• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.150-153
• /
• 2019

Larynx cancer is a potentially terminal and severe type of neck and head cancer in which malignant cells start to grow and spread upwards in the larynx, or voice box. Smoking tobacco, drinking hot beverages and drinking alcohol are the main risk factors for these tumors. In this study, we aimed to develop a precise, accurate and rapid chemometrics assisted Raman spectroscopy method for diagnosis of larynx cancer in deparaffinized tissue samples. In the proposed method, samples were deparaffinized and 20 microns of each tissue were located on a coverslip. Both healthy (n = 13) and cancerous tissues (n = 13) were exposed to a Raman laser (785 nm) and excitations were recorded between wavenumbers of $50{\sim}1500cm^{-1}$. An Orthogonal Partial Least Square algorithm was applied to evaluate the Raman spectrum obtained. Sensitivity and specificity of the proposed method is high enough with the aid of Principal Component Analysis (PCA) to test the whole model. Healthy and cancerous tissues were accurately and precisely clustered. A rapid, easy and precise diagnosis algorithm was developed for larynx cancer. By this method, some useful data about differences in biomolecules of each group (phospholipids, amides, tyrosine, phenylalanine collagen etc.) was also obtained from the spectra. It is claimed that the optimized method has a great potential for clustering and separating tumor tissues from healthy ones. This novel, rapid, precise and objective diagnosis method may be an alternative for the conventional methods in literature for diagnosis of larynx cancer.

• Korean Journal of Materials Research
• /
• v.31 no.8
• /
• pp.471-479
• /
• 2021

The electrochemical reaction between lead borate glass frit doped with Sn metal filler and Ni-Cr wire of a J-type resistor during a term of Joule heating is investigated. The fusing behavior in which the Ni-Cr wire is melted is not observed for the control group but measured for the Sn-doped specimen under 30 V and 500 mA. The Sn-doped lead borate glass frit shows a fusing property compared with other metal-doped specimens. Meanwhile, the redox reaction significantly contributes to the fusing behavior due to the release of free electrons of the metal toward the glass. The electrons derived from the glass, which used Joule heat to reach the melting point of Ni-Cr wire, increase with increasing corrosion rate at interface of metal/glass. Finally, the confidence interval is 95 ± 1.95₉ %, and the adjusted regression coefficient, R in the optimal linear graph, is 0.93, reflecting 93% of the data and providing great potential for fusible resistor applications.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.728-735
• /
• 2022

Roofers get exposed to increased risk of knee musculoskeletal disorders (MSDs) at different phases of a sloped shingle installation task. As different phases are associated with different risk levels, this study explored the application of machine learning for automated classification of seven phases in a shingle installation task using knee kinematics and roof slope information. An optical motion capture system was used to collect knee kinematics data from nine subjects who mimicked shingle installation on a slope-adjustable wooden platform. Four features were used in building a phase classification model. They were three knee joint rotation angles (i.e., flexion, abduction-adduction, and internal-external rotation) of the subjects, and the roof slope at which they operated. Three ensemble machine learning algorithms (i.e., random forests, decision trees, and k-nearest neighbors) were used for training and prediction. The simulations indicate that the k-nearest neighbor classifier provided the best performance, with an overall accuracy of 92.62%, demonstrating the considerable potential of machine learning methods in detecting shingle installation phases from workers knee joint rotation and roof slope information. This knowledge, with further investigation, may facilitate knee MSD risk identification among roofers and intervention development.

• Atmosphere
• /
• v.27 no.1
• /
• pp.41-54
• /
• 2017

Organic carbon (OC) and elemental carbon (EC) in $PM_{2.5}$ were measured using Sunset OC/EC Field Analyzer at Seoul Hwangsa Monitoring Center from March to April, 2016. The mean concentrations of OC and EC during the entire period were $4.4{\pm}2.0{\mu}gC\;m^{-3}$ and $1.4{\pm}0.6{\mu}gC\;m^{-3}$, respectively. OC/EC ratio was $3.4{\pm}1.0$. The average concentrations of $PM_{10}$ and $PM_{2.5}$ were $57.4{\pm}25.9$ and $39.7{\pm}19.8{\mu}g\;m^{-3}$, respectively, which were detected by an optical particle counter. The OC and EC peaks were observed in the morning, which were impacted by vehicle emission, however, their diurnal variations were not noticeable. This is determined to be contributed by the long-range transported OC or secondary formation via photochemical reaction by volatile organic compounds at afternoon. A conditional probability function (CPF) model was used to identify the local source of pollution. High concentrations of $PM_{10}$ and $PM_{2.5}$ were observed from the westerly wind, regardless of wind speed. When wind velocity was high, a mixing plume of dust and pollution during long-range transport from China in spring was observed. In contrast, pollution in low wind velocity was from local source, regardless of direction. To know the effect of long-range transport on pollution, a concentration weighted trajectory (CWT) model was analyzed based on a potential source contribution function (PSCF) model in which 75 percentiles high concentration was picked out for CWT analysis. $PM_{10}$, $PM_{2.5}$, OC, and EC were dominantly contributed from China in spring, and EC results were similar in both PSCF and CWT. In conclusion, Seoul air quality in spring was mainly affected by a mixture of local pollution and anthropogenic pollutants originated in China than the Asian dust.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.06a
• /
• pp.3-17
• /
• 2004

