• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.6
• /
• pp.431-441
• /
• 2020

In this paper, we propose a new method using a feedforward disturbance observer that guarantees stability and robustness about the effects of external disturbance and model uncertainty. The method is consist of a disturbance observer, a feedforward controller, and an overshoot detecting logic. It has an advantage of reducing the excessive overshoot by external disturbance and model uncertainty. Also, it is easy to adjust the control gain due to a simple structure. In order to verify the effectiveness of a new method, simulation results are given for longitudinal model of F-16 aircraft. By reflecting a various of model uncertainties, the stability and the robustness are guaranteed. Finally, the stability and the robustness of the proposed method are verified using root locus plot and bode plot.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.2
• /
• pp.115-120
• /
• 2008

Carrier velocity in the MOSFET channel is the main driving force for improved transistor performance with scaling. We report measurements of the drift velocity of electrons and holes in silicon inversion layers. A technique for extracting effective carrier velocity which is a more accurate extraction method based on the actual inversion charge measurement is used. This method gives more accurate result over the whole range of $V_{ds}$, because it does not assume a linear approximation to obtain the inversion charge and it does not limit the range of applicable $V_{ds}$. For a very short channel length device, the electron velocity overshoot is observed at room temperature in 37 nm MOSFETs while no hole velocity overshoot is observed down to 36 nm. The electron velocity of short channel device was found to be strongly dependent on the longitudinal field.

• Journal of Environmental Impact Assessment
• /
• v.23 no.5
• /
• pp.364-378
• /
• 2014

Ecological Footprint (EF) in Korea has increased steeply over the past 50 years and, thus, the overshoot. It has been known that the main causes of the overshoot are population growth and the increase of the consumption intensity per person. In this study, the EF trend in Korea is analyzed for the past 50 years and it is found the major cause of the rapid increase of EF in Korea is the increase of the consumption intensity per person. Among the sectors of the consumption, Carbon Footprint (CF) from the energy consumption and Grazing Land Footprint and Fishing Grounds Footprint from the protein consumption are the major players for the increase. It is also found that if current trend of the EF per person would be maintained until 2060, EF in Korea would be expected to increase also continuously, despite of the decrease of the population from 2031. Therefore, the direction of the environmental management should be considered for inducing the change of the individual consumption patterns and the behavioral changes.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.313-318
• /
• 2022

The feedback voltage detection structure is proposed to alleviate overshoot and undershoot caused by the removal of the existing external output capacitor. Conventional LDO regulators suffer from overshoot and undershoot caused by imbalances in the power supply voltage. Therefore, the proposed LDO is designed to have a more improved transient response to form a new control path while maintaining only the feedback path of the conventional LDO regulator. A new control path detects overshoot and undershoot events in the output stage. Accordingly, the operation speed of the pass element is improved by charging and discharging the current of the gate node of the pass element. LDO regulators with feedback voltage sensing architecture operate over an input voltage range of 3.3V to 4.5V and have a load current of up to 200mA at an output voltage of 3V. According to the simulation result, when the load current is 200mA, it is 73mV under the undershoot condition and 61mV under the overshoot condition.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.720-725
• /
• 1991

In this thesis, the lead-lag compensator is designed to improve output characteristics of flyback zero voltage switching quasi-resonant converters. The switch and the diode are assumed ideally. And the SMPS is modelled by state equations with four operation modes. And the model for controller design is also achived by using a state space averaging method, which is continuous time average of state variables every period. The lag, the lead and the lead-lag compensator is designed the SMPS respectively. The time domain analysis and the frequency domain analysis are done for each compensated circuit. It is possible increasing the phase margin and improving the transient response by the compensators. The phase lag compensator has small overshoot comparatively. But the bandwidth is narrower than the others, so it has longest settling time. For the phase lead compensator, the response come to steady-state within short period. But the overshoot is the largest due to its large peak gain. Finally, the phase lead-lag compensator has medium characteristics in the overshoot and the settling time.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.2
• /
• pp.1-7
• /
• 2007

