• Journal of Mechanical Science and Technology
• /
• v.20 no.1
• /
• pp.125-132
• /
• 2006

To understand fluid dynamic forces acting on a structure subjected to two-phase flow, it is essential to get detailed information about the characteristics of two-phase flow. Stratified steady and unsteady two-phase flows between two parallel plates have been studied to investigate the general characteristics of the flow related to flow-induced vibration. Based on the spectral collocation method, a numerical approach has been developed for the unsteady two-phase flow. The method is validated by comparing numerical result to analytical one given for a simple harmonic two-phase flow. The flow parameters for the steady two-phase flow, such as void fraction and two-phase frictional multiplier, are evaluated. The dynamic characteristics of the unsteady two-phase flow, including the void fraction effect on the complex unsteady pressure, are illustrated.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.3
• /
• pp.106-112
• /
• 2000

Since the oil crisis, we have been concerned about the energy saving techniques of electric generating systems. As a part of the effort to save energy, automatic electric load sharing device was developed. Usually, ship's electric generating system consists of two or three sets of generator. And, electric generating system is operated as single or parallel operation mode according to the demanded electric power. Therefore, it is important to investigate generators operating mode for the supply of required electric power in the ship in order to decrease the operating cost. So, this paper suggests the method to solve the optimal electric load distribution problem by dynamic programming. And, this thesis indicates that the proposed method is superior to the lagrange multiplier's method in obtaining optimal load distribution solution in the ship's electric generating system.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.773-776
• /
• 2003

This paper presents new hardware implementation of the ECC(Elliptic Curve Cryptography) algorithm that is improved in speed and stability. We proposed new datapath that changed square's position so that we can reduce required number of cycles for addition operation between two points by more than 30%. We used Massey-Omura parallel multiplier adopted Normal basis for fast scalar multiplications. Also the use of the window non-adjacent form (WNAF) method can reduce addition operation of each other different points. We implemented ECC system with GF($2^{196}$), and this system was designed and verified by VHDL.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.6
• /
• pp.313-319
• /
• 2019

Finite field operations have played an important role in error correcting codes and cryptosystems. Recently, the necessity of efficient computation processing is increasing for security in cyber physics systems. Therefore, efficient implementation of finite field arithmetics is more urgently needed. These operations include addition, multiplication, division and inversion. Addition is very simple and can be implemented with XOR operation. The others are somewhat more complicated than addition. Among these operations, multiplication is the most important, since time-consuming operations, such as exponentiation, division, and computing multiplicative inverse, can be performed through iterative multiplications. In this paper, we propose a multiplexer based parallel computation algorithm that performs Montgomery multiplication over finite field using redundant basis. Then we propose an efficient multiplexer based semi-systolic multiplier over finite field using redundant basis. The proposed multiplier has less area-time (AT) complexity than related multipliers. In detail, the AT complexity of the proposed multiplier is improved by approximately 19% and 65% compared to the multipliers of Kim-Han and Choi-Lee, respectively. Therefore, our multiplier is suitable for VLSI implementation and can be easily applied as the basic building block for various applications.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.25-37
• /
• 1996

To process computer graphics in real time, the high-speed operations(multiplier and adder) are needed to increase the speed of graphic process. RNS(Residue Number System) is integer number system that has the parallel and high-speed operation. Also, it is able to design both high-speed multiplier and adder, since a cyclic group has an isomorphic relation between multiplication and addition in RNS. So in this paper, DRNS(Double Residue Number System) is proposed, it is used for the multiplier and the adder, which are designed using a circulative code for the high-speed graphic processor in RNS. The designed multiplier would operate with the speed of 87Mzz two TTL using 74s09 and 74s32.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.17 no.4
• /
• pp.97-102
• /
• 2007

In this paper, a new architecture for fast-serial $GF(2^m)$ multiplier with low hardware complexity is proposed. The fast-serial multiplier operates standard basis of $GF(2^m)$ and is faster than bit serial ones but with lower area complexity than bit parallel ones. The most significant feature of the fast-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But The traditional fast-serial architecture needs extra (t-1)m registers for achieving the t times speed. In this paper a new fast-serial multiplier without increasing the number of registers is presented.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 1996.11a
• /
• pp.165-174
• /
• 1996

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.246-248
• /
• 1985

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.2
• /
• pp.29-35
• /
• 1998

This paper describes architectures and design of a SIMD type parallel image processing chip called SliM-II. The chiphas a linear array of 64 processing elements (PEs), operates at 30 MHz in the worst case simulation and gives at least 1.92 GIPS. In contrast to existing array processors, such as IMAP, MGAP-2, VIP, etc., each PE has a multiplier that is quite effective for convolution, template matching, etc. The instruction set can execute an ALU operation, data I/O, and inter-PE communication simulataneously in a single instruction cycle. In addition, during the ALU/multiplier operation, SliM-II provides parallel move between the register file and on-chip memory as in DSP chips, SliM-II can greatly reduce the inter-PE communication overhead, due to the idea a sliding, which is a technique of overlapping inter-PE communication with computation. Moreover, the bandwidth of data I/O and inter-PE communication increases due to bit-parallel data paths. We used the COMPASS$^{TM}$ 3.3 V 0.6.$\mu$m standrd cell library (v8r4.10). The total number of transistors is about 1.5 muillions, the core size is 13.2 * 13.0 mm$^{2}$ and the package type is 208 pin PQ2 (Power Quad 2). The performance evaluation shows that, compared to a existing array processors, a proposed architeture gives a significant improvement for algorithms requiring multiplications.s.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.3
• /
• pp.1-10
• /
• 2012

A low-complexity Multiplication over GF(2m) and multiplier circuit has been proposed by using cyclic-shift coefficients and the irreducible trinomial. The proposed circuit has the parallel input/output architecture and shows the lower-complexity than others with the characteristics of the cyclic-shift coefficients and the irreducible trinomial modular computation. The proposed multiplier is composed of $2m^2$ 2-input AND gates and m (m+2) 2-input XOR gates without the memories and switches. And the minimum propagation delay is $T_A+(2+{\lceil}log_2m{\rceil})T_X$. The Proposed circuit architecture is well suited to VLSI implementation because it is simple, regular and modular.