• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.183-186
• /
• 2015

Recently, the demand for the safety and the information delivery system in the ship increases. The deployment of the wireless sensor networks instead of using the built-in wired networks or the setup of the new wired networks is more desirable than the deployment of the wired networks in a ship after its final production since it can reduce the cost and the time of the brand new wired networks by deforming some of the internal structure of the ship. In this paper, the shipboard signal propagation measurement system based on the signature sequence-two way slave mode are designed and its measurement data are analysed after measuring the signal propagation characteristics. Consequently, it is expected that the reliable and cost-effective signal measurement system for the deployment of the shipboard wireless networks can be built.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4B
• /
• pp.371-377
• /
• 2011

Users of the Information Age, IT usage patterns of the wired broadband information services and various forms of the same quality wireless multimedia services are required. Changes of these times the next-generation mobile communications (IMT-Advanced) has emerged as the necessity of developing its current voice and packet data communications on the move in the high-speed 100Mbps, 1Gbps in stationary and slow data transmission rates up to fixed-mobile convergence based on needed to provide ubiquitous service platform for the realization of IMT-Advanced is the time for preparation. In particular, 3-5GHz band, focused on mobile communications can be used to secure the necessary frequency band relocated and the existing crosstalk analysis methodology developed for the services rendered, and the frequency of such results to obtain new spectrum for IMT-Advanced for the country to secure the frequency characteristics and IMT-Advanced 3-5GHz band for the radio frequency of the characterization techniques necessary to develop a national wireless communication interference and frequency-based technology acquisition and management skills were identified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.7
• /
• pp.572-580
• /
• 2013

IEEE 802.15.4e is a prospective standard for low latency control application in industries. This paper proposes a framework to evaluate the closed loop IEEE 802.15.4e based WNCS performance. The framework consists of two models: closed loop control system model and network model. The network model focuses on the PHY parameters of wireless link and takes the channel parameters into consideration. The PHY model combining with MAC model gives the control system model the probability of packet loss in a super-frame. In addition, redundancy mechanism is considered in IEEE 802.15.4e to reduce to data frame loss probability. The simulation is implemented in Matlab, PHY model takes the channel parameters from empirical results. Hence our evaluation gives insight into behavior of WNCS in different environments and it provides us a tool to design wireless network to achieve a good performance for control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5B
• /
• pp.243-252
• /
• 2008

In this paper, we propose the next-generation broadband wireless access network architecture, which is based on the wavelength division multiplexing-passive optical network(WDM-PON), and efficient mobility management scheme to support quality-of-service(QoS) of multimedia services in the next-generation wireless network. By adapting WDM-PON technology to wireless access network, the proposed scheme can realize broadband wireless access network. In addition, We utilize newly proposed local channels between optical network units(ONUs) or subnets in order to support the fast and efficient local data and handoff data transmission. We evaluate the performance of the proposed scheme in terms of handoff delay and packet loss thru computer simulation. Thru various computer simulation results, we verified the superior performance of the proposed scheme by comparing with the results of other schemes.

• The KIPS Transactions:PartC
• /
• v.12C no.2 s.98
• /
• pp.235-242
• /
• 2005

As the demands in a wireless network are recently increasing, it is necessary to promote the power efficiency of a wireless terminal, and to reduce the overhead of a network. To resolve such problems, we propose the paging technology and the structure of paging area with the joint access point in HPi (High-speed Portable Internet) network, which is being studied as the domestic next-generation IP packet data network. The application of the paging technology to the HPi network possesses the advantage of reducing the registration cost while a terminal in dormant state moves around, and the reporting cost of the terminal's location by the joint access point. The technology suggested in this paper causes the advantages that it promotes the power efficiency in user's point of view while it reduces the network overhead and makes the easy rearrangement of joint APs according to the changes of users' moving pattern in the network manager's point of view.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.81-89
• /
• 2008

Improved EKF suggests variable path prediction to reduce the event traffic caused by the information sharing among multi-users in networked virtual environment. The three dimensional virtual space is maintained consistently by endless status information exchange among dispersed users, and periodic status transmission brings traffic overhead in network. By using the error between the measured movement trace of dynamic information and the EKF predicted, we propose the method applied to predict the mobile packet of dynamic data which is simultaneously changing. And, the simulation results of DIS dead reckoning algorithms and EKF path prediction is compared here. It followed the specific path and while moving, the proposed method which it proposes predicting with DIS dead reckoning algorithm and to compare to the mobile path of the actual object and it got near it predicts the possibility of knowing it was.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.2113-2119
• /
• 2006

In this paper, we design the r-Sensor protocol for reliable data transmission in the Intelligent Home Service based on the wireless sensor network environment. The r-Sensor protocol improve the reliability of data transmission and node fairness using simple routing algorithm, congestion control, and loss recovery method that minimize the load of relay node. Reposed routing algorithm find out upstream and downstream nodes using the Network Management packet. Meanwhile, loss recovery algorithm uses the Aggregated-Nack. To apply supposed algorithm, the IHS-AMR(Intelligent Home Service - Automatic Meter Reader) and sensor node are designed and implemented in hardware. The IHS-AMR provides remote metering service and also offers home safety service by internetworking with sensor network, mobile phone network and internet.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.510-513
• /
• 2006

Mobile Ad-hoc networks have recently attracted a lot of attention in the research community as well as in industry. Although the previous research mainly focused on various of Ad-hoc in routing we consider, in this paper, how to efficiently support applications such as variable Geocasting basd on Ad-hoc networks. The goal of a geocasting protocol is deliver data packets to a group of nodes that are located within a specified geocasting region. Previous research that support geocast service in mobilie computing based on Ad-hoc have the non-optimization problem of data delivery path, overhead by frequent reconstruction of the geocast tree, and service disruption problem. In this paper, we propose the mobility pattern based geocast technique using variable service range according to the mobility of destination node and resource reservation to solve this problem. The experimental results show that our proposed mechanism has improved performance than previous research.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.538-541
• /
• 2006

Recently researches of P2P media streaming have been actively published, but the research what kind of P2P overlay networks are better to delivering media data has not been attended. This paper designs a P2P streaming media system model. In this system, we constructs a Half-Structure P2P overlay protocol based on node's capability as the infrastructure of streaming application, which utilizes the heterogeneity of the nodes to maintain topology, presents a active contents diffusing algorithm and Two-stage search algorithm, make it possible for nodes in P2P system to collect information according their capacity and reduces the number of forwarding packet compared with flooding. Also, we give an optimal scheme to scheduling media data.

• Journal of KIISE:Information Networking
• /
• v.30 no.4
• /
• pp.520-534
• /
• 2003

In this paper, a performance evaluation model of the Fat-tree Network with the multiple-buffered crossbar switches is proposed and examined. Buffered switch technique is well known to solve the data collision problem of the switch network. The proposed evaluation model is developed by investigating the transfer patterns of data packets in a switch with output-buffers. Two important parameters of the network performance, throughput and delay, are then evaluated. The proposed model takes simple and primitive switch networks, i.e., no flow control and drop packet, to demonstrate analysis procedures clearly. It, however, can not only be applied to any other complicate modern switch networks that have intelligent flow control but also estimate the performance of any size networks with multiple-buffered switches. To validate the proposed analysis model, the simulation is carried out on the various sizes of Fat-tree networks that uses the multiple buffered crossbar switches. Less than 2% differences between analysis and simulation results are observed.