• Carbon letters
• /
• v.12 no.2
• /
• pp.81-84
• /
• 2011

A novel experimental set-up allowing quantitative determination of the adsorption capacity of gas molecules on a surface under high-vacuum conditions is introduced. Using this system, the toluene adsorption capacities of various carbon nanostructures were determined. We found that for a give surface area, the adsorption capacities of toluene of multi-walled carbon nanotubes and nanodiamonds were higher than that of activated carbon, which is widely used as an adsorbent of volatile organic compounds. The adsorption of toluene was reversible at room temperature.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.663-666
• /
• 2009

본 논문에서는 폭발법에 의해 합성된 나노다이아몬드의 열분해 및 연소특성에 대해 조사하였다. 나노 다이아몬드의 열분해 및 연소는 열중량 분석장치를 이용하여 측정하였으며, 소성된 나노다이아몬드의 표면 및 결합구조는 XRD, FT-IR, SEM-EDAX를 이용하여 측정하였다. 열분해 조건에서 나노다이아몬드는 $105{\sim}210^{\circ}C$와 $400^{\circ}C$ 부근에서 2중 피크가 나타난다. 또한 연소분위기하에서는 $420^{\circ}C$와 $490^{\circ}C$에서 2중 피크가 나타난다.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.667-670
• /
• 2009

수용액에 첨가된 나노다이아몬드는 용매상 내에서 안정된 분산 특성을 나타낸다. 이런 분산 특성은 일정 시간동안 유지되지만, 농도와 시간에 따라 분산특성이 떨어지면서 일부 다이아몬드들의 침강이 나타난다. 이런 분산 및 침강 특성을 정량화하기 위하여 나노다이몬드 수용액의 흡광특성을 비교 분석하였다. 파장에 따른 나노다이아몬드의 흡광도는 농도에 상관없이 350 nm까지 상승하다가 점차적으로 완만하게 감소하고 있다. 또한 300nm 파장에 대한 흡광도는 나노다이아몬드의 농도에 따라 거의 직선적으로 증가하는 것으로 나타났다.

• Journal of the Korean Magnetic Resonance Society
• /
• v.20 no.4
• /
• pp.114-120
• /
• 2016

Nitrogen vacancy-centered diamond has recently emerged as a promising material for various applications due to its special optical and magnetic properties. In particular, its applications as a fluorescent biomarker with small toxicity, magnetic field and electric field sensors have been a topic of great interest. Recent review (R. Schirhagl et al 2014) introduced those applications using single NV-center in nanodiamond. In this minireview, I introduce the rapidly emerging DNP (Dynamic Nuclear Polarization) field using optically-pumped NV center in diamonds. Additionally, the possibility of exploiting the optically-pumped NV center for polarization transfer source, which will produce a profound impact on room temperature DNP, will be discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.34 no.4
• /
• pp.253-258
• /
• 2017

This paper presents a numerical study on the thermal characteristics of a milling process of titanium alloy with nanofluid minimum-quantity lubrication (MQL). The computational fluid dynamics (CFD) approach is introduced for establishing the numerical model for the nanofluid MQL milling process, and estimated temperatures for pure MQL and for nanofluid MQL using both hexagonal boron nitride (hBN) and nanodiamond particles are compared with the temperatures measured by thermocouples in the titanium alloy workpiece. The estimated workpiece temperatures are similar to experimental ones, and the model is validated.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.59.1-59.1
• /
• 2015

In the Linford group at Brigham Young University we have recently developed three new sets of materials for three different areas of separations science: thin layer chromatography (TLC), high performance liquid chromatography (HPLC), and solid phase microextraction (SPME). First, via microfabrication we have grown patterned carbon nanotube (CNT) forests on planar substrates that we have infiltrated with inorganic materials such as silicon nitride. The coatings on the CNTs are conformal and typically deposited in a process like low pressure chemical vapor deposition. The resulting materials have high surface areas, are porous, and function as effective separation devices, where separations on our new TLC plates are typically significantly faster than on conventional devices. Second, we used the layer-by-layer (electrostatically driven) deposition of poly (allylamine) and nanodiamond onto carbonized poly (divinylbenzene) microspheres to create superficially porous particles for HPLC. Many interesting classes of molecules have been separated with these particles, including various cannabinoids, pesticides, tricyclic antidepressants, etc. Third, we have developed new materials for SPME by sputtering silicon onto cylindrical fiber substrates in a way that creates shadowing of the incoming flux so that materials with high porosity are obtained. These materials are currently outperforming their commercial counterparts. Throughout this work, the new materials we have made have been characterized by X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectrometry, scanning electron microscopy, transmission electron microscopy, etc.

