• Korea Journal of Hospital Management
• /
• v.18 no.4
• /
• pp.113-130
• /
• 2013

The aim of this article is to propose a framework for standardization of knowledge based on a case study of clinical operation to guide initial hospital knowledge management projects. Both quantitative and qualitative data for the project from 2009 through 2012 were collected for analysis. In a study of knowledge management project of a lab in S Hospital's Eye Center, this research examines the standardization of operational knowledge for competence enhancement of the lab. The lab defined and standardized the knowledge concern of the lab operation and the in-group from 2008. Organizations are often unaware of the potential value of tacit knowledge in both clinical and administrative area. The main finding from the case study is that analysis of such tacit knowledge of a lab in a hospital can be transformed into explicit knowledge for organizational capabilities such as improved quality, responsiveness and competitive advantage. Concepts from Nonaka's theory are used to investigate processes of knowledge standardization, examining the strategic value of tacit knowledge and the need to rely primarily on internal documentation processes. Since there has been limited research on hospital knowledge management. it may also be useful to researchers in generating propositions for further study.

• Smart Structures and Systems
• /
• v.6 no.3
• /
• pp.183-196
• /
• 2010

Monitoring and economical design of alternative energy generators such as wind turbines is becoming increasingly critical; however acquisition of the dynamic output data can be a time-consuming and costly process. In recent years, low-cost wireless sensors have emerged as an enabling technology for structural monitoring applications. In this study, wireless sensor networks are installed in three operational turbines in order to demonstrate their efficacy in this unique operational environment. The objectives of the first installation are to verify that vibrational (acceleration) data can be collected and transmitted within a turbine tower and that it is comparable to data collected using a traditional tethered system. In the second instrumentation, the wireless network includes strain gauges at the base of the structure. Also, data is collected regarding the performance of the wireless communication channels within the tower. In both turbines, collected wireless sensor data is used for off-line, output-only modal analysis of the ambiently (wind) excited turbine towers. The final installation is on a turbine with embedded braking capabilities within the nacelle to generate an "impulse-like" load at the top of the tower. This ability to apply such a load improves the modal analysis results obtained in cases where ambient excitation fails to be sufficiently broad-band or white. The improved loading allows for computation of true mode shapes, a necessary precursor to many conditional monitoring techniques.

• Journal of the Korea Society for Simulation
• /
• v.29 no.2
• /
• pp.63-72
• /
• 2020

Tank, which is a representative ground weapon system, is one of the most important weapon systems in each country. For the cost-effective acquisition of a tank based on scientific analysis, the operational concept and effectiveness should be studied based on engagement simulation technology. Besides physical capabilities including maneuver and communication, logical models including decision-making of a tank commander should be developed systematically. This paper describes a method to model a tank for engagement simulation based on Base System Model(BSM), which is the standard architecture of the weapon system model in AddSIM, an integrated engagement simulation software. In particular, a method is proposed to develop logical models by hierarchical and modular approach based on human decision-making model. The proposed method applies a mathematical formalism called DEVS(Discrete EVent system Specification) formalism. It is expected that the proposed method is widely used to study the operational concept and analyze the effectiveness of tanks in the Korean military in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.167-180
• /
• 2021

Since the mid-1990s, small and medium distribution and retail businesses have been experiencing difficulties due to the active entry of domestic and foreign distribution companies into the distribution industry. Accordingly, in 2003, the government established a small and medium distribution logistics center to secure self-sustainability and strengthen the competitiveness of small and medium distribution and retail businesses. However, in the rapidly changing distribution environment, small and medium distribution logistics centers were becoming increasingly difficult. To strengthen the management capabilities of small and medium distribution logistics centers, 4 primary factors (management operational ability, employee professional competency enhancement, product delivery, customer CS management) and 16 secondary factors were established based on literature research and FGI. We intend to derive the final weight and priority of these factors using AHP, and establish strategies to strengthen the competitiveness of small and medium distribution logistics centers.

