• Journal of The Korean Society of Grassland and Forage Science
• /
• v.26 no.1
• /
• pp.53-62
• /
• 2006

Near infrared reflectance spectroscopy (NIRS) has been increasingly used as a rapid, accurate method of evaluating some chemical compositions in forages. Analysis of forage quality by NIRS usually involves dry ground samples. Costs might be reduced if samples could be analyzed without drying or grinding. The objective of this study was to investigate effect of sample preparations and spectral math treatments on prediction ability of chemical composition for corn silage by NIRS. A population of 112 corn silage representing a wide range in chemical parameters were used in this investigation. Samples of com silage were scanned at 2nm intervals over the wavelength range 400-2500nm and the optical data recorded as log l/Reflectance(log l/R) and scanned in overt-dried grinding(ODG), liquid nitrogen grinding(LNG) or intact fresh(IF) condition. Samples were analysed for neutral detergent fiber(NDF), acid detergent fiber(ADF), acid detergent lignin(ADL), crude protein(CP) and crude ash content were expressed on a dry-matter(DM) basis. The spectral data were regressed against a range of chemical parameters using modified partial least squares(MPLS) multivariate analysis in conjunction with four spectral math treatments to reduce the effect of extraneous noise. The optimum calibrations were selected on the basis of minimizing the standard error of cross validation(SECV). The results of this study show that NIRS predicted the chemical parameters with very high degree of accuracy(the correlation coefficient of cross validation$(R^2cv)$ range from $0.70{\sim}0.95$) in ODG. The optimum equations were selected on the basis of minimizing the standard error of prediction(SEP). The Optimum sample preparation methods and spectral math treatment were for ADF, the ODG method using 2,10,5 math treatment(SEP = 0.99, $R^2v=0.93$), and for CP, the ODG method using 1,4,4 math treatment(SEP = 0.29. $R^2v=0.91$).

• Journal of the Korean Society of School Health
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2004

Purpose : this study purposed to investigate school nursing phenomena in Korea by applying ICNP, the international standard nursing classification system developed by ICN, and to compare school nursing phenomena at elementary, middle and high schools. Method : The subjects of this study are 110 nursing teachers from 82 elementary schools, 16 middle schools, and 12 high schools. In the survey, subjects were asked to score the degree to which phenomena and characteristics of Korean school nursing, identified in previous research, on a 5 point scale. Questionnaires were distributed and recovered by mail and email. The period of data collection was 6 months from July to December 2003. The general characteristics of schools and nursing teachers were represented with frequencies and percentages, the phenomena and characteristics of school nursing with the mean score of the questions, and the phenomena school nursing by school grade with ANOVA and Duncan's posterior analysis. Results : 1) As for the characteristics of schools according to school nursing phenomena related to human behavior, the mean score of questions on inadequate stress management was highest at 3.24 points followed by the score on inadequate weight control (3.23), inadequate eating habits (3.22), the risk of spine disorders (2.68), inadequate emergency management (2.62), inadequate response to sex -related problems (2.19), and smoking and drug use (1.85). 2) As for the characteristics of schools according to school nursing phenomena related to human function, the mean score of questions on oral health management was highest at 3.11 points followed by the score on the risk of digestive system disorder (2.87), improper eyesight management (2.81), the risk of respiratory system disorders (2.75), lack of sexual identity (2.52), and inadequate contagious disease control (2.12). 3) As for the mean score according to school nursing phenomena related to environment, the score of the risk of accidents in classroom was highest as 2.68 points followed by the score of the risk of accidents around the school (2.65), maladjustment to school (2.62), the risk of accidents outside the classroom (2.43), inadequate learning environment (1.83), the risk of exposure to socially and physically harmful environment factors (1.82), and inadequate waste disposal (1.77). 4) This study tested the mean scores of questions corresponding to each school nursing phenomenon in order to see if there is a difference in the school nursing phenomenon among elementary, middle and high schools, and performed Duncan's posterior comparison for school nursing phenomena. A significant difference was found at p<.1. According to the results, school nursing phenomena found to be significantly different among elementary, middle and high schools was smoking and drug use (p<.05), which appeared more problematic in high school than in elementary school. phenomena such as inadequate eating habits, inadequate weight control, inadequate response to sex-related problems and inadequate waste disposal were also found to be statistically different at p<.1; however, according to the result of Duncan's posterior comparison, no difference was found among groups in improper eating habits and improper response to sex-related problems, and a significant difference was found between middle and high schools in inadequate weight control and inadequate waste disposal. Conclusion: Based on the results of this study, it is necessary to plan school health projects focused on the characteristic school nursing phenomena that had high scores and to develop and execute school healthe projects in accordance with the characteristics of elementary, middle and high schools. Considering that the scores of school nursing phenomena related to human behavior are high, it is necessary to introduce school health promotion projects in a systematic way.

