• 제목/요약/키워드: optical fiber Bragg gratings

검색결과 85건 처리시간 0.021초

위상 마스크 간섭계를 이용한 광섬유 격자 제작 (Fiber Brags Grating Fabrication using Interferometer with Phase Mask)

  • 유계준;이호준;김병규;김선관;이원준
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
    • /
    • pp.194-195
    • /
    • 2001
  • We fabricated fiber bragg gratings using interferometric method with Phase mask. The interferometer consisted of two plane-parallel mirrors and a phase mask perpendicular to mirrors. The Gratings were written using an Argon-ion laser. The experimental setup could change Bragg wavelength given by the phase mask. (omitted)

  • PDF

Uniform-fiber-Bragg-grating-based Fabry-Perot Cavity for Passive-optical-network Fault Monitoring

  • Xuan, Zhang;Ning, Ning;Tianfeng, Yang
    • Current Optics and Photonics
    • /
    • 제7권1호
    • /
    • pp.47-53
    • /
    • 2023
  • We propose a centralized passive-optical-network monitoring scheme using the resonance-spectrum properties of a Fabry-Perot cavity based on fiber Bragg gratings. Each cavity consists of two identical uniform fiber Bragg gratings and a varying cavity length or grating length, which can produce a unique single-mode resonance spectrum for the drop-fiber link. The output spectral properties of each cavity can be easily adjusted by the cavity length or the grating length. The resonance spectrum for each cavity is calculated by the transfer-matrix method. To obtain the peak wavelength of the resonance spectrum more accurately, the effective cavity length is introduced. Each drop fiber with a specific resonance spectrum distinguishes between the peak wavelength or linewidth. We also investigate parameters such as reflectivity and bandwidth, which determine the basic performance of the fiber Bragg grating used, and thus the output-spectrum properties of the Fabry-Perot cavity. The feasibility of the proposed scheme is verified using the Optisystem software for a simplified 1 × 8 passive optical network. The proposed scheme provides a simple, effective solution for passive-optical-network monitoring, especially for a high-density network with small end-user distance difference.

균일한 대역폭을 갖는 광대역 분산 및 분산 경사 보상을 위한 순 위상 샘플링 광섬유 Bragg 격자 (Purely Phase-Sampled Fiber Bragg Gratings with uniform bandwidth for Broadband Dispersion and Dispersion Slope Compensation)

  • 이호준
    • 한국광학회지
    • /
    • 제15권6호
    • /
    • pp.485-489
    • /
    • 2004
  • 색 분산과 색 분산 경사를 보상하기 위하여 결합 계수가 파장 축을 따라 첩 된 순 위상 샘플링 광섬유 Bragg 격자를 제안하였다. 기존의 샘플링 주기의 첩과 결합 계수의 첩을 동시에 이용하여 동일한 파장 다중 채널들의 대역폭들을 얻을 수 있었다.

Protection Method for Diameter-downsized Fiber Bragg Gratings for Highly Sensitive Ultraviolet Light Sensors

  • Seo, Gyeong-Seo;Ahn, Tae-Jung
    • Current Optics and Photonics
    • /
    • 제2권3호
    • /
    • pp.221-225
    • /
    • 2018
  • We suggested the use of miniature hollow glass tubes having high ultraviolet (UV) transmission characteristics for the protection of optical-fiber-type UV sensors. We have recently proposed a highly sensitive optical sensor in the UV spectral range, using a fiber Bragg grating (FBG) coated with an azobenzene polymer as the photoresponsive material. In this study, we used UV-transparent miniature glass tubes to protect the etched FBG with the azobenzene polymer coating. This technique will be very useful for protecting various fiber-based UV sensors.

반사 파장 선폭 확장을 위해 장력 조절기를 적용시킨 광섬유 브래그 격자(Fiber Bragg grating) 제작 기술 (Fabrication of Fiber Bragg gratings using a tension controller for broad wavelength linewidth)

  • 최보훈
    • 한국정보통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.350-356
    • /
    • 2012
  • 가우스 광분포를 가지는 KrF 엑시머 레이저 빔과 위상마스크를 이용하여 광섬유 브래그 격자를 제작하고 제작된 격자의 장력에 대한 특성 변화가 측정되었다. 3 nm 범위 내에서 브래그 파장은 1.24 nm/10kpsi 로 선형적으로 변화하였다. 외부 장력 인가 장치와 광섬유 제작 장치를 결합하여 하나의 위상 마스크로 4 개의 중심 파장이 다른 광섬유 격자를 제작한 뒤 이들을 이용하여 기존의 단일 광섬유 브래그 격자로 얻을 수 있는 파장 선폭보다 2배 증가된 1.5 nm 인 3 dB 대역폭을 갖는 광섬유 브래그 격자를 얻었다.

