• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.185-190
• /
• 2016

A 70-${\AA}$ nanowire field-effect transistor (FET) for sub-10-nm CMOS technology is designed and simulated in order to investigate the impact of an oxide trap on random telegraph noise (RTN) in the device. It is observed that the drain current fluctuation (${\Delta}I_D/I_D$) increases up to a maximum of 78 % due to the single electron trapping. In addition, the effect of various trap positions on the RTN in the nanowire FET is thoroughly analyzed at various drain and gate voltages. As the drain voltage increases, the peak point for the ${\Delta}I_D/I_D$ shifts toward the source side. The distortion in the electron carrier density and the conduction band energy when the trap is filled with an electron at various positions in the device supports these results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.81-82
• /
• 2006

SOI(Silicon-On-Insulator) MOSFET의 전기적 특성에 미치는 게이트 산화막과 계면준위 밀도의 관계를 조사하였다. 결함이 발생하지 않는 얕은 소스/드레인 접합을 형성하기 위하여 급속열처리를 이용한 고상확산방법으로 제작한 SOI MOSFET 소자는 급속열처리 과정에서 계면준위가 증가하여 소자의 특성이 열화된다. 이를 개선하기 위하여 $H_2/N_2$ 분위기에서 후속 열처리 공정을 함으로써 소자의 특성이 향상됨을 볼 수 있었다. 이와같이 급속열처리 공정과 $H_2/H_2$ 분위기에서의 후속 열처리 공정이 소자 특성에 미치는 영향을 분석하기 위하여 소자 시뮬레이션을 이용하여 게이트 산화막과 채널 사이의 계면준위 밀도를 분석하였다. 그 결과, n-MOSFET의 경우에는 acceptor-type trap, p-MOSFET의 경우에는 donor-type trap density가 소자특성에 큰 영향을 미치는 것을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1582-1585
• /
• 2009

The effects of bias stress on spin-coated zinc tin oxide (ZTO) transistors are investigated. Applying a positive bias stress results in the displacement of the transfer curves in the positive direction without changing the field effect mobility or the subthreshold behavior. Device instability appears to be a consequence of the charging and discharging of temporal trap states at the interface and in the zinc tin oxide channel region.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.18-23
• /
• 2009

The effect of hydrogen-nitrogen annealing on the interface trap properties of Metal-Oxide-Nitride-Oxide-Silicon (MONOS) capacitors is investigated by analyzing the capacitors' gate leakage current and the interface trap density between the Si and $SiO_2$ layer. MONOS samples annealed at $850^{\circ}C$ for 30 s by rapid thermal annealing (RTA) are treated by additional annealing in a furnace, using annealing eases $N_2$ and 2% hydrogen and 98% nitrogen gas mixture $(N_2-H_2)$ at $450^{\circ}C$ for 30 mins. Among the three samples as-deposited, annealed in $N_2$ and $N_2-H_2$, MONOS sample annealed in an $N_2-H_2$ environment is found to have the lowest increase of interface-trap density from the capacitance-voltage experiments. The leakage current of sample annealed in $N_2-H_2$ is also lower than that of sample annealed in $N_2$.

• Clean Technology
• /
• v.17 no.2
• /
• pp.142-149
• /
• 2011

The adsorption and desorption behaviors of NO and $N_2O$ over two mixed oxide catalysts, AlCoPd (1/1/0.05) and AlCoFe (1/1/2), have been investigated for the lean $NO_x$ trap applications. The catalysts showed good adsorption capabilities for NO and $N_2O$ without needing oxidation step. The adsorption decreased a lot when they are co-adsorbed with oxygen. While NO kept high adsorbability and selectivity with respect to oxygen, those of $N_2O$ decreased sharply. From the TPD results, NO and $N_2O$ are considered to decompose into nitrogen and oxygen in the higher temperature range and the oxygen seems to be strongly attached to the catalysts even at high temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.17-20
• /
• 2001

