• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.143-146
• /
• 2003

A finite element based on the efficient higher order zig-zag theory with multiple delaminations Is developed to refine the predictions of frequency and mode shapes. Displacement field through the thickness are constructed by superimposing linear zig-zag field to the smooth globally cubic varying field. The layer-dependent degrees of freedom of displacement fields are expressed in terms of reference primary degrees of freedom by applying interface continuity conditions including delaminated interfaces as well as free hounding surface conditions of transverse shear stresses. Thus the proposed theory is not only accurate but also efficient. This displacement field can systematically handle the number, shape, size, and locations of delaminations. Throught the dynamic version of variational approach, the dynamic equilibrium equations and variationally consistent boundary conditions are obtained. Through the natural frequency analysis and time response analysis of composite plate with multiple delaminations, the accuracy and efficiency of the present finite element are demonstrated. The present finite element is suitable in the predictions of the dynamic response of the thick composite plate with multiple delaminations.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1650-1652
• /
• 1998

This paper describes characteristics of electric field waveforms associated with multiple-lightning discharges. The electric field measurment system. consists of hemi-sphere antenna 30 cm in diameter. integrator and data acquisition device. The frequency bandwidth is from 200 Hz to 1.56 MHz, and the sensitivity is 0.96 mV/V/m. The detected electric field signal is digitized every 500 ns with the resolution of 12-bit and the length of 2 kilowords and is registered at a personal computer. Also parameters of the electric fields associated with multiple-lightning discharges are ststistically analyzed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.2
• /
• pp.559-575
• /
• 2023

3D human pose estimation is widely applied in various fields, including action recognition, sports analysis, and human-computer interaction. 3D human pose estimation has achieved significant progress with the introduction of convolutional neural network (CNN). Recently, several researches have proposed the use of multiview approaches to avoid occlusions in single-view approaches. However, as the number of cameras increases, a 3D pose estimation system relying on a CNN may lack in computational resources. In addition, when a single host system uses multiple cameras, the data transition speed becomes inadequate owing to bandwidth limitations. To address this problem, we propose a distributed real-time 3D pose estimation framework based on asynchronous multiple cameras. The proposed framework comprises a central server and multiple edge devices. Each multiple-edge device estimates a 2D human pose from its view and sendsit to the central server. Subsequently, the central server synchronizes the received 2D human pose data based on the timestamps. Finally, the central server reconstructs a 3D human pose using geometrical triangulation. We demonstrate that the proposed framework increases the percentage of detected joints and successfully estimates 3D human poses in real-time.

• Journal of the Korean Society of Safety
• /
• v.39 no.1
• /
• pp.114-122
• /
• 2024

This study aimed to identify the multiple mediation effects of job satisfaction and job commitment on the relationships between job stress and workers' safety behavior in terms of compliance and participation, in which the multiple mediation effects are a hybrid of parallel and serial mediating relationships. The multiple mediation model was analyzed using the bootstrapping method through the PROCESS macro tool in SPSS. The results showed that job stress negatively affects job satisfaction, job commitment, and workers' safety behavior, and the relationship between job stress and safety behavior is mediated by both job satisfaction and job commitment. The serial mediation effects of job satisfaction and job commitment were also found to be statistically significant in the regression relationship between job stress and safety behavior. Further analysis of the compliance and participation subdimensions of safety behavior showed similar results. Specifically, the serial mediation effects of job satisfaction and job commitment on participation and compliance behavior were further supported; however, the mediation effect of job satisfaction was not significant, whereas that of job commitment did remain significant. Further research is needed to determine if the mediation effect of job satisfaction found in this study can be extended and generalized to workers in various fields and industries.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2806-2820
• /
• 2024

Accurate reconstruction of radiation field and path planning are very important for the safety of operators in the process of dismantling nuclear facilities. Based on radial basis function (RBF) interpolation algorithm, this paper discussed the application of inverse multiquadric radial basis Function (IMRBF) interpolation method to the reconstruction of gamma radiation field, and proved the feasibility of reconstructing a radiation field with multiple γ sources. The average relative errors of IMRBF interpolation results were 4.28% and 8.76%, respectively, for the experimental scenarios with single and double gamma sources. After comparing the consistency between the simulated scene and the experimental scene, IMRBF method and Cubic Spline method were respectively used to reconstruct the gamma radiation field by Geant4 simulation data. The results showed that the interpolation accuracy of IMRBF method was superior to that of Cubic Spline method. Further, more RBF interpolation algorithms were used to reconstruct the multi-γ source radiation field, and then the Probabilistic Roadmap (PRM) algorithm was used to optimize the human walking path in the radiation field reconstructed by different interpolation methods. The optimal paths in radiation fields generated by multiple interpolation methods were compared. The results herein contribute to a comprehensive understanding of RBF interpolation methods in reconstructing γ radiation fields and their application in optimizing paths in radiation environments. The insights may provide valuable information for decision-making in radiation protection during the decommissioning of nuclear facilities.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.395-403
• /
• 2008

