• Journal of IKEEE
• /
• v.5 no.2 s.9
• /
• pp.128-135
• /
• 2001

Optical wavelength filters based on directional couplers are rigorously designed and analyzed by Modal Transmission-Line Theory (MTLT). The conventional parallel directional coupler is utilized to implement a narrow-band filter, and it takes up the coupler with tapered structure as a wide-band filter. The power transfers of TE/TM modes in narrow-band filters are maximized at ${\lambda}=1.303{\mu}m\;and\;1.1496{\mu}m$, and the optical bandwidths are then 30nm and 10nm, respectively. Furthermore, when the coupling lengths of TE/TM modes in wide-band filters operating at ${\lambda}=1.55{\mu}m$ are selected as $183{\mu}m\;and\;178{\mu}m$, those are operated as the stop-band and pass-band filters, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.2
• /
• pp.323-329
• /
• 2002

This paper describes an efficient error-compensation technique for designing a low-error truncated Booth multiplier which produces an N-bit output from a two's complement multiplication of two N bit inputs by eliminating the N least-significant bits. Applying the proposed method, a truncated Booth multiplier for area-efficient and low-power applications has been designed, and its performance(truncation error, area) was analyzed. Since the truncated Booth multiplier does not have about half the partial product generators and adders, it results an area reduction of about 35％, compared with no-truncated parallel multipliers. Error analysis shows that the proposed approach reduces the average truncation error by approximately 60％, compared with conventional methods. A 16-b$\times$16-b truncated Booth multiplier core is designed on full-custom style using 0.35-${\mu}{\textrm}{m}$ CMOS technology. It has 3,000 transistors on an area of 330-${\mu}{\textrm}{m}$$\times$262-${\mu}{\textrm}{m}$ and 20-㎽ power dissipation at 3.3-V supply with 200-MHz operating frequency.

• Journal of information and communication convergence engineering
• /
• v.10 no.2
• /
• pp.187-193
• /
• 2012

A 1 GHz CMOS fast-lock phase-locked loop (PLL) is proposed to support the quick wake-up time of mobile consumer electronic devices. The proposed fast-lock PLL consists of a conventional charge-pump PLL, a frequency-to-digital converter (FDC) to measure the frequency of the input reference clock, and a digital-to-analog converter (DAC) to generate the initial control voltage of a voltage-controlled oscillator (VCO). The initial control voltage of the VCO is driven toward a reference voltage that is determined by the frequency of the input reference clock in the initial mode. For the speedy measurement of the frequency of the reference clock, an FDC with a parallel architecture is proposed, and its architecture is similar to that of a flash analog-to-digital converter. In addition, the frequency-to-voltage converter used in the FDC is designed simply by utilizing current integrators. The circuits for the proposed fast-lock scheme are disabled in the normal operation mode except in the initial mode to reduce the power consumption. The proposed PLL was fabricated by using a 0.18-${\mu}m$ 1-poly 6-metal complementary metal-oxide semiconductor (CMOS) process with a 1.8 V supply. This PLL multiplies the frequency of the reference clock by 10 and generates the four-phase clock. The simulation results show a reduction of up to 40% in the worstcase PLL lock time over the device operating conditions. The root-mean-square (rms) jitter of the proposed PLL was measured as 2.94 ps at 1 GHz. The area and power consumption of the implemented PLL are $400{\times}450{\mu}m^2$ and 6 mW, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2143-2149
• /
• 2012

DVB-S2 employs LDPC codes which approach to the Shannon's limit, since it has characteristics of a good distance, error floor does not appear. Furthermore it is possible to processes full parallel processing. However, it is very difficult to high speed decoding because of a large block size and number of many iterations. This paper present HSS algorithm to reduce the iteration numbers without performance degradation. In the flooding scheme, the decoder waits until all the check-to-variable messages are updated at all parity check nodes before computing the variable metric and updating the variable-to-check messages. The HSS algorithm is to update the variable metric on a check by check basis in the same way as one code draws benefit from the other. Eventually, LDPC decoding speed based on HSS algorithm improved 30% ~50% compared to conventional one without performance degradation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2253-2260
• /
• 2012