Nonvolatile semiconductor memory devices with reoxidized nitrided oxide(RONO) gate dielectrics were fabricated, and nitrogen distribution and bonding species which contribute to memory characteristics were analyzed. Also, memory characteristics of devices depending on the anneal temperatures were investigated. The devices were fabricated by retrograde twin well CMOS processes with $0.35{\mu}m$ Nonvolatile semiconductor memory devices with reoxidized nitrided oxide(RONO) gate dielectric were fabricated, and nitrogen distribution and bonding species which contributing memory characteristics were analyzed. Also, memory characteristics of devices according to anneal temperatures were investigated. The devices were fabricated by $0.35{\mu}m$ retrograde twin well CMOS processes. The processes could be simple by in-situ process of nitridation anneal and reoxidation. The nitrogen distribution and bonding state of gate dielectric were investigated by Dynamic Secondary Ion Mass Spectrometry(D-SIMS), Time-of-Flight Secondary Ion Mass Spectrometry(ToF-SIMS), and X-ray Photoelectron Spectroscopy(XPS). Nitrogen concentrations are proportional to nitridation anneal temperatures and the more time was required to form the same reoxidized layer thickness. ToF-SIMS results show that SiON species are detected at the initial oxide interface and $Si_{2}NO$ species near the new $Si-SiO_{2}$ interface that formed after reoxidation. As the anneal temperatures increased, the device showed worse retention and degradation properties. These could be said that nitrogen concentration near initial interface is limited to a certain quantity, so excess nitrogen are redistributed near the $Si-SiO_{2}$ interface and contributed to electron trap generation.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.46-52
• /
• 2024

In this study, we investigated the electrical characteristics of SiC MOSFETs by depositing Si and oxidizing it to form the gate oxide layer. A thin Si layer was deposited approximately 20 nm thick on top of the SiC epi layer, followed by oxidation to form a gate oxide layer of around 55 nm. We compared devices with gate oxide layers produced by oxidizing SiC in terms of interface trap density, on-resistance, and field-effect mobility. The fabricated devices achieved improved interface trap density (~8.18 × 10¹¹ eV^-1cm^-2), field-effect mobility (27.7 cm²/V·s), and on-resistance (12.9 mΩ·cm²).

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.4
• /
• pp.188-191
• /
• 2012

This paper introduces a new method regarding deuterium incorporation in the gate dielectric including deuterium implantation and post-annealing at the back-end-of-the process line. The control device and the deuterium furnace-annealed device were also prepared for comparison with the implanted device. It was observed that deuterium implantation at a light dose of $1{\times}10^{12}-1{\times}10^{14}/cm^2$ at 30 keV reduced hot-carrier injection (HCI) degradation and negative bias temperature instability (NBTI) within our device structure due to the reduction in oxide charge and interface trap. Deuterium implantation provides a possible solution to enhance the bulk and interface reliabilities of the gate oxide under the electrical stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.53-53
• /
• 2009

Charge trap flash memory devices with modified tunneling barriers were fabricated using the tunneling barrier engineering technique. Variable oxide thickness (VARIOT) barrier and CRESTED barrier consisting of thin $SiO_2$ and $Si_3N_4$ dielectric layers were used as engineered tunneling barriers. The VARIOT type tunneling barrier composed of oxide-nitride-oxide (ONO) layers revealed reliable electrical characteristics; long retention time and superior endurance. On the other hand, the CRESTED tunneling barrier composed of nitride-oxide-nitride (NON) layers showed degraded retention and endurance characteristics. It is found that the degradation of NON barrier is associated with the increase of interface state density at tunneling barrier/silicon channel by programming and erasing (P/E) stress.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.354-357
• /
• 2002

Thermally grown gate oxide on 4H-SiC wafer was investigated. The oxide layers were grown at l150$^{\circ}C$ varying the carrier gas and post activation annealing conditions. Capacitance-Voltage(C-V) characteristic curves were obtained and compared using various gate electrode such as Al, Ni and poly-Si. The interface trap density can be reduced by using post oxidation annealing process in Ar atmosphere. All of the samples which were not performed a post oxidation annealing process show negative oxide effective charge. The negative oxide effective charges may come from oxygen radical. After the post oxidation annealing, the oxygen radicals fixed and the effective oxide charge become positive. The effective oxide charge is negative even in the annealed sample when we use poly silicon gate. Poly silicon layer was dope by POCl$_3$ process. The oxide layer may be affected by P ions in poly silicon layer due to the high temperature of the POCl$_3$ doping process.