In this paper, we present the analysis of the fact that normalization and types of citation fields have an effect to the citation matching. Citation matching indicates the series of grouping process for the citation records referring to the same paper. The citation matching combines the comparison results of citation fields, and determines which citation records are the same. For the citation field comparison in the citation matching phase, studies on the normalization and types of citation fields are needed. But they are relatively insufficient when compared with the studies on citation matching methods. In this research, we showed that the citation matching performance was affected by the normalization and types of citation fields. Additionally, we also analyzed the combination of normalized multiple fields. According to the experimental result, the citation field had the overall performance improvement through a normalization, and the performance mode differently showed up at the citation field type.

• The KIPS Transactions:PartA
• /
• v.9A no.3
• /
• pp.271-280
• /
• 2002

In this paper, the input-output interconnection method of the multiple-valued signal processing circuit using Perfect Shuffle technique and Kronecker product is discussed. Using this method, the circuit design method of the multiple-valued Reed-Muller Expansions (MRME) which can process the multiple-valued signal easily on finite fields GF$(p^m)$ is presented. The proposed input-output interconnection methods show that the matrix transform is an efficient and the structures are modular. The circuits of multiple-valued signal processing of MRME on GF$(p^m)$ design the basic cells to implement the transform and inverse transform matrix of MRME by using two basic gates on GF(3) and interconnect these cells by the input-output interconnection technique of the multiple-valued signal processing circuits. The proposed multiple-valued signal processing circuits that are simple and regular for wire routing and possess the properties of concurrency and modularity are suitable for VLSI.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1284-1296
• /
• 2004

In order to investigate effects of anisotropic fiber packing on stresses in composites, a Volume Integral Equation Method is applied to calculate the elastostatic field in an unbounded isotropic elastic medium containing multiple orthotropic inclusions subject to remote loading, and a Mixed Volume and Boundary Integral Equation Method is introduced for the solution of elastostatic problems in unbounded isotropic materials containing multiple anisotropic inclusions as well as one void under uniform remote loading. A detailed analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out for square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively. Also, an analysis of stress fields at the interface between the isotropic matrix and the central orthotropic inclusion is carried out, when it is assumed that a void is replaced with one inclusion adjacent to the central inclusion of square, hexagonal and random packing of orthotropic cylindrical inclusions, respectively, due to manufacturing and/or service induced defects. The effects of random orthotropic fiber packing on stresses at the interface between the isotropic matrix and the central orthotropic inclusion are compared with the influences of square and hexagonal orthotropic fiber packing on stresses. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with multiple orthotropic inclusions and one void, it will be established that these new methods are very accurate and effective for investigating effects of general anisotropic fiber packing on stresses in composites.

• Journal of Digital Convergence
• /
• v.16 no.3
• /
• pp.497-504
• /
• 2018

The purpose of this study was to investigate the relationship between college students' work hope, career attitude maturity and career decision-making self-efficacy. For this, correlation analysis, variance analysis and multiple regression analysis were conducted using 299 data collected from 8 universities in the metropolitan area, Yeongnam, Honam, Gangwon and Chungcheong provinces. As a result of correlation analysis between work hope and career variables, there was a positive correlation between r=.64 and .73 in each sub-factor. After performing a variance analysis to explore the differences in work hope between gender, grades and major fields, there were no gender and grade differences found, but there were significant differences between major fields. Also, as a result of multiple regression analysis, it was found that work hope affecting career attitude maturity was pathways, and in career decision-making self-efficacy, agency, pathways thinking, and goal were influenced. On the analysis result, the limitations and implications of this study were discussed using college students' work hope scale.

• Journal of KIEE
• /
• v.11 no.1
• /
• pp.32-40
• /
• 2001

This paper presents the detailed statistics on radiation field signatures associated with multiple-intracloud lightning discharges. A transient signal recording system was used to measure the electric and magnetic fields produced by lightning flashes. The measurements were made in th summers of 1995 through 1999, and the location of the observation station was in Inchon on the coast of the Yellow Sea in Korea(37$^{\circ}$25'N, 126$^{\circ}$ 39'E). Most of lightning flashes typically contains between two and five strokes. The individual intracloud stork radiation fields were the bipolar pulse. On the average, the ratio of the peak of the second stroke to the first stroke peak was 75.1$\pm$40.1% for the negative, and a fraction of the subsequent stroke peaks were higher than the first stroke peak. The greater the number of the subsequent stroke order, less time separations between strokes were produced. The mean of the depth of the dip was 81.2$\pm$27.9% for the positive polarity and 75.9$\pm$24.4% for the negative. The depth of the dip increased for the positive bipolar pulses and decreased for the negative as the number of the stroke order increased.