• Journal of Applied Biological Chemistry
• /
• v.52 no.2
• /
• pp.51-57
• /
• 2009

To investigate expression patterns of chitinase, ${\beta}$-1,3-glucanase and peroxidase involved in biological control of phytopathogens, three oil seed rapes (Capitol, Pollen and Saturnin) were used. Activities of the enzymes in old leaves were $9.7{\sim}11.8$ unit/mg protein in chitinase, $11.1{\sim}17.3$ unit/mg protein in ${\beta}$-1,3-glucanase and $0.6{\sim}1.7$ unit/mg protein in peroxidase. Activities of the enzymes in roots were $39.2{\sim}49.0$ unit/mg protein in chitinase, $49.9{\sim}62.0$ unit/mg protein in ${\beta}$-1,3-glucanase and $2.4{\sim}3.8$ unit/mg protein in peroxidase. Chitinase and ${\beta}$-1,3-glucanase activity were the highest level in Saturnin leaves and in Capitol roots while activities of those were the lowest level in Capitol leaves. Also, chitinase and ${\beta}$-1,3-glucanase and peroxidase activity were the lowest level in Saturnin roots. Active bands of chitinase isoform in leaves (73, 51, 40, 34, and 29 kDa) and in roots (100, 57 34, and 29 kDa) tissues showed in the SDS-PAGE gel. Active bands of ${\beta}$-1,3-glucanase isoform in leaves and roots (75 and 55 kDa) tissues showed on the SDS-PAGE gel. Active staining of peroxidase showed the strongest level in leaves and roots of Pollen. Active bands of peroxidase isoform in leaves (122, 114, and 93 kDa) and in roots (135, 122, 114, and 93 kDa) tissues showed on the Native-PAGE gel. These results indicated that establishment of expression pattern of enzymes in rape tissues could play as an important role with respect to resistance of plant pathogens in rape.

• Applied Chemistry for Engineering
• /
• v.27 no.6
• /
• pp.583-589
• /
• 2016

Lubricant additives including zinc dialkyldithiophosphate (ZDDP) containing metal have been widely used due to the advantage of very low cost, but they can generate impurities such as ash. In this work, ZDDP containing metals was partially replaced with bis[3-(dialkyloxyphosphorothionyl) thio-2-methylpropanyloxy] butane (BAP4s) which was synthesized conveniently and effectively from alkanediol without any metal components. Also, the wear resistance property of synthesized BAP4s were studied. Wear scar diameter (WSD) values of BAP4s with butyl, octyl, decyl, dodecyl or tetradecyl groups were also measured by four-ball test. As the length of the alkyl group increased from 4 to 8, the WSD value of BAP4s decreased rapidly from 0.59 to 0.45 mm, but from 8 to 14, the value increased very slowly from 0.45 to 0.50 mm. Thus, among all BAP4s, B8P4 having BAP4 with the octyl group, showed the lowest WSD value. Furthermore, the WSD values were measured in a lubricant base oil mixed with a 0.50 percent concentration (w/w) of either BAP4 or ZDDP. The former was 0.55 mm, and the latter was 0.45 mm. The thermal stability and tribofilm formation peroperty were also measured by thermogravimetric analyzer (TGA) and energy-dispersive X-rays spectroscopy (EDS), respectively.

• Korean Journal of Breeding Science
• /
• v.40 no.3
• /
• pp.318-323
• /
• 2008

Nokwon, a new cultivar for vegetable soybean, was developed from the cross between Keunolkong and Hyangnam-1 and released in 2006. The pedigree of Nokwon, designated as Milyang 153 in 2003, was SS96425-2B-11-4-1-1-1. Nokwon, used as a vegetable soybean was characterized by dark green pod, large seed, very short plant height, and lodging resistance. Nokwon has determinate growth habit, white flowers, gray pubescence, oval leaf shape and brown pods at maturity. The mature seeds have a greenish yellow seed coat with brown hilum and yellow cotyledon. In Korea, Regional Yield Trials (RYT) for vegetable soybean from 2004 to 2006, Nokwon shows strong tolerance to soybean mosaic virus and lodging in fields. Fresh pods of Nokwon harvested at the beginning of August, and stem height was 11cm shorter than 45 cm of Hwaeomputkong. In the same tests, fresh pod of Nokwon (11.4 ton/ha) yielded 14% higher than Hwaeomputkong (10.0 ton/ha). Nokwon had 5.9 cm fresh pod length, 13.1 mm fresh pod width, 75.4 g seed weight per 100 green seed, 39.4% green seed protein content, and 17.3% green seed oil content.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.684-689
• /
• 2010