Hydrogen Sensor Based on Palladium-Attached Fiber Bragg Grating

  • Lee, Sang-Mae;Sirkis, Jim-S.
    • Journal of the Optical Society of Korea
    • /
    • 제3권2호
    • /
    • pp.69-73
    • /
    • 1999
  • This paper demonstrated the performance of a palladium wire hydrogen sensor based on a fiber Bragg grating as a means of developing a quasi-distributed hydrogen sensor network capable of operating at cryogenic temperatures. The new approach employing a fiber Bragg grating based palladium hydrogen sensor described in this study is advantageous over other traditional hydrogen sensors because of the multiplexing capability of fiber Bragg gratings. The sensitivity of the hydrogen sensor at room temperature is approximately 2.5 times that of the hydrogen sensor at cryogenic temperatures.

광섬유 브래그 격자(Fiber Bragg grating) 제작과 제작 조건에 따른 특성 향상 (Fabrication optimization of Fiber Bragg gratings)

  • 최보훈
    • 한국정보통신학회논문지
    • /
    • 제14권7호
    • /
    • pp.1680-1686
    • /
    • 2010
  • 가우스 광분포를 가지는 248nm 파장의 KrF 엑시머 레이저 빔과 1.072um 주기를 가지는 위상마스크를 이용하여 최저 투과율 파장이 1549.9nm 인 광섬유 브래그 격자(Fiber Bragg Grating)를 제작하였다. 레이저 빔과 마스크 그리고 광섬유의 최적 정렬 과정을 조사하기 위해 평행 정렬 오차와 각 정렬 오차가 조사되었고 또한 엑시머 레이저의 투과 에너지와 발진 주파수의 변화에 따른 영향도 조사되었다. 실험 결과 얻어진 최적 정렬 조건 하에서 제작된 광섬유 격자의 광 투과 스펙트럼 형성 과정을 측정하여 특성이 분석되었고 이 같이 사용된 제작 조건의 안정성을 확인하기 위해 재현성 실험이 수행되었다.

Impact of CO2 Laser Pretreatment on the Thermal Endurance of Bragg Gratings

  • Gunawardena, Dinusha Serandi;Lai, Man-Hong;Lim, Kok-Sing;Ahmad, Harith
    • Journal of the Optical Society of Korea
    • /
    • 제20권5호
    • /
    • pp.575-578
    • /
    • 2016
  • The thermal endurance of fiber Bragg gratings (FBGs), written with the aid of 193-nm ArF excimer laser irradiation on H2-loaded Ge/B codoped silica fiber, and pretreated with a CO2 laser and a subsequent slow cooling process, is investigated. These treated gratings show relatively less degradation of grating strength during the thermal annealing procedure. The thermal decay characteristics of treated and untreated fiber, recorded over a time period of 9 hours, have been compared. The effect on the Bragg transmission depth (BTD) and the center-wavelength shift, as well as the growth of refractive-index change during the grating inscription process for both treated and untreated fiber, are analyzed.

금속격지구조의 누설특성을 이용한 새로운 광 결합용 필터 (Novel Optical Coupling Filters using Leaky Characteristics of Metal-Strip Gratings)

  • 호광춘
    • 한국광학회지
    • /
    • 제18권3호
    • /
    • pp.190-195
    • /
    • 2007
  • 광 평면 유전체 기판 위에 형성된 금속격자구조의 누설특성을 이용한 새로운 광 결합용 필터를 제안하였고, Bragg 조건들을 모드 전송선로 이론을 사용하여 정확하게 분석하였다. 수치해석 결과, 유전체격자구조로 구성된 기존의 DFB는 전송 모드들의 피드백특성에 기인한 차단대역을 형성하지만 금속격자구조는 누설파특성에 기인한 차단대역을 형성하는 것으로 나타났다. 결국, 누설파 필터특성을 적용한 광 결합용 필터는 LD나 광섬유와 같은 광통신용 소자들과 집적이 가능함을 보였다.

광섬유 격자소자를 이용한 협대역 투과 필터의 설계 (Design of narrow band-pass filter using two fiber bragg gratings)

  • 임종훈;이경식
    • 전자공학회논문지D
    • /
    • 제35D권8호
    • /
    • pp.82-88
    • /
    • 1998
  • We propose and design a new type of anrrow band-pass optical filter based on two fiber gratings with different reflection wavelength. The ripples occur in the spectra of the filter with two uniform fiber gratings. Our simulation results also show that the ripples disappear with the fiber gratings apodized to both gaussian and hyperbolic tangent function. The hyperbolic tangent function seems to be a better apodization function for improving the filter's performance in terms of narrow pass bandwidth and high transmission.

  • PDF