• 한국주조공학회지
• /
• 제9권4호
• /
• pp.311-319
• /
• 1989

The effects of the alloying elements and cooling rates on the formation of phosphide eutectics of compacted vermicular graphite cast irons containing copper, tin, molybdenum for producing pearlitic matrix, and also containing phosphorus and boron for increasing wear resistance, were investigated. The liquidus phosphide eutectic was found to solidify as a pseudo-binary phosphide eutectic, but with increasing of the cooling rate non-equlibrium phosphide eutectic with needle type carbide could be formed. However, the liquidus phosphide eutectic containing both phosphorus and carbide-forming boron was found to solidify always as a non-equlibrium phosphide eutectic with coarse carbide, independent from the cooling rate. It was also confirmed that the tiny isolated phase observed by SEM was gamma iron solid solution with phosphorus, silicon, molybdenum and the matrix containing these tiny islands was phosphide phase containing manganese and molybdenum. The addition of copper was found to decrease the tendency of forming ledeburitic carbides in the phosphide eutectic.

• 대한임상독성학회지
• /
• 제9권2호
• /
• pp.109-112
• /
• 2011

Aluminum phosphide is commonly used as a rodenticidal agent in agricultural workplaces. However, reported cases of aluminum phosphide poisoning in Korea are rare. Upon contact with moisture in the air, aluminum phosphide releases highly toxic phosphine gas ($PH_3$). $PH_3$ is readily absorbed through lung epithelium and into the bloodstream. Phosphine may cause denaturing of oxyhemoglobin and enzymes important to respiration and metabolism, and also may effect cellular membranes. There are numerous complications associated with acute aluminum phosphide poisoning including gastrointestinal, respiratory, and cardiac toxicities. We report the case of a 46-year-old man who suffered from respiratory and cardiac toxicities after unintentional aluminum phosphide exposure. More intensive education for prevention is recommended.

• Applied Science and Convergence Technology
• /
• 제23권5호
• /
• pp.284-288
• /
• 2014

We present tapered nanostructures fabricated on a selective area of gallium phosphide substrates for advanced optoelectronic device applications. A lithography-free fabrication process was accomplished by dry etching of metal nanoparticles. Thermal dewetting of micro-patterned metal thin films provides etch masks for tapered nanostructures. This simple process also allows the formation of plasmonic surfaces with corrugated shapes. Rigorous coupled-wave analysis calculations provide design guidelines for tapered nanostructures on gallium phosphide substrates.

• Journal of Electrochemical Science and Technology
• /
• 제9권1호
• /
• pp.78-83
• /
• 2018

In this study, we investigated the composition of an electrolytic Fe phosphide at different synthesis temperatures. We found that the ratio of Fe in the electrodeposit increases with synthesis temperature, whereas the oxygen content introduced into the electrodeposit by the atmospheric oxidation of Fe decreases. The aim of this study was to identify the reason for this effect. For this purpose, the ratio of Fe and P in the electrodeposits prepared at different temperatures was analyzed in depth. In addition, the types and ratios of Fe phosphide phases were considered. It was proved that with increase in temperature, a significant amount of Fe reacted with P to form Fe phosphide phases, and consequently, the amount of residual pure Fe that would react directly with oxygen decreased.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.27-30
• /
• 2002

Boron Phosphide films were deposited on the glass substrate at the low temperature, $550^{\circ}C$, $480^{\circ}C$, by the reaction of $B_{2}H_{6}$, with $PH_{3}$ using CVD. The reactant gas rates were 50 cc/min and 20 cc/min for $B_{2}H_{6}$, 50 cc/min and 40 cc/min for $PH_{3}$ and $1.5\ell$/min for $N_{2}$ carrier gas. The films were annealed for 1hour, 3hours in $N_{2}$ ambient at $550^{\circ}C$ and $400^{\circ}C$. The deposition rate was $1000{\AA}$/min and the refractive index of film was 2.6. From results of XRD measurement the films have the preferred orientation of (1 0 1). For as deposited the film, the data of VIS spectrophotometer show 75.49%, 76.71% for 1hr-annealed and 86.4% for 3hrs-annealed. From AFM datas the surface condition of obtained films are was shown $73{\AA}$, $88.9{\AA}$ and $220{\AA}$ for as-deposited, for 1hr-annealed and for 3hr annealed, respectively.

