• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.81-86
• /
• 1997

Platinum thin films were deposited on $SiO_{2}/Si$ and $Al_{2}O_{3}$ substrates by DC magnetron sputtering for RTD (resistance thermometer devices) temperature sensors. The resistivity and sheet resistivity of these films were decreased with increasing the annealing temperature and time. We made Pt resistance pattern on $Al_{2}O_{3}$ substrate by lift-off method and fabricated Pt-RTD temperature sensors by using W-wire, silver epoxy and SOG(spin-on-glass). In the temperature range of $25{\sim}400^{\circ}C$, we investigated TCR(temperature coefficient of resistance) and resistance ratio of Pt-RTD temperature sensors. TCR values were increased with increasing the annealing temperature, time and the thickness of Pt thin films. Resistance values were varied linearly within the range of measurement temperature. At annealing temperature of $1000^{\circ}C$, time of 240min and thin film thickness of $1{\mu}m$, we obtained TCR value of $3825ppm/^{\circ}C$ close to the Pt bulk value.

• The Journal of Society for e-Business Studies
• /
• v.18 no.1
• /
• pp.129-146
• /
• 2013

This paper focuses on the systematic approach to handle possible resistance by the members of an organization which adopts ERP system. We also analyze various factors that affect the members' receptivity to the new system. The analytic result from the data of 169 universities shows that emotional factors such as fear and doubt play a significant role, while other factors such as relative advantages of efficiency, relative advantages of system and technology support does not. This research demonstrates both the psychological and behavioral aspects of resistance to technology, and then provides a new perspective on the adoption and diffusion of technological innovation in an organization by systematically analyzing the possible negative consequences while the majority of existing research emphasizes on the rosy prospects of the innovation.

• Korean Journal of Plant Tissue Culture
• /
• v.21 no.3
• /
• pp.151-156
• /
• 1994

Acifluorfen-tolerant cell lines of S, ptycanthum were isolated by stepwise selection using suspension culture. Growth of unselected line was completely inhibited at $0.5\;\mu\textrm{M}$, while some selected lines grew at $8\;\mu\textrm{M}$ acifluorfen. After subculturing on acifluorfen-free medium for 4 passages, six of the eleven cell lines screened and maintained their tolerance to $2\;\mu\textrm{M}$ acifluorfen. The regeneration capacity of selected cell lines in Solanum ptycanthum differed depending on the tell line. The acifluorfen tolerance of the somarclones regenerated from acifluorfen-tolerant cell lines differed depending on the somarclone. When plants were heated with $16\;\mu\textrm{M}$ acifluorfen, unselected control plane had over 75% phytotoxicity Many selected cell lines had less phytotoxicity than the seed-grown control plants. Tolerance to acifluorfen was inherited to the self-pollinated progenies. The inheritance patterns differed depending on the clone. Acifluorfen tolerance was inherited as a semidominant trait. Other segregation patterns were also observed. acifluorfen tolerance was recessive and acifluorfen sensitivity was dominant.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.136-144
• /
• 2010

The bar-shaped electrode is very popular for earth construction in Korea. Copper ground rod, Deep-buried ground rod and conductive concrete ground rod are major types of the bar-shaped electrode and generally applied on the distribution system. But in most case, to obtain the targeted ground resistance is difficult, because ground resistance is very different by soil condition. Therefore, a chemicals for reducing ground resistance is applied. In this paper, the initial and the variation of ground resistance according to the applied methods and types of chemicals over one year are compared with copper ground rod applied with water and the experimental results show that the new methods with chemicals reduced not only the initial ground resistance but also the variation of ground resistance over year.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.1
• /
• pp.114-123
• /
• 2020

The present study aimed the effects of power resistance training(PRT) on fitness, muscle mass and short physical performance battery(SPPB) elderly women. Thirty older woman(aged 70 over years) were divided in two groups : PRT(n=15) and traditional resistance training(TRT)(n=15). The volunteers trained three times a week, during 12weeks. Both groups performed an equal work output with load red color thera-band. Three sets of twelve repetitions of each exercise were performed with rest intervals of 60s between sets. According to the results. Main fitness were significantly difference in grip strength(TRT) and cardiopulmonary. Muscle was not significantly difference. And Timed up and go and 400m walking(TRT) were significantly difference. There is sufficient effects on between training method in fitness, SPPB but PRT training may yield better results compared with TRT.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.6
• /
• pp.5-11
• /
• 2015

