• 전자공학회논문지 IE
• /
• v.48 no.4
• /
• pp.13-18
• /
• 2011

In this paper, we have examined electrical characteristics of LDO regulator according to the process variation using a 1 ${\mu}m$ 20 V high voltage CMOS process. The electrical analysis of LDO regulator have been performed with three kind of SPICE parameter sets (Typ : typical, FF : fast, SS : slow) by process variation which cause change of SPICE parameter such as threshold voltage and effective channel length of MOS devices. From simulation results, we confirmed that in case of SS type SPICE parameter set, the LDO regulator has 3.6 mV/V line regulation, 0.4 mV/mA load regulation and 0.86 ${\mu}s$ output voltage settling time. And in case of Typ type SPICE parameter set, the LDO regulatorhas 4.2 mV/V line regulation, 0.44 mV/mA load regulation and 0.62 ${\mu}s$ output voltage settling time. Finally, in the FF type SPICE parameter set, the LDO regulator has 7.0 mV/V line regulation, 0.56 mV/mA load regulation and 0.27 ${\mu}s$ output voltage settling time.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.129-141
• /
• 2023

Crop models have been used to predict yield under diverse environmental and cultivation conditions, which can be used to support decisions on the management of forage crop. Cultivar parameters are one of required inputs to crop models in order to represent genetic properties for a given forage cultivar. The objectives of this study were to compare calibration and ensemble approaches in order to minimize the uncertainty of crop yield estimates using the SIMPLE crop model. Cultivar parameters were calibrated using Log-likelihood (LL) and Generic Composite Similarity Measure (GCSM) as an objective function for Metropolis-Hastings (MH) algorithm. In total, 20 sets of cultivar parameters were generated for each method. Two types of ensemble approach. First type of ensemble approach was the average of model outputs (E_em), using individual parameters. The second ensemble approach was model output (E_pm) of cultivar parameter obtained by averaging given 20 sets of parameters. Comparison was done for each cultivar and for each error calculation methods. 'Jowoo' and 'Yeongwoo', which are forage rice cultivars used in Korea, were subject to the parameter calibration. Yield data were obtained from experiment fields at Suwon, Jeonju, Naju and I ksan. Data for 2013, 2014 and 2016 were used for parameter calibration. For validation, yield data reported from 2016 to 2018 at Suwon was used. Initial calibration indicated that genetic coefficients obtained by LL were distributed in a narrower range than coefficients obtained by GCSM. A two-sample t-test was performed to compare between different methods of ensemble approaches and no significant difference was found between them. Uncertainty of GCSM can be neutralized by adjusting the acceptance probability. The other ensemble method (E_pm) indicates that the uncertainty can be reduced with less computation using ensemble approach.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.33-40
• /
• 2012

This paper proposes a method to implement biological early warning systems(BEWS). This system generates periodically data event using a monitoring daemon and it extracts the feature parameters from this data sets. The feature parameters are derived with 6 variables, x/y coordinates, distance, absolute distance, angle, and fractal dimension. Specially by using the fractal dimension theory, the proposed algorithm define the input features represent the organism characteristics in non-toxic or toxic environment. And to find a moderate algorithm for learning the extracted feature data, the system uses an extended learning algorithm(UChoo) popularly used in machine learning. And this algorithm includes a learning method with the extended data expression to overcome the BEWS environment which the feature sets added periodically by a monitoring daemon. In this algorithm, decision tree classifier define class distribution information using the weight parameter in the extended data expression. Experimental results show that the proposed BEWS is available for environmental toxicity detection.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.2
• /
• pp.183-190
• /
• 2014

A multiphase pump was developed in this study. The optimum multiphase pump design was arrived at, and the interactions among the different geometric configurations were explained by applying numerical analysis and the DOE (design of experiments) method. First, we designed the base model to meet the specifications. Then, we defined the design parameters related to the meridional plane and the blade angle. Each design parameter was used for generating experiment sets, and numerical analyses were performed on these sets. Finally, the optimized design was selected based on the results of the DOE analysis. The numerical optimization resulted in the optimum model having higher efficiency than the base model. In addition, performance degradation due to changes in the GVF (gas volume fraction) is discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.118-124
• /
• 2007

The efficiency of the hybrid systems which are composed of compound planetary gear sets depend on the amount of the recirculating energy among the motors and battery. This paper studies the analysis of the system efficiency with the parameters, ${\alpha},\;{\beta},\;{\gamma_a},\;{\gamma_b}$ and $\gamma_s$. The efficiency of the systems and the relative torque, speed and power of the power resources are represented by these parameters. The recuperating parameter $\kappa$ which makes the systems generalized is introduced, so the efficiencies of the modes such as the hybrid mode, the engine mode, the motoring mode and the recuperating mode are analyzed with simple equations. The tendency of the system efficiency according to the variations of the $\gamma_s$ and $\kappa$ are studied, by which it can be possible to reduce the loss of the power because the strategies for avoiding the singular speed ratio $\gamma_s$ are helpful for the system efficiency and specific value of $\kappa$ can increase the efficiency of the systems.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.3
• /
• pp.61-66
• /
• 1992