• Korean journal of communication and information
• /
• v.35
• /
• pp.250-291
• /
• 2006

This study examines the regulatory issues and introduction problems of TV-betting data broadcasts in Korea by in-depth interview with a panel group. TV-betting data broadcast services of card games and horse racing games are widely in use in Europe and other parts of the world. In order to carry out the study, a demo program of TV-betting data broadcast in the OCAP(OpenCableTM Application Platform Specification) system environment, which is the data broadcasting standard for digital cable broadcasts in Korea was exposed to the panel group and then they were interviewed after watching and using the program. The results could be summarized as below. First of all, while TV-betting data broadcasts have many elements of entertainment, the respondents thought that it would be difficult to introduce TV-betting in data broadcasts as in overseas countries largely due to social factors. In addition, in order to introduce TV-betting data broadcasts, they suggested that excessive speculativeness must be suppressed through a series of regulatory system devices, such as by guaranteeing credibility of the media based on safe security systems for transactions, scheduling programs with effective time constraints to prevent the games from running too frequently, limiting the betting values, and by prohibiting access to games through set-top boxes of other data broadcast subscribers. The general consensus was that TV-betting could be considered for gradual introduction within the governmental laws and regulations that would minimize its ill effects. Therefore, the government should formulate long-term regulations and policies for data broadcasts. Once the groundwork is laid for safe introduction of TV-betting on data broadcasts within the boundary of laws and regulations, interactive TV games are expected to be introduced in Korea not only for added functionality of entertainment but also for far-ranging development of data broadcast and new media industries.

• Asia pacific journal of information systems
• /
• v.17 no.4
• /
• pp.207-228
• /
• 2007

Measuring Information Technology(IT) organizations' activities have been limited to mainly measure financial indicators for a long time. However, according to the multifarious functions of Information System, a number of researches have been done for the new trends on measurement methodologies that come with financial measurement as well as new measurement methods. Especially, the researches on IT Balanced Scorecard(BSC), concept from BSC measuring IT activities have been done as well in recent years. BSC provides more advantages than only integration of non-financial measures in a performance measurement system. The core of BSC rests on the cause-and-effect relationships between measures to allow prediction of value chain performance measures to allow prediction of value chain performance measures, communication, and realization of the corporate strategy and incentive controlled actions. More recently, BSC proponents have focused on the need to tie measures together into a causal chain of performance, and to test the validity of these hypothesized effects to guide the development of strategy. Kaplan and Norton[2001] argue that one of the primary benefits of the balanced scorecard is its use in gauging the success of strategy. Norreklit[2000] insist that the cause-and-effect chain is central to the balanced scorecard. The cause-and-effect chain is also central to the IT BSC. However, prior researches on relationship between information system and enterprise strategies as well as connection between various IT performance measurement indicators are not so much studied. Ittner et al.[2003] report that 77% of all surveyed companies with an implemented BSC place no or only little interest on soundly modeled cause-and-effect relationships despite of the importance of cause-and-effect chains as an integral part of BSC. This shortcoming can be explained with one theoretical and one practical reason[Blumenberg and Hinz, 2006]. From a theoretical point of view, causalities within the BSC method and their application are only vaguely described by Kaplan and Norton. From a practical consideration, modeling corporate causalities is a complex task due to tedious data acquisition and following reliability maintenance. However, cause-and effect relationships are an essential part of BSCs because they differentiate performance measurement systems like BSCs from simple key performance indicator(KPI) lists. KPI lists present an ad-hoc collection of measures to managers but do not allow for a comprehensive view on corporate performance. Instead, performance measurement system like BSCs tries to model the relationships of the underlying value chain in cause-and-effect relationships. Therefore, to overcome the deficiencies of causal modeling in IT BSC, sound and robust causal modeling approaches are required in theory as well as in practice for offering a solution. The propose of this study is to suggest critical success factors(CSFs) and KPIs for measuring performance for IT organizations and empirically validate the casual relationships between those CSFs. For this purpose, we define four perspectives of BSC for IT organizations according to Van Grembergen's study[2000] as follows. The Future Orientation perspective represents the human and technology resources needed by IT to deliver its services. The Operational Excellence perspective represents the IT processes employed to develop and deliver the applications. The User Orientation perspective represents the user evaluation of IT. The Business Contribution perspective captures the business value of the IT investments. Each of these perspectives has to be translated into corresponding metrics and measures that assess the current situations. This study suggests 12 CSFs for IT BSC based on the previous IT BSC's studies and COBIT 4.1. These CSFs consist of 51 KPIs. We defines the cause-and-effect relationships among BSC CSFs for IT Organizations as follows. The Future Orientation perspective will have positive effects on the Operational Excellence perspective. Then the Operational Excellence perspective will have positive effects on the User Orientation perspective. Finally, the User Orientation perspective will have positive effects on the Business Contribution perspective. This research tests the validity of these hypothesized casual effects and the sub-hypothesized causal relationships. For the purpose, we used the Partial Least Squares approach to Structural Equation Modeling(or PLS Path Modeling) for analyzing multiple IT BSC CSFs. The PLS path modeling has special abilities that make it more appropriate than other techniques, such as multiple regression and LISREL, when analyzing small sample sizes. Recently the use of PLS path modeling has been gaining interests and use among IS researchers in recent years because of its ability to model latent constructs under conditions of nonormality and with small to medium sample sizes(Chin et al., 2003). The empirical results of our study using PLS path modeling show that the casual effects in IT BSC significantly exist partially in our hypotheses.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.36 no.3
• /
• pp.9-20
• /
• 2008