• Journal of Powder Materials
• /
• v.20 no.6
• /
• pp.479-486
• /
• 2013

In the present work, physicochemical treatments were introduced for de-aggregation and stable dispersion of detonation nanodiamonds (DND) in polar solvents. The DNDs in water exhibited a particle size of 138 nm and high dispersion stability without particular treatment. However, the DNDs in ethanol were severely aggregated to several micrometers in size and showed poor dispersion stability with time. To break down aggregates of DNDs and enhance the dispersion stability of them in ethanol, mechanical force and chemical surfactant were introduced as functions of zirconia ball size, kind of surfactant and amount of surfactant added. From the analyses of average particle size and Turbiscan results, it was suggested that the size of DNDs in ethanol can be reduced by only mechanical force; however, the DNDs were re-aggregated due to high surface activity. The long-term dispersion stability can be achieved by applying mechanical force to break down the aggregates of DNDs and by preventing re-aggregation of them using proper surfactant.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.3
• /
• pp.109-115
• /
• 2020

In this study, polycrystalline diamond was synthesized by chemical vapor deposition (CVD). Diamond films were deposited on a-plane sapphire substrates while changing the concentration of methane for hydrogen (CH₄/H₂), and the concentrations of methane were 0.25, 0.5, 1, 2, 3 and 4 vol%, respectively. Crystallinity and nucleation density according to changes in methane concentration were investigated. At this time, the discharge power, vacuum pressure, and deposition time were kept constant. In order to deposit polycrystalline diamond, the sapphire substrate was etched with sulfuric acid and hydrogen peroxide (ratio 3:7), and the sapphire surface was polished for 30 minutes with 100 nm-sized nanodiamond particles. The deposited diamond thin film was analyzed by a scanning electron microscope (SEM), a Raman spectra, Atomic force microscope (AFM) and an X-ray diffractometer (XRD). By controlling the ratio of methane to hydrogen and performing appropriate pre-treatment conditions, a polycrystalline diamond thin film having excellent crystallinity and nucleation density was obtained.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.17-23
• /
• 2022

Recently, several studies are being conducted to achieve a curvature of 180° or more for the edge of the display glass. The thermocompression molding process is applied to the manufacture of curved glass, and high hardness G5 graphite is used as the mold material to withstand the impact applied to the mold. G5 graphite has high hardness and strong brittleness, which makes tool wear and surface damage easy during machining. Therefore, the demand for diamond-coated tools with good mechanical properties is increasing in the G5 machining field. In this study, the optimal cutting conditions and machinability of a nanodiamond (NCD) coated ball end mill being developed by a tool manufacturer were analyzed and evaluated. For this purpose, the same test was performed on the microdiamond (MCD) coated ball end mill and compared together. In summary, the machinability of MCD and NCD coated tools showed better cutting performance at a cutting speed of 282 m/min, a feed rate of 1,400 mm/min, and a radial depth of cut of 0.08 to 0.1 mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.718-723
• /
• 2016

The use of the scroll compressor in the air conditioning of medium-sized vehicles has increased because of its low torque fluctuation, high energy efficiency and low noise. In addition, the main components of the compressor have been changed from steel to aluminum to reduce its weight, following studies on the constituent materials. The processing precision of the fixed scroll and orbiting involute scroll wrap of the scroll compressor must be below $10{\mu}m$. To ensure this, the surface roughness and contour tolerance are measured. To improve the hardness of the orbiting scrolls using aluminum subjected to anodizing treatment and as the base material, we used a sealing treatment and measured the resulting characteristics. The aluminum materials were made of an Al-Mg-Cu based alloy including small amounts of Ni, Fe, and Zn. The surface roughness was less than $3{\mu}m$ and the processing accuracy was within $10{\mu}m$. Also, the hardness of the nanodiamonds with CNTs used in the sealing treatment was more than 450. This was found to improve the hardness of the material by 50% or more compared to the water sealing treatment and there was little difference between the use of carbon nanotubes and nanodiamonds as sealing materials.