'Sangwon', a new cultivar for vegetable soybean, was developed from the cross between 'Keunolkong' and 'Oshimamidori', and was released at the National Institute of Crop Science (NICS) in 2007. The goal to develop a vegetable soybean cultivar with green pod, early maturity, large seed size, high yield, lodging tolerance, and resistance to disease such as soybean mosaic virus (SMV). 'Sangwon' has light green pod, early maturity, large seed, short plant height, and lodging tolerance. 'Sangwon' has determinate growth habit, white flower, gray pubescence, and oval leaf shape. The matured seeds have a yellow seed coat with light brown hilum, and a yellow cotyledon. 'Sangwon' has 5.8 cm fresh pod length, 13.2mm fresh pod width, 69.5 g seed weight per 100 green seeds, 44.0% green seed protein content, and 14.8% green seed oil content. At the regional yield trials (RYT) for vegetable soybean from 2005 to 2007, 'Sangwon' shows strong resistance to soybean mosaic virus (SMV) and tolerance to lodging in fields. Fresh pods of 'Sangwon' were harvested at the beginning of August. In the same tests, fresh pod of 'Sangwon' (10.39ton/ha) yielded 5% higher than 'Hwaeomputkong' (9.90ton/ha).

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.3
• /
• pp.153-161
• /
• 2023

The worldwide effects of COVID-19 have led to a surge in online shopping and contactless services. The consumption pattern has caused the issues such as the environmental pollution together with the increase of plastic waste. Reducing the reliance on the petroleum based plastic use for the package and replacing it with environmentally friendly material are the simple ways in order to solve those problems. Paper is an eco-friendly product with high recyclability as the food packaging materials but has still poor barrier properties. A barrier coating on surface of the paper can be achieved with the proper packaging materials featuring water, gas and grease barrier. Polyethylene (PE) or polypropylene (PP) coatings which are generally laminated or coated to paper are widely used in food packaging applications to protect products from moisture and provide water or grease resistance. However, recycling of packaging containing PE or PP matrix is limited and costly because those films are difficult to degrade in the environment. This study investigated the recyclability of modified acrylic emulsion coating papers compared to PE and PP polymer matrixes as well as their mechanical and gas barrier properties. The results showed that PE or modified acrylic emulsion coated papers had better mechanical properties compared to the uncoated paper as a control. PE or PP coating papers showed strong oil resistance property, achieving a kit rating of 12. Those papers also had a significantly higher percentage of screen reject during the recycling process than modified acrylic coated paper which had a screen rejection rate of 6.25%. In addition an uncoated paper had similar value of a screen rejection rate. It may suggest that modified acrylic emulsion coating paper can be more easily recycled than PE or PP coating papers. The overall results of the study found that modified acrylic emulsion coating paper would be a viable alternative to suggest a possible solution to an environmental problem as well as enhancing the weak mechanical and poor gas barrier properties of the paper against moisture.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.7 no.1
• /
• pp.139-144
• /
• 1969