The government is planning to link a small park with the soon to be ready subway line 9 as a part of Seoul's policy, "The standard or plan for making a water-friendly space by water use" (2007). However, the specified concepts and instructions of the small parks need further work. Therefore, the policy is expected to expand to neighboring small parks near the subway station, but these are not supported by research or data which suggests the needs or actual user behavior and utilization of small parks. our country added the specified concept of small parks and theme parks to the classification of urban parks in the Urban Park Act Revision (2005.3.31), but the concept of small parks is not clearly settled in the law in the scopes of its function, scale, promotion nor particularly defined plans for small park projects. This study examines as small park near a subway station. The characteristics of there region and users vary from the characteristics of the station and region. In the "directions for concrete standards under the types of urban parks and green zones" (2007.2) the types of small parks are classified by "regional characteristics" and "user characteristics". Therefore, this study classifies the subject of neighboring small parks near subway stations as the neighborhood and small urban parks according to the Urban Park Act. The study was paralleled with observation and questionnaires on the analysis of the neighborhood and small urban parks. The actual conditions of park utilization and user behavioral characteristics were deducted by observation, while the questionnaire determined actual user utilization, importance and satisfaction level as well as the small park environment. This study largely focused on three aspects: park facility, design of this sentence isn't even complete. The second aspect isn't finished and the third isn't here.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.2
• /
• pp.65-88
• /
• 2008

To achieve the age of 30,000 dollars GNP, The business with speed will hold a more crucial point than the business with scale, and the mass consumption market will be transformed and changed into the niche market. Moreover, it will not be easy for the company without the peculiar and creative technology to survive in the severe competition. Under these circumstances, The innovative company which knows how to use this new paradigm will select the better position in the changing market. Innovation type SMEs are contributing in maintaining the international competitiveness of domestic economy by serving high-tech and the promotion of employment. Also, Innovation type SMEs have the most important economic leverage in our domestic economy. It's a source of the growth in domestic economy. Therefore, A lot of countries have been trying to support innovation type SMEs (with a small capital and high-tech). And many countries also try to protect and promote the innovation type SMEs. Especially the Korean government is also promoting innovation type SMEs in many ways, because the future of innovation type SMEs are not bright. This study explored the three innovative SEMs and studied 1) entrepreneur characteristics, 2) the industry environment, 3) competitive strategies, and 4) resources and capabilities of organization, which have been considered as the success factors for entrepreneurial firms. This study also holds that the characteristics of entrepreneurs is one of the most important factor to impact the success of innovative SMEs. Most of entrepreneurs have started their business with high education career and field experiences and have high intentions in developing new/high techonologies, challenging spirits, and clear vision and goals. The innovative SMEs with small kinds of products and services, narrow market, and small resources are more sensitively impacted by the environment especially. But the SMEs which entered into market early could have the comparative excellencies in their market to survive and grow in the future. They also have competitive advantages in the market using differentiation strategies by technology innovation. Technology innovation and differention strategies are one of the success factors in SMEs, They entered into the niche market using this weapons. The capabilities of changing organization to their changing environment, the open orgarnization culture, the continuous employment education, and the building the organic organization are also success factors of innovative SMEs. The SMEs with the simple organization structure can make fast decisions and operate with the autonomous and flexible ways. These only three cases will not shown successful factors of over 12,000 Innovation type SMEs in Korea and this study of Innovation type SMEs is insufficient from all aspects. But this study have many implications for the future research and the entrepreneurs ready for their business.