Recently the necessity of developing the Load and Resistance Factor Design (LRFD) for shallow foundation has been raised to implement to the domestic design codes related to geotechnical engineering since the limit state design is requested as international technical standard for the foundation of structures. In this study, applicability of LRFD for shallow foundation on weathered soils was investigated and resistance factor for this case was proposed. The quantitative analyses on the uncertainty and resistance bias for shallow foundation on weathered soil ground were performed by collecting the statistical data about domestic case studies for design and construction of shallow foundation. Reliability analyses for shallow foundation were first performed using FDA (First-order Design value Approach) method. Resistance factors were calibrated using the load factors obtained from the specifications of shallow foundations on weathered soil ground. The influence of the load factors developed in this study on the resistance factors were discussed by comparing with the resistance factor obtained from using AASHTO load factors.

• Journal of the Korean Ceramic Society
• /
• v.34 no.3
• /
• pp.233-240
• /
• 1997

The Ru-based thick film resistor(TFR) for sintering at 90$0^{\circ}C$ was synthesized to prepare the LCR net-work. These compositions of pyrochlore could be prepared by decreasing the amount of PbO and increasing alumina and silica contents of glass frit. In this study, the sheet resistances of the TFTs. which sint-ered at 90$0^{\circ}C$ after printing on alumina substrate, the sheet resistances of the TFRs on inductor and capa-citor substrate and the interphase between TFR and substrate were observed. And the changes of the sheet resistance were obtained with the contents of RuO2. In case of the TFR sintered at 90$0^{\circ}C$, the sheet resis-tances on alumina substrates were in the range of 103~106$\Omega$/$\square$, but the sheet resistances of TFR on in-ductor and capacitor substrate were not obtained.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.1 s.34
• /
• pp.1-7
• /
• 2005

The effect of trimming process to adjust accurate resistance of a thin-film resistor was studied with respect to low temperature coefficient of resistance(TCR) and high precision. The characteristics of a thin-film resistor fabricated by sputtering were investigated depending on trimming condition and annealing temperature. Measured results showed that the characteristic of a thin-film resistor was degraded with increased trimming speed. However, an average resistance deviation and a TCR were improved to $0.26\%$ and 52.77[ppm/K], respectively, through annealing treatment. Also, thin-film resistors with 1 k$\Omega$ and 10k$\Omega$ showed better performance compared to a resistor with 100k$\Omega$. The Optimal trimming speed and annealing temperature were 20mm/sec and 539K, respectively, and under this optimal condition, a thin-film resistor with an average resistance deviation of $0.31\%$ and a TCR of below 10[ppm/K] was obtained.

• Korean journal of applied entomology
• /
• v.23 no.2 s.59
• /
• pp.89-95
• /
• 1984

Sixty isolates of Dendrophoma obscurans isolated from 19 important strawberry growing areas of Korea were tested in vitro for resistance to thiophanate-methyl and iprodione. Naturally-occurring thiophanate-methyl-resistant isolates were about 43 percents of isolates tested, whereas iprodione-resistant isolates were 10 percents. All these resistant isolates except SU 1 and SU 2, which were highly resistant to thiophanate-methyl, showed a week level of resistance. Iprodione-resistant isolates were readily obtained in vitro, when mycelial disk of the fungus was incubated on PDA media containing iprodione at the concentrations of $1{\mu}g/ml\;and\;10{\mu}g/ml$, but no thiophanate-methyl-resistant isolate from the mycelia with or without UV irradiation. All these artificially-obtained iprodione-resistant isolates were showed a high degree of resistance. On the strawberry leaves, thiophanate-methyl and iprodione were no longer effective to all resistant isolates at the recommended concentration, and the protective value to highly resistant isolates was much less than that of weakly resistant isolates. Isolates resistant to thiophanate-methyl were also resistant to benomyl but iprodione-resistant isolates did not show cross-resistance to thiophanate-methyl, benomyl, captan and zineb. Captan controlled both thiophanate methyl-resistant and iprodione-resistant isolates as effectively as sensitive isolates.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.1
• /
• pp.9-17
• /
• 1973

This paper dealt with composition of current stable negatil'e resistance circuit based on Beam resistance of the tube SAMUEL SEBLY suggested. Beam resistance which is decreased by input current increment on definite region of current, accompanied generation of equivalent e. m. f on model circuit. With equivalent e. m. f there appeared increased current on circuit but decrease of terminal voltage. Bloc constructed by above concept induced transistorized circuit which have NPN and a PNP Transistor. Circuit operation predicted and calculated values of negative resistance are coincident with experimental results. A Circuit proposed on this paper sllowed good linearity on Ve-Ji characteristics.