• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.41-52
• /
• 2005

Memory reference instruction caused by cache miss is the critical factor that limits the processing power of processor. Cache prefetching technique is an effective way to reduce the latency due to memory access. However, excessively aggressive prefetch leads to cache pollution and finally to cancel out the advantage of prefetch. In this study, an active prefetch filtering scheme is introduced which dynamically decides whether to commence prefetching after referring a filtering table to reduce the cache pollution due to unnecessary prefetches. For the precision filtering, an evicted address referencing scheme has been proposed where the filter directly compares the current prefetch address with previous unnecessary prefetch addresses stored in filtering table. Moreover, a small sized exclusive prefetch cache has been introduced to increase the amount of eviction of unnecessarily prefetched addresses to enhance the accuracy of dynamic filtering. The exclusive prefetch cache also prevents useful demand data from being pushed out by prefetched data, while the evicted address direct referencing scheme enables the prefetch cache to keep most of useful prefetch data within its small size. Experimental results from commonly used general and multimedia benchmarks show that the average cache miss ratio has been decreased by $13.3{\%}$ by virtue of enhanced filtering accuracy compared with conventional schemes.

• The KIPS Transactions:PartB
• /
• v.11B no.6
• /
• pp.653-660
• /
• 2004

Object-oriented analysis-synthesis coding (OOASC) subdivides each image of a sequence into a number of moving objects and estimates and compensates the motion of each object. It employs a motion parameter technique for estimating motion information of each object. The motion parameter technique employing gradient operators requires a high computational load. The main objective of this paper is to present efficient motion parameter estimation techniques using the hierarchical structure in object-oriented analysis-synthesis coding. In order to achieve this goal, this paper proposes two algorithms : hybrid motion parameter estimation method (HMPEM) and adaptive motion parameter estimation method (AMPEM) using the hierarchical structure. HMPEM uses the proposed hierarchical structure, in which six or eight motion parameters are estimated by a parameter verification process in a low-resolution image, whose size is equal to one fourth of that of an original image. AMPEM uses the same hierarchical structure with the motion detection criterion that measures the amount of motion based on the temporal co-occurrence matrices for adaptive estimation of the motion parameters. This method is fast and easily implemented using parallel processing techniques. Theoretical analysis and computer simulation show that the peak signal to noise ratio (PSNR) of the image reconstructed by the proposed method lies between those of images reconstructed by the conventional 6- and 8-parameter estimation methods with a greatly reduced computational load by a factor of about four.

• Journal of KIISE:Information Networking
• /
• v.27 no.2
• /
• pp.109-122
• /
• 2000

As the full-motion videos in MPEG are widely available nowadays, an editor that could easily edit such kind of media data is required to develop various multimedia applications. In order to concatenate and apply a transition effect to two video streams encoded in MPEG, they should be decoded first since there are dependencies in the frames in MPEG-encoded video stream. Since this decode-edit-encode process requires a huge amount of computing/storage resources, a new editing scheme that could apply various transition effects to MPEG video streams directly while keeping the quality of video data is strongly required. This paper proposes a new editing scheme that could apply three transition effects (such as fade-in, fade-out, and dissolve) to MPEG video streams in a compressed domain. In the proposed scheme, an extension of previous method in which the frames are partially decompressed and transition effects are applied is adopted for I- and P-frames. In addition, a new processing scheme for B-frame that could apply the transition effects in DCT domain directly using an approximation of motion compensation based on the motion vector to reference frames. Since this processing scheme could apply the transition effects in a compressed domain directly, the editing process could be speed-up about $3{\sim}4$ times faster than previous decode-edit-encoding method while keeping the quality of video data as good as the source data. The proposed scheme could be used to build a software-only MPEG video editing system that helps to edit MPEG video data even on a low-cost desk-top computer.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.529-538
• /
• 2003

The speedy development of the world-wide web is rapidly growing the internet-based tools for the remote instruction. In interchanging and expressing the information of one another on the web, it is produced through the form of HTML(Hyoertext Text Markup Language). However, the structural disadvantage of the HTML is becoming to require a powerful XML(eXtensible Markup Language) which can store all the sphere of data, and transform them into another form. Nevertheless, because the powerful XML(eXtensible Markup Language). However necessary that XML standard should be applied appropriately. Because existing lecture data of cyber education sites cannot be shared, the users should passively use only the functions offered by cyber school. To solve the problem of this limit, in this study, the standardized data structure for XML is defined, and system model for processing between the server and the client is provided. By storing the lecture data of cyber education sites as XML on the web, stored data came to be reused without changing on any site. In the view of Users, they could used the Internet service with equipment that they want at any place and any time. To control any kinds of CK\LMS(Cyber Lecture Management System) for Administrator and Users, we offered a variety of Multimedia applications and an easy interface and built a new style of CLMS. Therefore, by strong and extracting the data related with the virtual education of the secondary school through the form of XML, for the effective interchange and sharing of the information, maximum utilization of the information can be achieved.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.539-550
• /
• 2003