• Composites Research
• /
• v.15 no.4
• /
• pp.23-31
• /
• 2002

The two dimensional size effect of specimen gauge section ($length{\;}{\times}{\;}width$) was investigated on the compressive behavior of a T300/924 $\textrm{[}45/-45/0/90\textrm{]}_{3s}$, carbon fiber-epoxy laminate. A modified ICSTM compression test fixture was used together with an anti-buckling device to test 3mm thick specimens with a $30mm{\;}{\times}{\;}30mm,{\;}50mm{\;}{\times}{\;}50mm,{\;}70mm{\;}{\times}{\;}70mm{\;}and{\;}90mm{\;}{\times}{\;}90mm$ gauge length by width section. In all cases failure was sudden and occurred mainly within the gauge length. Post failure examination suggests that $0^{\circ}$ fiber microbuckling is the critical damage mechanism that causes final failure. This is the matrix dominated failure mode and its triggering depends very much on initial fiber waviness. It is suggested that manufacturing process and quality may play a significant role in determining the compressive strength. When the anti-buckling device was used on specimens, it was showed that the compressive strength with the device was slightly greater than that without the device due to surface friction between the specimen and the device by pretoque in bolts of the device. In the analysis result on influence of the anti-buckling device using the finite element method, it was found that the compressive strength with the anti-buckling device by loaded bolts was about 7% higher than actual compressive strength. Additionally, compressive tests on specimen with an open hole were performed. The local stress concentration arising from the hole dominates the strength of the laminate rather than the stresses in the bulk of the material. It is observed that the remote failure stress decreases with increasing hole size and specimen width but is generally well above the value one might predict from the elastic stress concentration factor. This suggests that the material is not ideally brittle and some stress relief occurs around the hole. X-ray radiography reveals that damage in the form of fiber microbuckling and delamination initiates at the edge of the hole at approximately 80% of the failure load and extends stably under increasing load before becoming unstable at a critical length of 2-3mm (depends on specimen geometry). This damage growth and failure are analysed by a linear cohesive zone model. Using the independently measured laminate parameters of unnotched compressive strength and in-plane fracture toughness the model predicts successfully the notched strength as a function of hole size and width.