1. In order to obtain useful mutants such as early maturity, resistance to lodging, high protein and oil content, and capability of high yield, dormant seeds of two soybean varieties, Jang Dan Baik Mok and Clark, were treated with ${\gamma}$-ray, Ethyl Methane Sulfonate(EMS), Ethylene Imine(EI)and combinations of ${\gamma}$-ray and EMS or EI. 2. The germination rate and survival rate in a variety Jang Dan Baik Mok were significantly decreased with ${\gamma}$-ray treatment while it was not the same in the Clark variety. A significant decrease for seedling height measured at 14 and 21 days after sowing was found with the increase of ${\gamma}$-ray dose in both varieties. 3. Germination rates in both varieties were significantly decreased as EI concentration increases, particularly severe damage in germination was observed at 0.008 Mo. concentration. Germination rate damages were found with EMS concentration increases in the variety Jang Dan Baik Mok while no regular responses in seedling height were observed in the variety Clark. 4. Germination rate was significantly lowered with the combined treatment of EMS and ${\gamma}$-ray 24KR than that of EMS alone. In the treatments of ${\gamma}$-ray with three levels of EI concentration, the combined treatments except 24KR+EI 0.002 Mol. resulted in better germination than of EI alone. In both varieties, significant reduction in seedling height was observed in the combined treatments of ${\gamma}$-ray with various concentrations of EMS, whereas stimulation effect on seedling height was found with treatment of ${\gamma}$-ray EI +0.08Mol. 5. Germination rate, survival rate, and plant height as criteria of radio sensitivity, variety Jang Dan Baik Mok is moze sensitive to ${\gamma}$-ray, EMS, and EI than the variety Clark, and the varietal difference in responsibility to mutagen may be due to the genetic-constitution of the varieties.

• Journal of Aquaculture
• /
• v.21 no.2
• /
• pp.82-88
• /
• 2008

A 12-week feeding trial was conducted to investigate the effects of dietary supplementation of probiotics as a feed additive for juvenile Korean rockfish Sebastes schlegeli. Four experimental diets supplemented with no probiotic(Control), Bacillus polyfermenticus(BP), Bacillus licheniformis(BL) or Bacillus polyfermenticus plus Saccharomyces cerevisiae(BP+SC) at $1.0{\times}10^7$ CFU/kg diet as a dry-mater(DM) basis were prepared by mixing with a basal diet. After 12 weeks of the feeding trial, fish fed BP+SC diet showed significantly higher weight gain(WG), feed efficiency(FE), specific growth rate(SGR) and protein efficiency ratio(PER) than those of fish fed control diet(P<0.05), however there were no significant differences in WG, FE, SGR and PER among fish fed the BP, BL and BP+SC diets. Fish fed BP and BP+SC diets showed significantly higher condition factor(CF) than that of fish fed control and BL diets. Fish fed BP, BL, BP+SC diets showed significantly higher hepatosomatic index(HSI) than that of fish fed control diet, however there was no significant difference in HSI among fish fed BP, BL and BP+SC diets. Fish fed BP+SC diet showed significantly lower serum glucose than that of fish fed control diet, however there was no significant difference in serum glucose among fish fed BP, BL and BP+SC diets. Fish fed BP+SC diet showed significantly higher respiratory burst activity(NBT assay) than that of the fish fed control and BL diets, however there was no significant difference in NBT assay between fish fed BP and BP+SC diets. Fish fed BP and BL diets showed significantly higher lysozyme activity than that of the fish fed control diet, however there was no significant difference in lysozyme activity among fish fed BP, BL and BP+SC diets. Fish fed BP and BP+SC diets showed significantly lower cumulative mortality than that of the fish fed control diet, however there was no significant difference in cumulative mortality among fish fed BP, BL and BP+SC diets after the challenge test. From these results, dietary B. polyfermenticus, B. licheniformis and B. polyfermenticus plus S. cerevisiae supplementation in juvenile Korean rockfish diet could enhance growth performances, non-speicific immunities and a higher resistance against the specific pathogen.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.111-112
• /
• 2009

Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

• Asia Marketing Journal
• /
• v.12 no.4
• /
• pp.165-181
• /
• 2011

In 2005, Yuhan Kimberly found interesting points in the existing customers' U&A survey on the kitchen towel. The usage of Korean consumers is usually restricted to getting rid of the oil from the fans and the fried food. This usage limits could be the barrier to the diffusion of kitchen towel. Although consumers were worried about the hygiene situations about the dishcloth, they also percieved that the existing paper kitchen towels were short of something to soothe their inconveniences. As a result, the company made a decision to seek out the solution for the consumers' worries. The relative shortage of the paper kitchen towel compared to that of the unhygienic and inconvenient dishcloth was its lack of water-endurance. The dishcloth could be reliable in the wet environment which is very common in Korean kitchen, whereas the paper kitchen towel was perceived as very weak and unreliable in removing water form the dishes and the sink. To overcome the common sense of the consumers, it is important to shift the consumers' perception of the kitchen towel category. It is needed to expand the usage time from one time to several times in a day. So it is needed to redesign the customers' kitchen life. The company adopted the brand "Scott^®" to meet the global brand strategy of the parent company, Kimberley Clark. This brand was also adopted and made a succesful launch of the similar product lines in Latin America. Furthermore, to make an emphasis on the differentiation from the existing paper kitchen towels, the company made the slogan, "Scott^® washable kitchen towel." This slogan was designed to expand the familiar product image of convenient paper towels to water-resistance. As a result, consumers show the changes in usage behavior of paper towels and apply them for more various purposes such as cleaning the decks and tables. This change results in the rapid sales increase of "Scott^® washable kitchen towel."

• Economic and Environmental Geology
• /
• v.5 no.4
• /
• pp.187-209
• /
• 1972

Drilling position is one of the most important factors affecting on the blasting effects. There has been many reports on several blasting factors of burn-cut by Messrs. Brown and Cook, but in this study the author tried to compare drilling positions of burn-cut to pyramid-cut, and also to correlate burn-cut effects of drilling patterns, not being dealt by Prof. Ito in his theory, which emphasized on dynamical stress analysis between explosion and free face. According to former theories, there break out additional tensile stress reflected at the free face supplemented to primary compressive stress on the blasting with one-free-face. But with these experimented new drilling patterns of burn-cut, more free faces and nearer distance of each drilling holes make blasting effects greater than any other methods. To promote the above explosive effect rationary, it has to be considered two important categories under-mentioned. First, unloaded hole in the key holes should be drilled in wider diameter possibly so that it breaks out greater stress relief. Second, key holes possibly should have closer distances each other to result clean blasting. These two important factors derived from experiments with, theories of that the larger the dia of the unloaded hole, it can be allowed wider secondary free faces and closes distances of each holes make more developed stress relief, between loaded and unloaded holes. It was suggested that most ideal distance between holes is about 4 clearance in U. S. A., but the author, according to the experiments, it results that the less distance allow, the more effective blasting with increased broken rock volume and longer drifted length can be accomplished. Developed large hole burn-cut method aimed to increase drifting length technically under the above considerations, and progressive success resulted to achieve maximum 7 blasting cycles per day with 3.1m drifting length per cycle. This achievement originated high-speed-drifting works, and it was also proven that application of Metallic AN-FO on large hole burn-cut method overcomes resistance of one-free-face. AN-FO which was favored with low price and safety handling is the mixture of the fertilizer or industrial Ammonium-Nitrate and fuel oil, and it is also experienced that it shows insensible property before the initiation, but once it is initiated by the booster, it has equal explosive power of Ammonium Nitrate Explosives (ANE). There was many reports about AN-FO. On AN-FO mixing ratio, according to these experiments, prowdered AN-FO, 93.5 : 6.5 and prilled AN-FO 94 : 6, are the best ratios. Detonation, shock, and friction sensities are all more insensitive than any other explosives. Residual gas is not toxic, too. On initation and propagation of the detonation test, prilled AN-FO is more effective than powered AN-FO. AN-FO has the best explosion power at 7 days elapsed after it has mixed. While AN-FO was used at open pit in past years prior to other conditions, the author developed new improved explosives, Metallic AN-FO and Underwater explosive, based on the experiments of these fundmental characteristics by study on its usage utilizing AN-FO. Metallic AN-FO is the mixture of AN-FO and Al, Fe-Si powder, and Underwater explosive is made from usual explosive and AN-FO. The explanations about them are described in the other paper. In this study, it is confirmed that the blasting effects of utilizing AN-FO explosives are very good.