Active magnetic bearing has been adopted to support the rotor by electomagnetic force without mechanical contact and lubrication process. A property of the control system for magnetic bearing is improved in accordance with making higher system gain. If the control system has integral part, an excessive overshoot response is shown by making higher integral gain. Therefore, this paper suggests a PID control system in order to eliminate the overshoot at the first stage and improve response characteristics to an impact disturbance at the status of levitation. The control gain was obtained by LQR design method which has the structure of I-PD control system in the state space. The PID control system containing prefilter has the same structure as the I-PD control system. Therefore, the PID control system adopted is able to be tuned by LQR design method. Finally, this paper shows the effect of the prefilter on the active magnetic bearing system through response experiments for levitation responses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.119-126
• /
• 2003

This paper presents an algorithm of automatically finding magnitude of each maintenance index regarding step response characteristic for speed control system of driving roller in rolling process. For speed response data with noise, we distinguished possible cases that the number of maximum values is 2 or more into three separate types. Also, we suggested a way of selecting a candidate for reasonable maximum overshoot in each type and developed a decision algorithm of checking whether a candidate chosen is correct maximum overshoot. In terms of two types of test, we showed that magnitude and position in time axis of maximum overshoot can be found well via such algorithm presented in this paper.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.156-165
• /
• 1997

In the practical control systems, the dynamic range of actuatiors is limited(or saturated) when actuators are driven by sufficiently large signals. This gives rise to a nonlinearity as a result of actuator saturation. For example, the upper limit is imposed on productive capability by available factory space and capital equipment. Other examples of those kinds of actuator saturations are a maximum torque of the actua- ting motors and a throttle position in an aircraft speed control A saturating actuator may lead not only to a large overshoot during start-up and shut-down, but also to deterioration of the performance due to the uncertainties. That is, the speed of response is decreased and, possibly, the system output may not follow the lalrge reference inputs. The large-overshoot may be accompanied by rest wind-up(or called by integra- tor wind-up) which comes from controllers with integral action in saturation operation regions. Eventually, as the overshoot increases, the system has a limit cycle or becomes oscillatorily unstable. Due to these cir- cumstances, many studies are focused on the stability and robustness of the nonlinear systems with satu- rating actuator in the time-domain as well as in the frequency-domain.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.3
• /
• pp.189-197
• /
• 2002

The color stability and purity from OLED is of current interest. Aggregation of dyes alters the device color after fabrication of the devices. Exciplex and electroplex formations have been proposed to explain the aggregate color change. We investigate the possibility of exciplex formation and propose the new electroplex state that can cause the bathochromic shift of the electroluminescence spectrum from the devices with TPD/PBD layers. The photoluminescence maximum of the device was 420nm, and the electroluminescence maximum of the device to became 480nm. The bathochromic shift cannot be attained with photoluminescence study with highly concentrated TPD/PBD mixture. This clearly indicates that the 480nm spectrum of the devices is not resulted from the exciplex formation with TPD and PBD. We observed the overshoot in EL spectrum from the OLEDs. The most intense overshoot was observed at 460nm, which may be due to the aggregates that are formed after the electric field has been removed from the devices.

• Transactions of Materials Processing
• /
• v.10 no.7
• /
• pp.565-572
• /
• 2001

It is well known that a multicomponent $Zr_{4l.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ bulk metallic glass alloy shows good bulk glass forming ability due to its high resistance to crystallization in the undercooled liquid state. DSC and XRD have been performed to confirm the amorphous structure of the master alloy. To investigate the mechanical properties and deformation behavior of the bulk metallic $Zr_{4l.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy, a series of compression tests has been carried out at the temperatures ranging from $351^{\circ}C$ to $461^{\circ}C$at the various initial strain rates from $2{\times}10^4s^1$ to $2{\times}10^2s^1$. Three types of nominal stress-strain curves have been identified such as linear stress-strain relationship meaning fracture at maximum stress, plastic deformation including stress overshoot and steady-state flow, plastic deformation without stress overshoot depending on the strain rate and test temperature. Also DSC analysis for the compressed specimens was carried out to investigate the change of structure, thermal stability and crystallization behavior for the various test conditions.