• KSBB Journal
• /
• v.17 no.3
• /
• pp.311-313
• /
• 2002

Lactobacillus spry. are Gram-positive bacteria playing important roles in human health. In this study, we successfully isolated the total RNA from the cells broken by glass beads using hot phenol method. Moreover, we were able to omit lysozyme and proteinase K treatment by using glass beads to break cell more efficiently. This method was more rapid and simple when compared to the previous one. Prepared RNA can be used for the transcriptional analysis of Lactobacillus spp.

• Journal of Pharmaceutical Investigation
• /
• v.31 no.3
• /
• pp.197-200
• /
• 2001

Lectin-conjugated ellagitannin (LET), a newly introduced melanoma-specific antitumor agent which has been synthesized by conjugation of wheat germ agglutinin as a lectin with praecoxin A as an ellagitannin, was encapsulated into sterically stabilized liposomes (SSL). Modified Folin phenol method was established for the quantitation of LET contents in liposomal formulations protein employing the standard calibration curve with bovine serum albumin. After removal of phospholipid by organic solvent extraction, which interferes the specific selectivity of the Folin-Ciocalteu reagent with the protein, recovery of LET was $94.5{\pm}2.3%$ and the encapsulation efficiency was revealed as $37.8{\pm}5.9%$ for 2.5 mg/ml LET solution.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.33-38
• /
• 2005

It is applied in the high quality equipment construction by introduction of this high duality treating technology (ozone treating, activated carbon treating, high quality oxidation treating, UV treating etc.)waterproofing or corrosion proof method caused secondary economy damage of operation discontinuance and high quality treating equipment for applying existent waterproofing method that corrosion proof ability (ozone resistance performance, chemical resistance etc.) and abrasion resistance performance by comprehension insufficiency of user and designer. Therefor, In this study, we will analyze problem of waterproofing and corrosion material of existing construction application by high quality treating, and measure physical performance change by various condition. It is required to waterproofing and corrosion system and application of the field valuation.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.75-82
• /
• 2007

Washed wastewater generated from the intermittent cleaning process of the three tunnel sites located in the Seoul area showed high concentrations of SS, $COD_{Cr}$, T-N, $NH_3-N$, $NO_3-N$, Zn, Cu, Cr(+6), Mn, Mg, Phenol, $CN^-$ and E-Coli based on the water quality analysis. These characteristics of the deteriorative wastewater depend on the sampling method, cleaning frequency, released amount of washing water, inner material of tunnel wall, traffic volume, and type of drainage systems. Gravitational separation experiment of SS with collected tunnel wastewater showed considerable removal of pollutants such as 80% of $COD_{Cr}$, 30% of T-N and 90% of T-P simultaneously. GAC isotherm test was conducted to remove dissolved portion of the pollutants, and resulted in high removal efficiencies above 80% of $COD_{Cr}$, T-N, Zn, Cu, Mn, Phenol, CN in the experimental condition of GAC dosage of $50g/1/{\ell}$.

• Korean journal of food and cookery science
• /
• v.25 no.4
• /
• pp.496-505
• /
• 2009

The influence of roasting time on antibacterial and antioxidative effects of methanol and water coffee extracts was investigated. Extract yield differed with roasting time. The maximum yield of methanol extract was 20.02% and 24.00% at respective roasting times of 12 and 20 min. The maximum yield of water extracts was 2.70% and 18.58% at 5 and 25 min roasting time, respectively. Antibacterial effects of each extract were determined by the classical minimal inhibitory concentration (MIC) paper disc diffusion method. Methanol extracts of different coffee samples inhibited growth of various strains except Escherichia coli. Extracts obtained following roasting times of 12, 14, 16, 20, and 25 min in particular displayed the most potent activity against Staphylococcus aureus. Among these extracts, that obtained from 12 min roasted coffee samples produced a MIC of $16.125{\mu}g$/mL against S. aureus. Water extracts applied at $1,000{\mu}g$/mL were growth inhibitory except against Salmonella choleraesuis and Prevotella intermedia. However, growth inhibition by water extracts was weak, with inhibitory zones of only 6-8 mm diameter produced. Determinations of free radical elimination for the different coffee extracts using 1,1-diphenyl-2-picrylhydrazyl were compared with ascorbic acid and butylated hydroxytoluene positive controls. Methanol and water extracts of different coffee samples ($100{\mu}g$/mL) showed $67.1{\sim}92.3%$ and $66.4{\sim}93.3%$ radical scavenging activity, respectively. However, longer roasting time (especially >20 min) tended to somewhat lower free radical elimination using both extracts. Total phenol in different coffee samples measured by the Folin-Denis method revealed the highest level of phenol contents with non-roasted coffee, whereas phenol content differed with different roasting time, ranging from $87.{\sim}126.5\;mg/g$ in methanol extracts. In water extracts, the phenol content was maximum at 8 min roasting time, whereas in other samples the content was varied from $95.0{\sim}199.1\;mg/g$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.169-176
• /
• 1989