Space-borne Earth observation technique is one of the most cost effective and rapidly advancing Earth science research tools today and the potential field and micro-wave radar applications have been leading the discipline. The traditional optical imaging systems including the well known Landsat, NOAA - AVHRR, SPOT, and IKONOS have steadily improved spatial imaging resolution but increasing cloud covers have the major deterrent. The new Earth observation satellites ENVISAT (launched on March 1 2002, specifically for Earth environment observation), ALOS (planned for launching in 2004 - 2005 period and ALOS stands for Advanced Land Observation Satellite), and RADARSAT-II (planned for launching in 2005) all have synthetic aperture radar (SAR) onboard, which all have partial or fully polarimetric imaging capabilities. These new types of polarimetric imaging radars with repeat orbit interferometric capabilities are opening up completely new possibilities in Earth system science research, in addition to the radar altimeter and scatterometer. The main advantage of a SAR system is the all weather imaging capability without Sun light and the newly developed interferometric capabilities, utilizing the phase information in SAR data further extends the observation capabilities of directional surface covers and neotectonic surface displacements. In addition, if one can utilize the newly available multiple frequency polarimetric information, the new generation of space-borne SAR systems is the future research tool for Earth observation and global environmental change monitoring. The potential field strength decreases as a function of the inverse square of the distance between the source and the observation point and geophysicists have traditionally been reluctant to make the potential field observation from any space-borne platforms. However, there have recently been a number of potential field missions such as ASTRID-2, Orsted, CHAMP, GRACE, GOCE. Of course these satellite sensors are most effective for low spatial resolution applications. For similar objects, AMPERE and NPOESS are being planned by the United States and France. The Earth science disciplines which utilize space-borne platforms most are the astronomy and atmospheric science. However in this talk we will focus our discussion on the solid Earth and physical oceanographic applications. The geodynamic applications actively being investigated from various space-borne platforms geological mapping, earthquake and volcano .elated tectonic deformation, generation of p.ecise digital elevation model (DEM), development of multi-temporal differential cross-track SAR interferometry, sea surface wind measurement, tidal flat geomorphology, sea surface wave dynamics, internal waves and high latitude cryogenics including sea ice problems.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.4
• /
• pp.201-208
• /
• 2000

Axial load distribution in model piles was measured by fiber Bragg Grating(FBG) sensor to investigate a possibility of analyzing the load transfer mechanism by Fiber Optic sensor system. Since FBGs of different wave lengths can be multiplexed in an optical fiber, the installation of sensor system and the measurement of strains are relatively simple, compared with consisting strain gages. In this study, FBG sensors and electric strain gages were embedded in the same piles and the distributions of load transfer by two sensor systems were measured. It was observed from the test results that the variations of axial load by both systems showed insignificant difference and that the measurements by FBG were smoother than those by strain gage. Under the environments of laboratory testing, survival rate of embedded FBG system was higher than that of strain gage. Therefore, it was concluded that the use of FBG sensor has a great potential for the measurement of load transfer for pile foundation.

• Nuclear Engineering and Technology
• /
• v.48 no.2
• /
• pp.482-494
• /
• 2016

The Feshbache-Kermane-Koonin (FKK) multi-step direct (MSD) theory of pre-equilibrium reactions has been used to compute the single-step cross-sections for some (p,${\alpha}$) reactions using the knock-on and pick-up reaction mechanisms at two incident proton energies. For the knock-on mechanism, the reaction was assumed to have taken place by the direct ejection of a preformed alpha cluster in a shell-model state of the target. But the reaction was assumed to have taken place by the pick-up of a preformed triton cluster (also bound in a shell-model state of the target core) by the incident proton for the pick-up mechanism. The Yukawa forms of potential were used for the proton-alpha (for the knock-on process) and proton-triton (for the pick-up process) interaction and several parameter sets for the proton and alpha-particle optical potentials. The calculated cross-sections for both mechanisms gave satisfactory fits to the experimental data. Furthermore, it has been shown that some combinations of the calculated distorted wave Born approximation cross-sections for the two reaction mechanisms in the FKK MSD theory are able to give better fits to the experimental data, especially in terms of range of agreement. In addition, the theory has been observed to be valid over a wider range of energy.

