• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.468-471
• /
• 2005

The Air Quality Sensor(AQS), located near the fresh air inlet, serves to reduce the amount of pollution entering the vehicle cabin through the HVAC(heating, ventilating, and air conditioning) system by sending a signal to close the fresh air inlet door/ventilation flap when the vehicle enters a high pollution area. One chip sensor module which include above two sensing elements, humidity sensor and bad odor sensor was developed for AQS (air quality sensor) in automobile. With this sensor module, PIC microcontroller was designed with back propagation neural network to reduce detecting error when the motor vehicles pass through the dense fog area. The signal from neural network was modified to control the inlet of automobile and display the result or alarm the situation. One chip microcontroller, Atmega128L (ATmega Ltd., USA) was used. For the control and display. And our developed system can intelligently detect the bad odor when the motor vehicles pass through the polluted air zone such as cattle farm.

• 제어로봇시스템학회논문지
• /
• 제12권6호
• /
• pp.539-546
• /
• 2006

The Air Quality Sensor(AQS), located near the fresh air inlet, serves to reduce the amount of pollution entering the vehicle cabin through the HVAC(heating, ventilating, and air conditioning) system by sending a signal to close the fresh air inlet door/ventilation flap when the vehicle enters a high pollution area. The sensor module which includes two independent sensing elements for responding to diesel and gasoline exhaust gases, and temperature sensor and humidity sensor was designed for intelligent AQS in automobile. With this sensor module, AVR microcontroller was designed with back propagation neural network to a powerful gas/vapor pattern recognition when the motor vehicles pass a pollution area. Momentum back propagation algorithm was used in this study instead of normal backpropagation to reduce the teaming time of neural network. The signal from neural network was modified to control the inlet of automobile and display the result or alarm the situation in this study. One chip microcontroller, ATmega 128L(ATmega Ltd., USA) was used for the control and display. And our developed system can intelligently reduce the malfunction of AQS from the dampness of air or dense fog with the backpropagation neural network and the input sensor module with four sensing elements such as reducing gas sensing element, oxidizing gas sensing element, temperature sensing element and humidity sensing element.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2000년도 2nd Korea-Japan Advanceed Semiconductor Packaging Technology Seminar
• /
• pp.39-45
• /
• 2000

A small camera module fabricated by including bare chip bonding methods is utilized to realize advanced mobile devices. One of the driving forces is the TOG (Tape On Glass) bonding method which reduces the packaging size of the image sensor clip. The TOG module is a new thinner and smaller image sensor module, using flip chip interconnection method with the ACP (Anisotropic Conductive Paste). The TOG production process was established by determining the optimum bonding conditions for both optical glass bonding and image sensor clip bonding lo the flexible PCB. The bonding conditions, including sufficient bonding margins, were studied. Another bonding method is the flip chip bonding method for DSP (Digital Signal Processor) chip. A new AC\ulcorner was developed to enable the short resin curing time of 10 sec. The bonding mechanism of the resin curing method was evaluated using FEM analysis. By using these flip chip bonding techniques, small camera module was realized.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.171-174
• /
• 2000

In stead of RF module which has been used conventionally in many remote measurement applications, a new type of remote measurement system based on PCS(Personal communication system) and one chip Microcontroller is proposed in this work. PCS has many advantages with respect to cost reliability, communication quality, and so on. The proposed system consists of three different modules: PCS module, micro-controller module, and sensor module. System configuration as well as illustrative experiments will be described in detail.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.190-193
• /
• 2009

무선 센서 네트워크에서 가장 중요하고 기본적인 요소는 환경 정보를 수집하고 이를 사용자 응용시스템에 전송하는 무선 센서 노드이다. 무선 센서 노드는 센서로 환경 정보를 수집하고 이를 저장, 가공하여 처리된 데이터를 사용자에게 전송하는 무선 송수신 장치로 기술의 발전에 따라 소형화, 지능화되고 있다. 특히 마이크로컨트롤러, RF 모듈, 메모리 등을 하나의 칩 내부에 모두 통합하는 SoC(System-on-Chip)기술은 센서 노드의 소형화와 제조 단가를 낮추는데 중요한 역할을 한다. 본고에서는 상용 SoC를 사용하여 무선 센서 네트워크를 위한 소형 무선 센서 노드를 설계하였으며 이를 이용한 여러 활용 방안 및 추가적인 고려사항에 대하여 논하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.709-711
• /
• 2016

산업현장에서 자동화시스템은 PLC(Program Logic Control)를 사용하여 시스템을 제어하고, 감지기에서 전달되는 정보로 시스템의 상태를 계측하고 생산성 향상을 위해 사용되고 있다. 본 연구에서 제안하는 진단 모니터링시스템은 릴레이모듈, 원칩프로세서모듈 그리고 컴퓨터 모니터링시스템으로 구성된다. 보조계전기의 고장을 실시간으로 파악하여 고장 난 시스템을 수리하고, 정상 가동에 소요되는 시간을 최소화하여 생산성을 향상시키고자 한다.