• Journal of the Korean Society for Library and Information Science
• /
• v.47 no.1
• /
• pp.377-398
• /
• 2013

The research has provided elementary and junior high school students at Children's Center in Incheon district and analyzed its effective factors in both educational and operational aspects. The educational factors in reading discussion include reading, writing, presenting, listening, and rethinking. In the result, the influential factors are as follows: the respondents' emotional intelligence, the level of reading completion, the level of sympathy with class participants, and the level of advance preference on reading. There are additional factors that have influences on the result, including suitability of topics, capabilities of leaders, selection of books, and combination of basic educational training, like speaking and writing.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.257-268
• /
• 2014

In this study, flow-driven rotor simulations with a given load are conducted to analyze the operational characteristics of a vertical-axis Darrieus turbine, specifically its self-starting capability and fluctuations in its torque as well as the RPM. These characteristics are typically observed in experiments, though they cannot be acquired in simulations with a given tip speed ratio (TSR). First, it is shown that a flow-driven rotor simulation with a two-dimensional (2D) turbine model obtains power coefficients with curves similar to those obtained in a simulation with a given TSR. 3D flow-driven rotor simulations with an optimal geometry then show that a helical-bladed turbine has the following prominent advantages over a straight-bladed turbine of the same size: an improvement of its self-starting capabilities and reduced fluctuations in its torque and RPM curves as well as an increase in its power coefficient from 33% to 42%. Therefore, it is clear that a flow-driven rotor simulation provides more information for the design of a Darrieus turbine than a simulation with a given TSR before experiments.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.5
• /
• pp.331-341
• /
• 2017

This paper presents the sea-trial results of Crabster CR6000 which is a deep-sea walking robot developed by KRISO in 2016. Crabster CR6000 is designed to inspect deep-sea environment rejecting the disturbance on the silent and calm abyssal area. The sea-trial was conducted at the East Sea and the Philippine Sea on December 2016. The Crabster CR6000 undocked successfully from the Shuttle after touchdown on the sea-bed and walked out on the soft sediment soil of the 4,743m seafloor at the fourth diving in the Philippine Sea. The advanced technologies and capabilities of CR6000 were verified from the operational and functional test conducted in the sea-trial. The experimental data acquired from the sea-trial were summarized and the first experience of the deep-sea walking robot was presented in this paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.177-184
• /
• 2018

In case that limited resources can be mobilized, non-structural countermeasures such as 'monitoring using Information and Communication Technology might be one of solutions to mitigate disaster risks. Having established the monitoring system, operational and maintenance costs to maximize the effectiveness might trouble the authority concerned or duty attendant who is in charge. In this respect, "Guerrilla Sensor" would be very cost effective because of the inherent mobility characteristic. The sensor device with the IRIS camera and GPS (Global Positioning System) equipped, is basically battery-operated and communicates with WCDMA (Wideband Code Division Multiple Access). It has a strong advantage of capabilities for 'Disaster Response' with immediate and prompt action on the spot, making the best use of IoT (Internet of Things), especially with the mobile web. This paper will explain how the sensor system works in real-time GIS (Geographic Information System) pinpointing the exact location of the abnormal movement/ground displacement and notifying the registered users via SMS (Short Message Service). Real time monitoring with early warning and evaluation of current situations with LBS (Location Based Service), live image and data information can help to reduce the disaster impact. Installation of Guerrilla sensor for a real site application at Gimcheon, South Korea is also reported.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.2 s.115
• /
• pp.99-112
• /
• 2006

In contemporary design conditions, the focus of landscape architecture has shifted from 'form' to 'process.' Various experimental diagrams have been proposed to overcome the limitations of conventional form-oriented landscape design. This study aims to reconsider theoretically and critically the modes and mechanism of diagrams in recent landscape architectural design. It also explores the operational capabilities of diagram in design process. Although the traditional diagram has served as explanatory and representational graphics in design, contemporary designers emphasize the generative function of diagram on the basis of Gilles Deleuze's theory of 'diagram as abstract machine.' They manifest and practise that diagrams call generate forms and proliferate spaces in their design development. This paper examines current examples of generative and constructive diagrams produced by leading designers. However, the author illuminates another significance of diagram: the diagram as strategic media of design. Contemporary environments and conditions of design, such as the complexity of city and the interactivity of new economy, call for new design intelligence and strategic design. These situations require alternative media in design process. In this context, the diagram can function as strategic media of dynamic and flexible design. This is why contemporary landscape theory and practice have to give attention to diagrams.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.526-535
• /
• 2016

In this study, the estimating weight data of eight leading ships of Korea navy were processed by comparing with the final weight data of their incline test results statistically, and are analyzed as follows; The maximum criteria of the weight margins of Korea naval ship in the preliminary and detailed design phases seem to be appropriate values, but the minimum criteria would be advisable to update more reasonable values. And, the limitation that the acceptable deviation of lightship weight should be 10 % of the lightship weight on a naval ship's ROC(Required Operational Capabilities) is recommended to be prohibited, because it comes from the weight estimation which has considerable uncertainty and it may also drop off design flexibility. Finally, the SWBS(Ship Work Breakdown System) groups which have larger deviation values in the estimating weight of naval ships are necessary to improve their accuracies, and to upgrade their weight database continuously.