• Proceeding of KASS Symposium
• /
• 2005.05a
• /
• pp.205-212
• /
• 2005

In order for utilization of the concrete filled tubular, It Is necessary to scrutinize interfacial characteristics between heterogeneous materials, and be performed to various analytical studies on the composite structure. In this paper, this analytic study is carried on using ABAQUS Package/ Version 5.8-1, and the variables aye the relations between the coefficient of friction and the contact pressure for analyzing the behavior on the contact surface, through modifying the analytic methods and improving some problems. It is used to subdivided analytical methods in this research which categorize into four regions and can obtain closer effect for the bond behavior. Four categories compose of the chemical bond and mechanical bond legions replaced the full-interaction before yielding, and the pure friction and moving-down regions after yielding.

• Transactions of Materials Processing
• /
• v.4 no.3
• /
• pp.233-244
• /
• 1995

Rolling force in the direct rolling(or twin-roll strip continuous casting) process fo semi-solid material has been computed using rigid-viscoplastic finite element method. Temperature distributions for calculations of rolling force and roll deformation are obtained from thermofluid analysis. Three dimensional roll deformation analysis has also been performed by using commercial package ANSYS. From the results, behavior of metal flow, rolling force and roll deformation have been investigated according to the process conditions of semi-solid direct rolling.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.1
• /
• pp.33-39
• /
• 2003

Interior parts of a vehicle are getting important to reduce interior noise. Therefore, prior analysis of cabin noise related with interior parts are necessary at first design stage. Recently, Statistical Energy Analysis(SEA) has been suggested as a possible way for high frequency range noise analysis of interior parts. The validity of noise analysis with SEA to interior parts has been preyed by comparing with experimental result, and the developed method with SEA has been applied in finding optimized interior parts package.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.70-73
• /
• 2002

Using a simple compression test, the viscosity measurement experiment is carried out with the grain-refined Al-Si alloy(A356). The measured rheological data are expressed with power-law(Ostwald-de Waele) model and using commercial package, MAGMAsoft, coefficients of Ostwald-de Waele model and Carreau-Yasuda model are calculated. To verify the viscosity data, the die is designed to be applicable to the semi-solid die casting of automotive component and filling test is carried out. The filling test and the simulation result are compared and in good agreement. Hereafter, these data are considered to be usefully allied other product in the semi-solid die casting.

• Applied Science and Convergence Technology
• /
• v.23 no.4
• /
• pp.169-178
• /
• 2014

Fluid model based numerical analysis is done to simulate a low damage etch back system for 20 nm scale semiconductor fabrication. Etch back should be done conformally with very high material selectivity. One possible mechanism is three steps: reactive radical generation, adsorption and thermal desorption. In this study, plasma generation and transport steps are analyzed by a commercial plasma modeling software package, CFD-ACE+. Ar + $CF_4$ ICP was used as a model and the effect of reactive gas inlet position was investigated in 2D and 3D. At 200~300 mTorr of gas pressure, separated gas inlet scheme is analyzed to work well and generated higher density of F and $F_2$ radicals in the lower chamber region while suppressing ions reach to the wafer by a double layer conducting barrier.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.614-615
• /
• 2005

The use of plastic substrates enables new applications, such as flexible display devices, and other flexible electronic devices, using low cost, roll-to-roll (R2R) fabrication technologies. One of the limitations of polymeric substrate in these applications is that oxygen and moisture rapidly diffuse through the material and subsequently degrade the electro-optical devices. GE Global Research (GEGR) has developed a plastic substrate technology comprised of a superior high-heat polycarbonate ($LEXAN^{(R)}$) substrate film and a unique transparent coating package that provides the ultrahigh barrier (UHB) to moisture and oxygen,chemical resistance to solvents used in device fabrications, and a high performance transparent conductor. This article describes the coating solutions for polycarbonate ($LEXAN^{(R)}$) films and its compatibility with OLED device fabrication processes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.758-763
• /
• 2006

We has been studied the thin film encapsulation effect for organic light-emitting diodes (OLED). To evaluate the passivation properties of the passivation layer materials, we have carried out the fabrication of green light emitting diodes with ultra violet(UV) light absorbing polymer resin, $SiO_2,\;and\;SiN_x$, respectively. From the measurement results of shrinkage properties according to the exposure time to the atmosphere, we found that $SiN_x$ thin film is the best material for passivation layer. We have investigated the emission efficiency and life time of OLED device using the package structure of $OLED/SiN_x/polymer$ resin/Al/polymer resin. The emission efficiency of this OLED device was 13 lm/W and life time was about 2,000 hours, which reach 95 % of the performance for the OLED encapsulated with metal.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.2
• /
• pp.221-228
• /
• 2012

This paper analyzed twenty-six production-related KPI(Key Performance indicator) factors of business diagnosis, such as personnel, equipment, materials, operations and quality affecting company business competition to 186 small machinery manufacturers in 2010. Also, we explained the concept of Business Positioning and divided research subjects into four Business Positioning Groups formed break-even point ratio & fixed cost ratio to sales and then we compared between the 4 groups using Logistic Regression analysis by SAS statistical software package. The objective of this study is two-fold. The first is to find out production-related KPI factor of superior Business Positioning Group. The second is to suggest improvement ways for small manufacturers in order to get better profitable Business Positioning.

• 연구논문집
• /
• s.28
• /
• pp.39-47
• /
• 1998

Industrial electrostatic precipitation is a very complex process, which involves multiple-way interaction between the electric field, the fluid flow, and the particulate motion. This paper describes a strongly coupled calculation procedure for the rigorous computation of particle dynamics during electrostatic precipitation. The turbulent gas flow and the particle motion under electrostatic forces are calculated by using the commercial computational fluid dynamics (CFD) package FLUENT linked to a finite-volume solver for the electric field and ion charge. Particle charge is determined from both local electrical conditions and the cell residence time which the particle has experienced through its path. Particle charge density and the particle velocity are averaged in a control volume to use Lagrangian information of the particle motion in calculating the gas and electric fields. The turbulent particulate transport and the effects of particulate space charge on the electrical current flow are investigated. The calculated results for poly-dispersed particles are compared with those for mono-dispersed particles, and significant differences are demonstrated.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.2 no.3
• /
• pp.176-187
• /
• 1998

The Dismantlement and Construction of the buildings have the characteristic of floating change with repetition within a Time Schedule which has fixed resources, that is, Manpower, Materials and Equipments, and involve many disaster factors in performing each processes. But as these factors are variable, a work supervisor should be able to understand data analysed distinctive factors of each activities systematically, organizationally, and scientifically, and diagrammatic information media so that he can control any complex and situation beyond forecast. Thus this study is intended to be a barometer of weighing if the existing process schedule has taken security into consideration by making the characteristics of organization and action of Work package per process in a building field with more factors like these into a network system and is intended to minimize construction disasters by systematizing this into a Transformational Network.