• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1042-1045
• /
• 2002

We have carried out two-beam interference experiments to form holographic gratings on amorphous $MgF_2$/As-Ge-Se-S multi-layer. In this study, holographic gratings have been formed using He-Ne laser(632.8nm). under different polarization combinations. The diffraction efficiency was obtained by +1st order intensity. The maximum diffraction efficiency of As-Ge-Se-S single layer and $MgF_2$/As-Ge-Se-S multi-layer were 0.8% and 1.4%

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.299-302
• /
• 2000

In this study, we have made the large holographic surface relief gratings on amorphous chalcogenide $As_{40}$$Ge_{10}$$Se_{15}$$S_{35}$ films by two beam interference using a He-Ne laser(632.8nm) light. The film thickness was about 0.6$\mu\textrm{m}$, we could magnify beam size by using beam expander. We made use $90^{\circ}$ holder which was made of reflection mirror and sample. Formed the surface relief structures were investigated using optical microscope. The diffraction efficiency was obtained by measuring +lst order intensity. In addition we investigated grating formation and diffraction efficiency as a function of polarization states which is linear or circular polarization. The results indicate that the grating was formed by linear polarized beam is better clear than that by circular polarized beam.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.77-81
• /
• 2006

We report the performance of a four-element, 11.67 GHz, high-Tc superconducting (HTS) microstrip antenna array with corporate feed network and circular polarization for direct broadcasting satellite (DBS) system. Our array antennas were designed and built on a 0.5 mm thick MgO substrate. To compare the superconducting antennas with normal conducting counterpart, One antenna pattern was fabricated from gold thin film, and a second pattern was fabricated from $YBa_2Cu_3O_{7-x}$ (YBCO) superconducting thin film. To improve the axial ratio of circularly polarized arrays, sequential rotation technique were used. Efficiency, radiation pattern, return loss and bandwidth were measured for both antennas at room temperature and at cryogenic temperature. The array produced good circular polarization, and the gain of the array at 77 K, relative to a copper array at room temperature was approximately 1.54 dB. The measured return loss of our HTS antenna array was 35.79 dB at the resonant frequency of 11.67 GHz and The total effective bandwidth was about 3.4 %. The results showed that high-temperature superconductors, when used in microstrip arrays, improved the efficiency of the HTS antenna array for circularly polarization.

• Korean Journal of Optics and Photonics
• /
• v.33 no.1
• /
• pp.22-27
• /
• 2022

We fabricate a polarization-independent dielectric multilayer thin-film diffraction grating for a spectral-beam-combining (SBC) system with a simple grating structure and low aspect ratio. Due to the refractive index and thickness error of the manufactured thin films, the diffraction efficiency of the fabricated diffraction grating was lower than that of the design. The causes of the errors were analyzed, and it was confirmed through simulation that diffraction efficiency could be compensated through an additional coating on the manufactured diffraction grating. As a result of sputtering an additional Ta₂O₅ layer on a fabricated diffraction grating, the diffraction efficiency was corrected and a maximum 91.7% of polarization-independent diffraction efficiency was obtained.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.53-57
• /
• 2013

A polarization selective blazed grating employing metal-slit arrays was proposed. Nano-scale metal-slits were applied to the micro-scale blazed grating to give the functionality of polarization selection. Case study was carried out for the proposed structure utilizing numerical FDTD (Finite Difference Time Domain method) simulation. Diffraction efficiency of 77.61% and polarization extinction ratio of 8.99 was achieved with arbitrary parameters and diffraction efficiency of 64.22% and polarization extinction ratio of 81.09 was achieved with other parameters to enhance extinction ratio.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.127-130
• /
• 2003

We have carried out two-beam interference experiment to form holographic grating on amorphous $As_{40}Ge_{10}Se_{15}S_{35}$ single-laver, $MgF_{2}/As_{40}Ge_{10}Se_{15}S_{35}$ muliti-layer. In this study holographic grating formed using He-Ne laser(632.8nm) under different polarization state(intensity, phase polarization holography). The diffraction efficiency was obtained by first order intensity. The maximum diffraction efficiency of $As_{40}Ge_{10}Se_{15}S_{35}$ single-laver was 0.8% and The maximum diffraction efficiency of $MgF_{2}/As_{40}Ge_{10}Se_{15}S_{35}$ multi-layer(multi-layer I, multi-layer II) were 1.4% and 3.1%.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.747-756
• /
• 1999

In this paper, we analyzed microwave-DC conversion efficiency for the dual-polarization rectenna and antenna position changing. And then we analyzed and applied Square-Loop FSS structure for reducing the diode harmonic components as a rectifying circuit. The results of microwave-DC conversion efficiency for the each of designed dual-polarization rectenna has 69.1% with $360\Omega$ (dipole type) and 75.4% with $340\Omega$ (patch type) optimum load resistor. When the each of dual-polarization rectenna has a optimal load resistor, it's conversion efficiency shows of $\pm$20% in dipole type and $\pm$5% in patch type at $0~180^{\circ}$position. When applied Square-Loop FSS structure for Rectenna, Insertion loss was under 1 dB as the passband and over 20 dB as the stopband. The microwave -DC conversion efficiency was represented good properties of $\pm$2% variation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.133-136
• /
• 2001

In this paper, we investigated the diffraction efficiency of polarization holography using by amorphous $Ag/As_{40}Ge_{10}Se_{15}S_{35}$ multi-layer thin films by He-Ne laser. Multi-layer structures were formed by alternating a layer of meta1(Ag) and chalcogenide( $Ag/As_{40}Ge_{10}Se_{15}S_{35}$ ). The holographic grating in these thin flims has been formed using a linealy polarized He-Ne laser light (633nm). The diffraction efficiency was investigated the two sample of $Ag/As_{40}Ge_{10}Se_{15}S_{35}-7$ layers and $Ag/As_{40}Ge_{10}Se_{15}S_{35}-15$ layers. As the results, we found that the diffraction efficiency of $Ag/As_{40}Ge_{10}Se_{15}S_{35}-7$ layers and $Ag/As_{40}Ge_{10}Se_{15}S_{35}-15$ layers were 1.7% and 2.5% respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.133-136
• /
• 2001

In this paper, we investigated the diffraction efficiency of polarization holography using by amorphous Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/ multi-layer thin films by He-Ne laser. Multi-layer structures were formed by alternating a layer of metal(Ag) and chalcogenide(As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/). The holographic grating in these thin films has been formed using a lineally polarized He-Ne laser light (633nm). The diffraction efficiency was investigated the two sample of Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-7 layers and Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-15 layers. As the results, we found that the diffraction efficiency of Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-7 layers and Ag/As$\sub$40/Ge$\sub$10/Se$\sub$15/S$\sub$35/-15 layers were 1.7% and 2.5% respectively

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.387-394
• /
• 2019

Membrane distillation (MD) is one of the water treatment processes which involves the momentum, heat and mass transfer through channels and membrane. In this study, CFD modeling has been used to simulate the heat and mass transfer in the direct contact membrane distillation (DCMD). Also, the effect of operating parameters on the water flux is investigated. The result shows a good agreement with the experimental result. Results indicated that, while feed temperature is increasing in the feed side, water flux improves in the permeate side. Since higher velocity leads to the higher mixing and turbulence in the feed channel, water flux rises due to this increase in the feed velocity. Moreover, results revealed that temperature polarization coefficient is rising as flow rate (velocity) increases and it is decreasing while the feed temperature increases. Lastly, the thermal efficiency of direct contact membrane distillation is defined, and results confirm that thermal efficiency improves while feed temperature increases. Also, flow rate increment results in enhancement of thermal efficiency.