In this paper, an efficient hardware architecture is proposed for inverse transform and inverse quantization of H.264/AVC decoder. The previous inverse transform and quantization architecture has a different AC and DC coefficients decoding order. In the proposed architecture, IQ is achieved after IT regardless of the DC or AC coefficients. A common operation unit is also proposed to reduce the computational complexity of inverse quantization. Since division operation is included in the previous architecture, it will generate errors if the processing order is changed. In order to solve the problem, the division operation is achieved after IT to prevent errors in the proposed architecture. The architecture is implemented with 3-stage pipeline and a parallel vertical and horizontal IDCT is also implemented to reduce the operation cycle. As a result of analyzing the proposed ITIQ architecture operation cycle for one macroblock, the proposed one has improved by 45% than the previous one.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.781-788
• /
• 2017

This paper proposes a new algorithm for comparing amplitude between multiple digital input signals and its digital logic architecture. After simultaneously comparing multiple inputs, the proposed algorithm can provide the information of the largest (or smallest) value among them by using a simple digital logic function. The drawback of the method is to increase hardware resource. To overcome this we propose a reuse method of the overlapped logic operation. The proposed method focuses on enhancing the operational clock frequency, in other words decreasing combinational delay time. After implementing the comparing method with HDL (hardware description language), we experiment on it with environment of Cyclone III EP3C40F324A7 FPGA of Altera Inc. In case of 4 input signals, it can increase the operational speed as mush as 1.66 times with 1.20 times the hardware resource. In case of 8, it can also have 2.29 times the clock frequency and 2.15 times the hardware resource.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1143-1149
• /
• 2006

In this paper, the modified iterative decoding algorithm[8] by partitioning check nodes is applied to low-density parity-check(LDPC) codes in IEEE 802.16e standards, which gives us the improvement for convergence speed of decoding. Also, the new method of check node partitioning which is suitable for decoding of the LDPC codes in IEEE 802.16e system is proposed. The improvement of convergence speed in decoding reduces the number of iterations and thus the computational complexity of the decoder. The decoding method by partitioning check nodes can be applied to the LDPC codes whose decoder cannot be implemented in the fully parallel processing as an efficient sequential processing method. The modified iterative decoding method of LDPC codes using the proposed check node partitioning method can be used to implement the practical decoder in the wireless communication systems.

• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.113-120
• /
• 2016

This paper presents a new high-speed SHA-1 pipeline architecture having a computation delay close to the maximum critical path delay of the original SHA-1. The typical SHA-1 pipelines are based on either a hash operation or unfolded hash operations. Their throughputs are greatly enhanced by the parallel processing in the pipeline, but the maximum critical path delay will be increased in comparison with the unfolding of all hash operations in each round. The pipeline stage logics in the proposed SHA-1 has the latency is similar with the result of dividing the maximum threshold delay of a round by the number of iterations. Experimental results show that the proposed SHA-1 pipeline structure is 0.99 and 1.62 at the operating speed ratio according to circuit size, which is superior to the conventional structure. The proposed pipeline architecture is expected to be applicable to various cryptographic and signal processing circuits with iterative operations.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.4
• /
• pp.1-7
• /
• 1999

The demands for the various type of directional coupler, which is for the sampling of the signal levels in mobile communication baseband or transceiver systems, are growing. The proposed dual directional coupler, which has three parallel coupled transmission lines, can provide the dual coupling and good isolation characteristics between the coupling ports. In this paper, the novel analysis method and the design equation of even and odd mode for the dual directional coupler, which is employing the asymmetrically coupled transmission lines, are proposed. Using the proposed method, the dual directional coupler for PCS system has been designed and fabricated. We obtained the desired coupling value and the high directivity of 40dB. Measured results show the validity of this design method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.93-99
• /
• 2004

According to rapid increment of demand for wireless Local Area Network (LAN), the HyperLAN of 5.1-533GHz and 5.725-5.825GHz is newly allocated for wireless LAM in many regions over the world. Also, because most of mobile communication equipments are small, the size of antenna is important factor of effective design. In this paper, the compacted and wide bandwidth antenna is designed for wireless LAN at 5GHz band. Although the structure of U-shaped slot antenna is simple, It has large bandwidth of $10-40\%$. Also, the U-slot antenna has good radiation pattern. However, in general, the size of U-slot antenna is large. Therefore, it is difficult to apply to wireless equipment such as PDA and Notebook. This proposed antenna has a wide bandwidth by U-shaped slot in rectangular patch and is compacted by using two layered dielectric substrates and foam. For the design of U-slot antenna, the Finite Difference Time Domain method is applied. Also, the method of MPI parallel program is used for the enhancement of the analyzing speed of the FDTD method.