1 |
S. P. Pappas, UV Curing: Science and Technology, Vol. 2, Technology Marketing Corp. (1985).
|
2 |
B. Srikanth, "Recent advancements in UV technology yield enhanced TOC reduction performance," Ultrapure Water 15, 40-46 (1998).
|
3 |
B. J. Lin, "Deep UV lithography," J. Vacuum Sci. Technol. 12, 1317-1320 (1975).
DOI
|
4 |
A. F. Nichols, T. Itoh, J. A. Graham, W. Liu, M. Yamaizumi, and S. Linn, "Human damage-specific DNA-binding protein p48: Characterization of XPE mutations and regulation following UV irradiation," J. Biol. Chem. 275, 21422-21428 (2000).
DOI
|
5 |
Y. Hu and K. Liu, Inspection and Monitoring Technologies of Transmission Lines with Remote Sensing (Academic Press, 2017), Chapter 4.
|
6 |
J. Kim, "The strength of surface UV radiation over Korea peninsula and the consequent Minimum Erythema Dose (MED) and its exposure time for Korean skin type and reaction," Institute of Earth & Environment Yonsei University, Health Care Technology Research and Development Project Report (2001), p. 3.
|
7 |
C. Cao, C. Hu, X. Wang, S. Wang, Y. Tian, and H. Zhang, "UV sensor based on nanorod arrays on FTO thin film," Sens. Actuators, B 156, 114-119 (2011).
DOI
|
8 |
A. V. Joza, J. S. Bajic, D. Z. Stupar, M. P. Slankamenac, M. Jelic, and M. B. Zivanov, "Simple and low-cost fiber-optic sensor for detection of UV radiation," Telfor J. 4, 133-137 (2012).
|
9 |
Y. Kim, S. Ju, S. Jeong, and W.-T. Han, "Photonic properties of Ti-doped optical fiber," J. Nonlinear Opt. Phys. Mater. 19, 781-790 (2010).
DOI
|
10 |
K. T. Kim, N. I. Moon, and H.-K. Kim, "A fiber-optic UV sensor based on a side-polished single mode fiber covered with Azobenzene dye-doped polycarbonate," Sens. Actuators, A 160, 19-21 (2010).
DOI
|
11 |
A. Othonos and K. Kalli, Fiber Bragg Gratings: Fundamentals and Applications in Telecommunications and Sensing (Artech House Optoelectronics Library, 1999), Chapter 7.
|
12 |
S. R. Oh, D. Kang, J. Choi, J. H. Kim, H. Lee, K-S. Kim, and S. Kim, "Supercontinuum notch shaping via fiber Bragg grating for the excitation source in coherent anti-stokes Raman spectroscopy," in Proc. Conference on Lasers and Electro-Optics/Pacific Rim 2015 (Korea, Aug. 2015), paper 26C3_7.
|
13 |
H.-K. Kim, W. Shin, and T.-J. Ahn, "UV sensor based on photomechanically functional polymer-coated FBG," IEEE Photon. Technol. Lett. 22, 1404-1406 (2010).
DOI
|
14 |
D.-S. Choi, H.-K. Kim, and T.-J. Ahn, "The study of thermal effect suppression and wavelength dependence of azobenzene-coated FBG for UV sensing application," Korean J. Opt. Photon. 22, 67-71 (2011).
DOI
|
15 |
H.-K. Kim, X.-S. Wang, Y. Fujita, A. Sudo, H. Nishida, M. Fujii, and T. Endo, "Reversible photo-mechanical switching behavior of azobenzene-containing semi-interpenetrating network under UV and visible light irradiation," Macromol. Chem. Phys. 206, 2106-2111 (2005).
DOI
|
16 |
W. Y. Kim, C.-Y. Kim, H.-K. Kim, and T.-J. Ahn, "Improving the sensitivity of an ultraviolet optical sensor based on a fiber Bragg grating by coating with a photoresponsive material," Korean J. Opt. Photon. 26, 83-87 (2015).
DOI
|
17 |
S. K. Rastogi, H. E. Anderson, J. Lamas, S. Barret, T. Cantu, S. Zauscher, W. J. Brittain, and T. Betancourt, "Enhanced release of molecules upon ultraviolet (UV) light irradiation from photoresponsive hydrogels prepared from bifunctional azobenzene and four-arm poly (ethylene glycol)," ACS Appl. Mater. Interfaces Article ASAP DOI: 10.1021/acsami.6b16183 (2017).
DOI
|
18 |
I.-S. Song, C.-Y. Kim, H-K. Kim, B.-H. Kim, and T.-J. Ahn, "Sensitivity improvement of UV FBG sensor by downsizing grating diameter," in Proc. SPIE 8924, 892406 (2013).
|
19 |
I.-S. Song, W.-Y. Kim, C.-Y. Kim, B. H. Kim, H.-K. Kim, and T.-J. Ahn, "Sensitivity enhancement of a UV photo-sensor based on a fiber Bragg grating coated by a photomechanical functional polymer," Sens. Actuators, A 232, 223-228 (2015).
DOI
|
20 |
I. H. Malitson, "Interspecimen comparison of the refractive index of fused silica," J. Opt. Soc. Am. 55, 1205-1209 (1965).
DOI
|
21 |
S. O. Kasap, Optoelectronics and Photonics (2nd Edition, Pearson, 2013), Chapter 1, p. 42.
|