• 한국식품과학회지
• /
• 제37권4호
• /
• pp.532-536
• /
• 2005

우리나라에서 사용하는 수입원맥에 잔류하는 알루미늄포스 파이드에 대해 모니터링을 실시하였으며 원맥과 함께 밀가루에 대하여도 포스파인의 잔류량을 모니터링하였다. 묽은 황산과 시료 중의 잔류 포스파인을 반응시켜 발생된 포스파인가스를 GC-NPD를 이용하여 측정하였다. 호주산 밀의 경우 전체 27건의 시료 중 95% 이상이 1 ppb 이하로 검출되었다. 그러나 미국산 밀의 경우 58건중 70% 정도가 1-10ppb 범위에서 검출되었으며, 10ppb가 넘는 시료도 4건이나 되는 등 상대적은 높은 수준의 알루미늄포스파이드 잔류량을 나타내었다. 원료에서 제품으로 포스파인이 이행되는 정도는 14-22%인 것으로 나타났으며 모의실험을 통하여 제분 중에 제거되는 포스파인의 양에는 한계가 있음을 알 수 있었다. 같은 산지의 밀이라도 다양한 농도 범위에서 불규칙한 잔류량을 보이고 있었으며 동일 물량이라 하더라도 포스파인의 잔류량은 균질하지 않음을 확인하여 알루미늄포스파이드제제를 사용하여 훈증소독을 실시할 경우, 훈증방법이나 훈증시간 이외에도 훈증 후의 개방시간, 주위환경 등이 매우 중요함을 알 수 있었다.

• 대한전자공학회논문지
• /
• 제10권3호
• /
• pp.1-9
• /
• 1973

파일롯트 램프와 숫자표시를 목적으로 국내에서 처음으로 화합물반도체인 갈륨 인을 사용해서 발광다이오드를 만들었다. 이같이 만든 다이오드는 밝고 선명한 붉은 빛을 냈으며 발광하는데 필요한 순방향 바이아스 전류는 5mA 이하였다. 다이오드의 p-n 접합면은 n형 GaP 단결정 기판에 liquid phase epitaxy방법으로 성장시켰고 이때의 Ga 용액의 온도는 약 1300°K정도를 유지했다. 이렇게 하여 제조된 p-n 접합체에 wire bonding으로 ohmic contact시켜 다이오드를 제조했다. 칼륨인 발광다이오드는 매우 적은 전류로 발광되는 장점과 성장 반웅시 질소를 불순물로 doping시키면 녹색으로 발광되는 장점을 갖고 있으므로 앞으로 양산화의 전망이 매우 밝다.

• Journal of Electrochemical Science and Technology
• /
• 제11권2호
• /
• pp.155-164
• /
• 2020

Here we report our preliminary results about nickel phosphide (Ni-P) electroless coating on the surface of cellulose paper (CP) and its feasibility as the anode for lithium (Li) batteries. In particular, CP can act as a flexible skeleton to maintain the mechanical structure, and the Ni-P film can play the roles of both the anode substrate and the active material in Li batteries. Ni-P films with different P contents were plated uniformly and compactly on the microfiber strands of CP. When they were tested as the anode for Li battery, their theoretical capacity per physical area was comparable to or higher than hypothetical pure graphite and P film electrodes having the same thickness. After the large irreversible capacity loss in the first charge/discharge process, the samples showed relatively reversible charge/discharge characteristics. All samples showed no separation of the plating layer and no detectable micro-cracks after cycling. When the charge cut-off voltage was adjusted, their capacity retention could be improved significantly. The electrochemical result was just about the same before and after mechanical bending with respect to the overall shape of voltage curve and capacity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.165-166
• /
• 2006

Boron phosphide thin films were prepared on the glass substrate from boron and phosphorous alkoxide precursors by sol-gel processing. Boron phosphide sol with equivalent ratio $(CH_3O_3)B$ : $C_{18}H_{15}P$ = 13 : 2 was selected. Films spin-coated at 4000 rpm for 30 s were coated uniformly. Decomposition and crystallization behavior were examined using DSC/TGA and XRD. The films were sintered at 250, 300 and $400^{\circ}C$. It was determined that crystal structure has a rhombohedral phase. The microstructure of thin film was observed using SEM. Thin films approximately showed a visible ray transmittance of 85 %.

• 식품기술
• /
• 제4권1호
• /
• pp.30-34
• /
• 1991