Volatile flavor components in powdered Katsuobushi were simultaneous trapped by steam distillation-extraction method, and these were fractionated into the neutral, the phenolic, the acidic and the basic fraction. Volatile flavor components in these fraction were analyzed by the high-resolution GC and GC-MS equipped with a fused silica capillary column. The whole steam volatile concentrate consisted of $48\%$ neutral fraction(NF), $35\%$ phenolic fraction(PF), $12\%$ acidic fraction(AF) and $5\%$ basic fraction(BF). Thirty components such as 8 hydrocarbons, 8 aldehydes, 6 furans, 5 alcohols and 3 ketones were identified from NF. And sixteen components such as phenol, guaiacol, dimethoxy phenol, eugenol in PF, twelve components such as propionic, butanoic, isopentanoic, n-hexanoic, heptanoic, octanoic acid in AF, ten components such as 2,6-dimethylpyrazine, 2-nethylpyridine, 2,4-dimethylthiaBole in BF were identified. NF and PF gave a much higher yield than others and were assumed to be indispensable for the reproduction of aroma of powdered Katsuobushi. It was also identified eight components of volatile carbonyl compounds such as ethanal, propanal, butanal, pentanal by 2,4-DNPH method.

• Korean Chemical Engineering Research
• /
• v.48 no.4
• /
• pp.423-427
• /
• 2010

Carbon nano sphere(CNS) and nano bowl of carbon(NBC) containing 1.0 wt% copper were prepared by impregnation method and their catalytic activity was compared in the phenol hydroxylation with hydrogen peroxide in the presence of water and acetonitrile as a solvent, respectively. Cu content of catalysts was determined by EDS, and BET, pore volume, pore size and pore size distribution were compared. For both catalysts, phenol conversion, $H_2O_2$ efficiency and yield of catechol and hydroquinone were higher in the presence of water as a solvent than those in the presence of actonitrile. And catalytic activity such as phenol conversion and $H_2O_2$ efficiency of 1.0 Cu/CNS is about two times higher than that of 1.0 Cu/NBC in water solvent.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.6
• /
• pp.842-851
• /
• 2016

The objective of this study was to improve physical and mechanical properties of soft-inner part of oil palm trunk (S-OPT) after impregnation with phenol formaldehyde (PF) resin and densification by close system compression (CSC) method. Effect of different methods of PF resin impregnation (i.e., no vacuum-pressure, vacuum, and vacuum-pressure) was evaluated. The results showed that PF resin impregnation and CSC significantly improved the physical and mechanical properties of S-OPT up to: (1) 176% in density; (2) 309% in modulus of rupture (MOR); (3) 287% modulus of elasticity (MOE); and (4) 191% in the compressive strength. Physical and mechanical properties of S-OPT showed their best performances when PF resin impregnated with vacuum-pressure method as shown by higher weight gain, density, MOR, MOE, compressive strength, and lower recovery of set due to better penetration of PF resin into S-OPT. Combining PF resin impregnation and densification by CSC method could be a good method to improve physical and mechanical properties of S-OPT.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.118-121
• /
• 2001

The investigation of cure kinetics and morphology studies on DGEBA/PEI/Anhydride system were performed by differential scanning calorimetry and scanning electron microscopy. Autocatalystic kinetics model was applied by isothermal scan test. Ozawa method and Kissinger method was applied by temperature scan. Activation energy was 95kJ/mol for neat DGEBA/NMA, 120kJ/mol for DGEBA/PEI(10p.h.r.)/NMA. The generation of secondary phase of PEI was observed and its size was grown up by increasing contents of PEI.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.146-149
• /
• 2007

The 2-step manufacturing method consisting of preforming and stamping processes was developed to manufacture composite bipolar plates for PEMFCs. The preform was composed of expanded graphite, graphite flake and phenol resin. Precuring conditions were optimized by checking the electrical conductivity, flexural strength and microstructure. Precuring temperature ($100^{\circ}C$) slightly above the melting point of phenol powders ($90^{\circ}C$) induced moderate curing, but also prevented excessive curing. Preforms utilizing the tangled structure of expanded graphite were easily fabricated at low pressure of 0.07-0.28MPa. The proper precuring time, 5min, was determined to fabricate the preform stably because insufficient and excessive precuring deteriorated the flexural strength of composite bipolar plates.