• Korean Journal of Agricultural Science
• /
• v.41 no.2
• /
• pp.135-139
• /
• 2014

Pathogenic E. coli associated post-weaning diarrhea (PWD) and edema disease are common diseases in commercially-housed weanling pigs. An enterotoxigenic E. coli (ETEC) oral challenge model has been used to mimic the physiological responses observed in commercial conditions. However, an oral challenge procedure has two major limitations: (1) the ETEC cell density is unknown at the point of oral inoculation, and (2) blending ETEC with traditional TSB (trypticase soy broth) is not palatable and hence decreases acceptability by piglets. Therefore, the purposes of this study were to (1) establish a regression equation that can be used for estimation of ETEC concentration in dilution media using the spectrophotometric measurement of cell density; and (2) examine survival of ETEC after blending either with TSB, sweetener or dextrose. A strain of ETEC (serogroup beta-hemolytic E. coli O149; K91; F4; toxins LT, STa, STb) was grown in TSB for 3.5 hours, centrifuged, the supernatant was discarded, and the ETEC pellet was then blended either with TSB (100 mL), sweetener (60 mL TSB + 40 mL fruit flavored concentrate), or dextrose (50 mL TSB + 50 mL dextrose; 0.5g/mL dextrose). Cell density was measured using the colorimetric method and also plated on a 5% sheep blood agar for counting of ETEC colony forming units at 0, 5, 35, 65 and 125 min after blending. The optical density at 600 nm explained 83% of ETEC colony forming units, indicating that the established linear equation (y= 6E+08x - 4E+07, P<0.004) can be used for robust quantification of ETEC cell density in TSB, sweetener and dextrose media. When ETEC was blended with sweetener and dextrose, survival of ETEC was decreased by 45% and 72% within 5 min post-blending. Therefore, further research is required to find out the suitable medium that has potential to improve palatability without compromising survival of ETEC.

• Nano
• /
• v.13 no.11
• /
• pp.1850126.1-1850126.10
• /
• 2018

Flexible strain sensors, as the core member of the family of smart electronic devices, along with reasonable sensing range and sensitivity plus low cost, have rose a huge consumer market and also immense interests in fundamental studies and technological applications, especially in the field of biomimetic robots movement detection and human health condition monitoring. In this paper, we propose a new flexible strain sensor based on thick CVD graphene film and its low-cost fabrication strategy by using the commercial adhesive tape as flexible substrate. The tensile tests in a strain range of ~30% were implemented, and a gage factor of 30 was achieved under high strain condition. The optical microscopic observation with different strains showed the evolution of cracks in graphene film. Together with commonly used platelet overlap theory and percolation network theory for sensor resistance modeling, we established an overlap destructive resistance model to analyze the sensing mechanism of our devices, which fitted the experimental data very well. The finding of difference of fitting parameters in small and large strain ranges revealed the multiple stage feature of graphene crack evolution. The resistance fallback phenomenon due to the viscoelasticity of flexible substrate was analyzed. Our flexible strain sensor with low cost and simple fabrication process exhibits great potential for commercial applications.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_2
• /
• pp.1529-1539
• /
• 2023

The data from Geostationary Ocean Color Imager-II (GOCI-II), which observes the color of the sea to monitor marine environments, undergoes various correction processes in the ground station system, producing data from Raw to Level-2 (L2). Quality issues arising at each processing stage accumulate step by step, leading to an amplification of errors in the satellite data. To address this, improvements were made to the GOCI-II ground station system to measure potential optical quality and geolocation accuracy errors in the Level-1A/B (L1A/B) data. A newly established Radiometric and Geometric Performance Assessment Module (RGPAM) now measures five optical quality factors and four geolocation accuracy factors in near real-time. Testing with GOCI-II data has shown that RGPAM's functions, including data processing, display and download of measurement results, work well. The performance metrics obtained through RGPAM are expected to serve as foundational data for real-time radiometric correction model enhancements, assessment of L1 data quality consistency, and the development of reprocessing strategies to address identified issues related to the GOCI-II detector's sensitivity degradation.