microscopy and high-resolution transmission electron microscopy, and compared each other. ln the tape preparation, an intermediate rolling process was incorporated during final heat-treatment for the last tape, but not for the rest of the tapes. The microstructural analysis revealed clear differences in grain-texturing, crystallographic defects and impurity phases, depending on the chemical composition of the tape. Tendency of directional grain-alignment increased in an order of tapes I, II III and IV. In tape IV, T1-1223 grains are textured, at least in local regions. In crystallographic defects, while stacking faults were prevalent in the former composition, dislocations and voids were frequently observed in the latter. Also impurity phases were appeared to be more abundant in the former than in the latter. The relationship between 1,and the microstructure in the tapes was attempted to explain in a term of grain-linking.

  • PDF

다중압출공정을 이용한 알루미나 연속다공질체 제조 및 그의 생체친화성 평가를 위한 In-vitro, In-vivo 실험 (Fabrication of Continuously Porous Alumina Bodies by Multi-Extrusion Process and their In-vitro and In-vivo Study for Biocompatibility)

  • 강인철;조순희;송호연;이병택
    • 한국세라믹학회지
    • /
    • 제41권7호
    • /
    • pp.560-566
    • /
    • 2004
  • 다중 압출 공정을 이용하여 알루미나 연속다공질체를 제조하기 위해 기공형성제로서 탄소 분말을 사용하였으며 세라믹 분말의 성형을 용이하게 하기 위하여 에틸렌 비닐 아세테이트 고분자를 바인더로 사용하였다. 압출 횟수, 압출비 및 재료의 부피비를 제어함으로써 균일한 기공의 크기와 기공률을 용이하게 제어하였다. 제조된 소결체는 연속기공을 가질 뿐아니라 우수한 비표면적을 가졌으며, 기존의 공정에 의해 제조된 알루미나 다공질 재료보다 우수한 곡강도 값을 보였다. 생체 친화성 평가를 위해 인간의 뼈모세포인 MG-63 세포를 이용해 In-vitro 실험을 실시한 결과 기공의 아랫면, 윗면, 내부 및 외부에 세포가 잘 생착하여 네트워크 형태로 치밀하게 잘 성장하였다. 또한 이 재료를 이용하여 3차원 다공질체로 제조한 후 생체적합성을 평가하기 위해 쥐의 피하조직에 이식한 결과 어떠한 염증 소견이나 생체 거부반응이 없었으며 섬유조직으로 잘 둘러 쌓인 다공질체 주위로 새로운 모세혈관이 활발히 생성되었다.

배나무 적성병균의 병자적 성분에 관하여 (Studies on the components in pycnial drops of Gymnosporangium haraeanum Sydow)

  • 이상영;김종진
    • 한국응용곤충학회지
    • /
    • 제7권
    • /
    • pp.61-64
    • /
    • 1969
  • 배나무 적성병균의 병자각세대에 분필하는 병자적 성분중 free sugar를 중심으로 기생엽중의 free sugar와의 상관관계를 생화학적으로 연구 고찰하여 아래와 같은 결과를 얻었다. 1. 병자각세대에 분필하는 병자적 성분중 free sugar를 paper chrmarography로 분석한 결과 fructose만이 확인되었다. 2. 기주 향나무 엽중의 free sugar는 galactose와 glucose 및 미지물질 2종임을 확인하였다. 3. 기주 배나무엽중의 free sugar로는 glucose, fructose 및 galactose를 확인하였다. 4. 배나무엽중의 arbutin-을 결정화하고 그 구조를 일반적인 방법과 paper chromatography로 분석하여 glucose와 hydroquinone의 결합체임을 확인하였다. 5. 0.05M arbutin 용액에 Emulsin을 조제하여 배양한 결과 분해 생성물로서 glucose를 확인하였고 이들 Emulsin은 모두 $\beta-glycosidase$를 함유하고 있음이 확정되었다. 이상 결과에서 보는 바와같이 병자적중의 fructose는 배나무 엽중에 있는 free sugar 및 glycoside인 arbutin이 Emulsin에 의하여 분해되어 glucose로 변화된 다음 균체내의 isomerase에 의하여 isomerization된 것이라 추측된다.

  • PDF

$In_2O_3$계 반도성 가스감지재료의 조성변화에 따른 감도특성 (Sensitivity Characteristics on the Composition Change of the Gas Sensing Materials based on $In_2O_3$ Semiconductor.)

  • 정형진;유광수
    • 한국세라믹학회지
    • /
    • 제22권4호
    • /
    • pp.54-60
    • /
    • 1985
  • Gas sensing materials for detecting flammable gases such as $CH_4$, $C_3H_8$ and n-$C_4H_{10}$ were developed by util-izing $In_2O_3$ as the principal sensing material. The sensing materials were formulated by mixing $In_2O_3$ powder with one or two other chemicals such as $SnO_2$, $Y_2O_3$ and $Al_2O_3$ with a small addition of $PdCl_2$ as a catalyst. Sample of sensor were fabricated by coating each of the mixtures on a ceramic tube impregnating ethylsili-cate and firing at 75$0^{\circ}C$ Each material mixture was evaluated by measuring and comparing gas sensitivity(resistance in air/resistance with gas) to flammable gases such as $CH_4$, $C_3H-8$ and n-$C_4H_{10}$. It was found that among fifteen compositions tested three compositions as follows show the highest gas sensitivity and thus are very feasible for commercialization as the gas sensors ; o49.5 $In_2O_3$+50 Al2O3_0.5 PdCl2(wt%) o $20In_2O_3+29$ $SnO_2+50$ $Al_2O_3+1$ $PdCl_2$(wt%) o40 $In_2O_3$+9 $Y_2O_3+50$ $Al_2O_3+1$ $PdCl_2$(wt%)

  • PDF