• 대한공업교육학회지
• /
• v.38 no.1
• /
• pp.49-67
• /
• 2013

The purpose of this study is to analyze the external systems and the units 'problem solving and invention' of the middle school technology and home economics 1 textbooks of the revised 2011 national curriculum in an effort to provide some information on the content system of invention education in technology class, as invention education was provided as part of a regular subject for the first time. The findings of the study were as follows: First, 'Technology and Inventions' chapter of Technology and Home Economics 1 Textbooks occupied 10-18% share, with the subchapter of 'Problem Solving and Invention' unit taking up 6.7-29% of the textbooks. Second, for most textbooks, 'Technological Problem Solving', 'Idea Generation' 'Multi-dimensional Projection Method', 'Expansive Thought-Processing Methodology', 'Converging Thought Methodology' and 'Invention in Everyday Lives' were included as main contents based on the accomplishment criteria presented in education process interpretation documents. Third, the detailed structures were generally made up as follows: Introduction (Broad Chapter Title, Subchapter Table of Contents, Introduction, Subchapter Title, Study Objectives, Open Thinking); Development (Unit Title, Thinking Ahead, Core Terms, Main Text, Study Helper, Activities, Research Exercises, Supplemental Readings, In-depth Study Topics, Technology in Everyday Lives, Reading Topics, Discussion Topics, and Career Helpers); and Summary (Subchapter Summary, Study Summary, Terms Summary, Writing Follow-up, Self Review, Broad Chapter Evaluation). Fourth, based on the analysis of figures included, photographs had the largest share, followed by figures, tables, and graphs. The photos were used to illustrate various inventions, invention methodologies, and exercise activities, while figures were included to depict the contents included in the main text, and the tables to assist to preparation of process diagrams or materials lists. Fifth, based on the analysis of content weights, greater weights were placed on 'Inventions and Thoughts', and 'Invention Experiment Activities,' while 'Understanding Inventions' and 'Invention and Patents' chapters did not have a lot of texts involved. Sixth, based on the analysis of content presentation methods, most textbooks combined figures, tables, illustrations and texts to discuss the topics. Based on the above study results, we suggest the following: First, a consistent education curriculum should be developed over the topic of invention; and second, more precise and systematic analysis of textbooks would need to be performed.

• Economic and Environmental Geology
• /
• v.45 no.1
• /
• pp.31-40
• /
• 2012

This paper examined the characteristics of ductile and brittle structural elements with detailed mapping by lithofacies classification to clarify the relationship between the geological structure and the geochemical high-grade uranium anormal zone and to provide the basic information on the flow of groundwater in the eastern area of Shinbo mine, Jinan-gun, Jeollabuk-do, Korea. It indicates that this area is mainly composed of Precambrian quartzite, metapelite, metapsammite, which show a zonal distribution of mainly ENE-WSW trend, and age unknown pegmatite and Cretaceous porphyry which intrude them. But the Cretaceous Jinan Group which unconformably covers them, contrary to assumption, could not be observed. The main ductile deformation structures of Precambrian metasedimentary rocks were formed at least through three phases of deformation [ENE striking regional foliation (D1) -> ENE or EW striking crenulation foliation (D2) -> WNW or EW trending open, tight, kink folds (D3)]. The predominant orientation of S1 regional foliation strikes ENE and dips south, being similar to the zonal distribution of Precambrian metasedimentary rocks. Most predominant orientation of high-angled brittle fracture (dip angle ${\geq}45^{\circ}$) [ENE (frequency: 24.3%) > NS (23.9%) > (N)NW (18.8%) > WNW (16.9%) > NE (16.1%) fracture sets in descending frequency order], which is closely related to the flow of groundwater, strikes ENE and dips south. It also agrees with the zonal distribution of metasedimentary rocks and the predominant orientation of S1 regional foliation. The next one strikes NS and dips east or west. Considering the controlling factor of the geochemical uranium anormal zone in the Shinbo mine and its eastern areas from the above structural data. the uranium source rock in these areas might be pegmatite and the geochemical uranium anormal zone in the Sinbo mine area could be formed by an secondary enrichment through the flow of pegmatite aquifer's groundwater into the Sinbo mine area like the previous research's result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.578-589
• /
• 2018

Building Integrated Photovoltaic (BIPV) system is a typical integrated system that simultaneously performs both building function and solar power generation function. To maximize its potential advantage, however, the solar photovoltaic power generation function must be integrated from the early conceptual design stage, and maximum power generation must be designed. To cope with such requirements, preliminary research on BIPV design process based on architectural design model and computer simulation results for improving solar power generation performance have been published. However, the requirements of the BIPV system have not been clearly identified and systematically reflected in the subsequent design. Moreover, no model has verified the power generation design. To solve these problems, we systematically model the requirements of BIPV system and study power generation design based on the system requirements model. Through the study, we consistently use the standard system modeling language, SysML. Specifically, stakeholder requirements were first identified from stakeholders and related BIPV standards. Then, based on the domain model, the design requirements of the BIPV system were derived at the system level, and the functional and physical architectures of the target system were created based on the system requirements. Finally, the power generation performance of the BIPV system was evaluated through a simulated SysML model (Parametric diagram). If the SysML system model developed herein can be reinforced by reflecting the conditions resulting from building design, it will open an opportunity to study and optimize the power generation in the BIPV system in an integrated fashion.