There have been many researches that uses neural network models for automatic speech recognition, but the main trend was finding the neural network models and learning rules appropriate to automatic speech recognition. However, the choice of the input speech parameter for the neural network as well as neural network model itself is a very important factor for the improvement of performance of the automatic speech recognition system using neural network. In this paper we select 6 speech parameters from surveys of the speech recognition papers which uses neural networks, and analyze the performance for the same data and the same neural network model. We use 8 sets of 9 Korean plosives and 18 sets of 8 Korean vowels. We use recurrent neural network and compare the performance of the 6 speech parameters while the number of nodes is constant. The delta cepstrum of linear predictive coefficients showed best result and the recognition rates are 95.1% for the vowels and 100.0% for plosives.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5229-5252
• /
• 2016

With proliferation of diverse network access technologies, users demands are also increasing and service providers are offering a Quality of Service (QoS) to satisfy their customers. In roaming, a mobile node (MN) traverses number of available networks in the heterogeneous wireless networks environment and a single operator is not capable to fulfill the demands of user. It is crucial task for MN for selecting a best network from the list of networks at any time anywhere. A MN undergoes a network selection situation frequently when it is becoming away from the home network. Multiple Attribute Group Decision (MAGD) method will be one of the best ways for selecting target network in heterogeneous wireless networks (4G). MAGD network selection process is predominantly dependent on two steps, i.e., attribute weight, decision maker's (DM's) weight and aggregation of opinion of DMs. This paper proposes Multi-Attribute Intuitionistic Fuzzy Group Decision Method (MAIFGDM) using TOPSIS for the selection of the suitable candidate network. It is scalable and is able to handle any number of networks with large set of attributes. This is a method of lower complexity and is useful for real time applications. It gives more accurate result because it uses Intuitionistic Fuzzy Sets (IFS) with an additional parameter intuitionistic fuzzy index or hesitant degree. MAIFGDM is simulated in MATLAB for its evaluation. A comparative study of MAIFDGM is also made with TOPSIS and Fuzzy-TOPSIS in respect to decision delay. It is observed that MAIFDGM have low values of decision time in comparison to TOPSIS and Fuzzy-TOPSIS methods.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.501-511
• /
• 2016

Predicting potential spatial distribution of Monochamus alternatus, a major insect vector of the pine wilt disease, is essential to the spread of the pine wilt disease. The purpose of this study was to predict future domestic spatial distribution of M. alternatus by using the CLIMEX model considering the temperature condition of the vector's life history. To predict current distribution of M. alternatus, the administrative divisions data where the pine wilt spots caused by M. alternatus were found from 2006 to 2014 and the 10-year mean climate observed data in 68 meteorological stations from 2006 to 2015 were used. Eight parameter sets were chosen based on growth temperature range of M. alternatus reported in preceding researches. Error matrix method was utilized to select and simulate the parameter sets showing the highest correlation with the actual distribution. Regarding the future distribution of M. alternatus, two periods of 2050s(2046-2055) and 2090s(2091-2100) were predicted using the projected climate data of RCP 8.5 Scenario generated from Korea Meteorological Administration. Overall results of M. alternatus distribution simulation were fit in the actual distribution; however, overestimation in Seoul Metropolitan area and Chungnam Region were shown. Gradual expansion of M. alternatus would be expected to nationwide from western and southern coastal areas of Korea peninsula.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1235-1243
• /
• 2021

Geostationary Ocean Color Imager 2 (GOCI-II) on Geo-KOMPSAT-2 (GK2B)satellite was developed as a mission successor of GOCI on COMS which had been operated for around 10 years since launch in 2010 to observe and monitor ocean color around Korean peninsula. GOCI-II on GK2B was successfully launched in February of 2020 to continue for detection, monitoring, quantification, and prediction of short/long term changes of coastal ocean environment for marine science research and application purpose. GOCI-II had already finished IAC and IOT including early in-orbit calibration and had been handed over to NOSC (National Ocean Satellite Center) in KHOA (Korea Hydrographic and Oceanographic Agency). Radiometric calibration was periodically conducted using on-board solar calibration system in GOCI-II. The final calibrated gain and offset were applied and validated during IOT. And three video parameter sets for one day and 12 video parameter sets for a year was selected and transferred to NOSC for normal operation. Star measurement-based INR (Image Navigation and Registration) navigation filtering and landmark measurement-based image geometric correction were applied to meet the all INR requirements. The GOCI2 INR software was validated through INR IOT. In this paper, status and results of IOT, radiometric calibration and INR of GOCI-II are analysed and described.

• Journal of Broadcast Engineering
• /
• v.23 no.4
• /
• pp.559-573
• /
• 2018

Recently, one of the most actively applied image media in the most fields such as virtual reality (VR) is omni-directional or panorama image. This image is generated by stitching images obtained by various methods. In this process, it takes the most time to extract keypoints necessary for stitching. In this paper, we analyze the parameters involved in the extraction of SIFT keypoints with the aim of reducing the computation time for extracting the most widely used SIFT keypoints. The parameters considered in this paper are the initial standard deviation of the Gaussian kernel used for Gaussian filtering, the number of gaussian difference image sets for extracting local extrema, and the number of octaves. As the SIFT algorithm, the Lowe scheme, the originally proposed one, and the Hess scheme which is a convolution cascade scheme, are considered. First, the effect of each parameter value on the computation time is analyzed, and the effect of each parameter on the stitching performance is analyzed by performing actual stitching experiments. Finally, based on the results of the two analyses, we extract parameter value set that minimize computation time without degrading.