• 전기전자학회논문지
• /
• 제18권4호
• /
• pp.552-558
• /
• 2014

본 논문에서는 원격 방사선 측정을 위한 ZigBee 원칩형 통신 모듈 설계방법을 제안한다. 제안된 ZigBee 원칩형 통신모듈 설계는 ZigBee 시스템 구성을 위해 일반적으로 사용되는 2개의 칩 제어 프로세서와 ZigBee RF 디바이스로 구성되는 방식을 한 개의 칩 모듈로 설계한다. 원격 방사선 측정을 위한 ZigBee 원칩형 통신 모듈은 무선통신 통합제어부, 센서 및 고전압 발생부, 충전 및 전원회로부, 유선통신부, RF 회로부 및 안테나부 등으로 구성된다. 무선통신 통합제어부는 ZigBee를 위한 무선통신 제어 기능 및 방사선 측정 및 제어를 위한 기능을 수행한다. 센서 및 고전압 발생부는 2차에 걸쳐 500V의 고전압을 생성하여 GM Tube를 통해 감지된 방사선에 대한 펄스를 증폭 필터링 하는 기능을 수행한다. 충전 및 전원회로부는 리튬이온 배터리의 충전 및 원칩 프로세서에 전원을 공급하는 기능을 수행한다. 유선통신부는 PC와의 인터페이스 및 디버깅을 위한 USB 인터페이스 및 원거리 유선 통신이 가능하도록 RS-485/422 인터페이스 기능을 수행한다. RF 회로부 및 안테나부는 칩안테나를 적용할 수 있도록 RLC 수동소자를 적용하여 BALUN 및 안테나 임피던스 매칭 회로를 구성하여 무선통신이 가능하도록 한다. 제안된 원격 방사선 측정을 위한 ZigBee 원칩형 통신 모듈을 설계 실험한 결과, 10m, 100m 구간에서 모두 데이터가 정상적으로 전송되어서 원격 방사선량 측정이 되었음을 확인할 수가 있었다. 또한 낮은 소비전류와 적은 비용으로 원격 방사선량 측정환경을 구축할 수 있었다. 따라서 방사선 측정장치의 선형성 확보 및 장치의 소형화를 통해 안정적인 방사선 측정 및 실시간 모니터링 환경을 구축할 수가 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.360-361
• /
• 2006

This paper describes a wire and wireless network sensor for temperature and humidity measurements. The network sensor comprises PLC(Power Line Communication) and RF transmitter(433MHz) for acquiring an internal (on-board) sensor signal, and measured data is transmitted to a main processing unit. The network sensor module is consist of MEMS sensor, 10-bit A/D converter, pre-amp., gain-amp., ADUC812 one chip processor and PLC/RF transmitting unit. The temperature and humidity sensor is based on MEMS piezoelectric membrane structure and is implemented by using dual function sensor for smart home and smart building.

• International Journal of Advanced Culture Technology
• /
• 제7권4호
• /
• pp.236-241
• /
• 2019

This paper will read about a multichannel frequency-modulated continuous wave (FMCW) radar sensor with switching transmit (TX) antennas is developed at W-band. To achieve a high angular resolution, a uniform linear array consisting of 5 switching-TX and 12 receive (RX) antennas is employed with the digital beamforming technique. The overall radar front-end module comprises a W-band transceiver and TX/RX antennas. A multichannel transceiver module consists of 5 up-conversion and 12 down-conversion channels, where one of the TX channels is sequentially switched ON. For developing transmitter, we developed an HPA (high power amplified) MMIC chip for W-band radar system and fabricated a transmitter module using this chip. In order to develop the W-band transmitter, we analyzed the important antenna transition structure from HPA MMIC line to W/G (Waveguide)antenna via M/S(microstrip) and fabricated it with 5 transmission channels. As a result, the output power of the transmitter was within 1 dB of the error range after analysis and measurement under normal temperature and environmental conditions.

• 한국컴퓨터산업학회논문지
• /
• 제6권5호
• /
• pp.821-828
• /
• 2005

This paper was proposed Intelligent and wireless USN/RFID module system that can overcome disadvantage of existing RFID system with no sensing module and wire communication. The proposed USN/RFID system was designed and fabricated. After fabricating new system, we analyzed the characteristics of USN/RFID module. After design VCO block that is point circuit to develop next generation system one chip of RFID system. we were carried out simulation and verified the validity, this paper was showed that VCO system was enough usable in wireless network module. USN/RFID Reader module shows superior result that validity awareness distance corresponds to 30M in the case of USN and to 5M in RFID Reader's case and 900MHz of commercial frequency does practical use enoughly in range of high frequency. The USN/RFID Reader module is considered to act big role to Ubiqitous industry offering computing surrounding of new concept that is intelligence type service and that was associated to real time location system(RTLS). environment improvement/supervision. national defense, traffic administration etc.