• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1081-1085
• /
• 2002

A modeling is developed to predict the isolation performance of sound barrier systems under the sound pressure radiated from excited by point impact. The predicted results are compared with the measured results obtained by using APAMAT II. This instrument provides a combination of structure-borne noise and air-borne noise, which corresponds to rolling noise, by applying the excitation system projected steel balls against the steel sheet.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2594-2600
• /
• 2020

A gamma camera system using radionuclide has a functional imaging technique and is frequently used in the field of nuclear medicine. In the gamma camera, it is extremely important to improve the image quality to ensure accurate detection of diseases. In this study, we designed a blind-deconvolution framework after a noise-reduction algorithm based on a non-local mean, which has been shown to outperform conventional methodologies with regard to the gamma camera system. For this purpose, we performed a simulation using the Monte Carlo method and conducted an experiment. The image performance was evaluated by visual assessment and according to the intensity profile, and a quantitative evaluation using a normalized noise-power spectrum was performed on the acquired image and the blind-deconvolution image after noise reduction. The result indicates an improvement in image performance for gamma camera images when our proposed algorithm is used.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.7-13
• /
• 2021

Machine vision is a technology that helps the computer as if a person recognizes and determines things. In recent years, as advanced technologies such as optical systems, artificial intelligence and big data advanced in conventional machine vision system became more accurate quality inspection and it increases the manufacturing efficiency. In machine vision systems using deep learning, the image quality of the input image is very important. However, most images obtained in the industrial field for quality inspection typically contain noise. This noise is a major factor in the performance of the machine vision system. Therefore, in order to improve the performance of the machine vision system, it is necessary to eliminate the noise of the image. There are lots of research being done to remove noise from the image. In this paper, we propose an autoencoder based machine vision system to eliminate noise in the image. Through experiment proposed model showed better performance compared to the basic autoencoder model in denoising and image reconstruction capability for MNIST and fashion MNIST data sets.

• 한국컴퓨터정보학회논문지
• /
• 제19권5호
• /
• pp.37-42
• /
• 2014

본 연구의 목적은 170 dB 수준의 충격 소음원에서 주파수별 귀마개의 차음성능을 확인하고, 주파수 특성과 패턴 형상을 분석하는데 있다. 충격 소음에서의 Combat Arm Earplug와 3M Form types 1100 Earplug의 주파수별 귀마개 차음성능을 산출하였다. 차음성능을 확인하기 위해서 B&K Head and Torso Simulator와 Ear Simulator를 제작하여 충격 소음원의 주파수별로 차음성능을 비교하였다. 기존의 연구들은 충격 소음원이라 할지라도 대부분 140 dB 수준의 고충격 소음원이였으나, 본 연구는 그보다 더 높은 수준의 충격 소음원이라는 특징을 가지고 있다. 연구결과, 주파수별 충격소음의 차음효과는 평균 28.58 dB 인 것으로 나타났다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.171-174
• /
• 1998

A class of non-parametric detectors based on quantized m-dimensional noise sample space is introduced. Due to assuming the nongaussian noise as a channel model, it is not easy to design the detector through estimating the unknown functional form of noise; instead equiprobably partitioning m-dimensional noise into a finite number of regions, using a VQ and quantiles obtained by RMSA algorithm is used in this paper to design detectors. To show the comparison of performance between single sample detector and system suggested here, Monte-Carlo simulations were used. The effect of signal pulse shape on the receiver performance is analyzed too.

• 한국전자파학회논문지
• /
• 제9권4호
• /
• pp.552-559
• /
• 1998

Conducted noise in power line contains both the common mode(CM) and differential mode(DM) noise. These two modes of noise are caused by different noise sources and paths. Therefore, CM/DM noise must be deal with individually in EMI filter. In this paper the technique to separate power line noise is presented, which can be used to measure both the CM and the DM noise from total generated noise. Also, noise-separator is designed and experimental results showed 30 dB above of separation performance in 10 kHz~10 MHz.

• Journal of information and communication convergence engineering
• /
• 제5권4호
• /
• pp.300-304
• /
• 2007

Wireless sensor networks represent a new and exciting communication paradigm which could have multiple applications in future wireless communication. Therefore, performance analysis of such a wireless sensor network paradigm is needed in complex wireless channel. Wireless networks could be an important means of providing ubiquitous communication in the future. In this paper, the BER performance of uniform distributed wireless sensor networks is evaluated in non-Gaussian noise channel. Using an analytical approach, the impact of Av. BER performance relating the coherent BPSK system at the end of a multi-hop route versus the spatial density of sensor nodes and impulsive noise parameters A and $\Gamma$ is evaluated.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.967-972
• /
• 2001

An axial fan design code, called iDesignFan$^{TM}$, was developed. In this code, three major loss models were used to predicted the aerodynamic performance of a fan. The overall sound pressure level, predicted from steady blade loading, is also used as an input parameter from the third loop of the designing process to acquire most silent fan for the given aerodynamic performance parameters. With this kind of inverse design concept used in this code, the period of designing a fan, which has given aerodynamic performance with minimal acoustic noise, is significantly shortened. The experimental results of a prototype fan, designed by this code, showed that aerodynamic and acoustic performance of an axial fan is reasonably well predicted. Thus, one can design/develop an axial fan in a short time by using the code.e.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.457-462
• /
• 2011

The sidewall of the HEMU-400x consists of two parts. One is the multi-layered structure including aluminium extruded panel and the other is the double glazed window. When the train runs in a tunnel, the equivalent sound insulation performance of the side wall significantly influences the internal noise levels. In aspect of the sound insulation strategy, it is important to make two parts have similar performance. In this study, the intensity sound transmission loss (ITL) is measured on the specimens of the two parts. Mass law deviation (MLD) is considered in order to compare the sound insulation performance of the two parts in respect of the weight. Contribution of each part to the sound insulation is analyzed and the sound insulation strategy is investigated to reduce the interior noise.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.78-82
• /
• 2004

The cross-flow fan which is used for air-conditioner indoor units were studied experimentally. The recent trend shows that the room air-conditioners need to be good-looking. According to the visual design concepts the intake regions of the fan can vary, which leads to the loss of the performance and the increase of the noise of the fan. In order to optimize the performance of the fan and minimize the aerodynamic noise for the system, the performance characteristics and the noise of the cross-flow fan have been investigated at the various conditions of the intake region of the unit.