As the service of mobile internet has been expended, student users are increase. The computers have been widely used in a education field as the teaching tool by improvement of the multimedia contents processing and user interface. The English learning using the computers in the restricted education environment provides motivations and effective learning to learners, but still have some problem such as teaching and evaluating without consideration for differences of individual levels. In order to solve the problems and take the advantages, we propose the intelligent tutoring system for english learning with mobile technology. Overcoming limitations of the mobile environment and using proper treacher's roles,. We have applied the conventional estimation method of the intellectual learner level for students. Also, we have proposed the diagnostic function in order to determine the method of teaching-learing and item disposition that each leaner prefers. Then we have designed and implemented the expert module, providing the feedback for teaching, of the intelligent turoring system for mobile english learning. This system will be able to support the interaction between teachers and students and replace some roles of teacher in the mobile english learning.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.8A
• /
• pp.820-829
• /
• 2006

IP-based design methodology has been popularly employed for SoC design to reduce design complexity and to cope with time-to-market pressure. Due to the request for high performance of current mobile systems, embedded SoC design needs a multi-processor to manage problems of high complexity and the data processing such as multimedia, DMB and image processing in real time. Interface module for communication between system buses and processors are required, since many IPs employ different protocols. High performance processors require interface module to minimize the latency of data transmission during read-write operation and to enhance the performance of a top level system. This paper proposes an automatic interface generation system based on FSM generated from the common protocol description sequence of a bus and an IP. The proposed interface does not use a buffer which stores data temporally causing the data transmission latency. Experimental results show that the area of the interface circuits generated by the proposed system is reduced by 48.5% on the average, when comparing to buffer-based interface circuits. Data transmission latency is reduced by 59.1% for single data transfer and by 13.3% for burst mode data transfer. By using the proposed system, it becomes possible to generate a high performance interface circuit automatically.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.768-773
• /
• 2020

In large-scale land development for the rational use and management of national land resources, the use of geospatial information is essential for the efficient management of projects. Recently, drone LiDAR (Light Detection And Ranging) has attracted attention as an effective geospatial information construction technique for large-scale development areas, such as housing site construction and open-pit mines. Drone LiDAR can be classified into a method using SLAM (Simultaneous Localization And Mapping) technology and a GNSS (Global Navigation Satellite System)/IMU (Inertial Measurement Unit) method. On the other hand, there is a lack of analytical research on the application of drone LiDAR or the characteristics of each method. Therefore, in this study, data acquisition, processing, and analysis using SLAM and GNSS/IMU type drone LiDAR were performed, and the characteristics and utilization of each were evaluated. As a result, the height direction accuracy of drone LiDAR was -0.052~0.044m, which satisfies the allowable accuracy of geospatial information for mapping. In addition, the characteristics of each method were presented through a comparison of data acquisition and processing. Geospatial information constructed through drone LiDAR can be used in several ways, such as measuring the distance, area, and inclination. Based on such information, it is possible to evaluate the safety of large-scale development areas, and this method is expected to be utilized in the future.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10a
• /
• pp.677-680
• /
• 2000

웹이 등장하면서 지금까지 인터넷 상에서 텍스트와 이미지를 이용하여 정보를 표현하고 전달하는 방법이 가장 많이 사용되어왔다. 그러나 웹 관련 기술의 비약적인 발달과 네트워크 속도의 증가 및 인터넷의 급속한 보급으로 단순한 텍스트와 이미지 중심의 HTML 문서를 이용한 정보의 전달이 아닌 멀티미디어 데이터를 이용한 정보의 표현과 전달이 점차 증대되고 있다. 이에 따라 멀티미디어 데이터를 전송하기 위한 스트리밍 프로토콜도 등장하였다. 최근에는 컴퓨터의 성능 증가 및 네트워크 속도의 증가(초고속 통신 서비스의 보급)에 의해 멀티미디어 데이터의 전송이 가능하게됨으로써 기존의 공중파나 CATV 방송국의 형태 지니고 인터넷 상에서 실시간 생방송 서비스와 VOD(Video On Demand) 서비스를 제공하는 인터넷 방송국이 급속하게 생겨나고 있다.[11] 인터넷 방송은 동영상과 오디오의 실시간 전달을 가능하게 하는 멀티미디어 스트리밍 기술과 멀티미디어를 실시간으로 전송할 수 있는 실시간 전송 프로토콜을 기반으로 발전하고 있다. 인터넷 상에서 멀티미디어 스트리밍 서비스를 하는 대부분의 인터넷 방송은 스트리밍 서버로서 RealNetworks사의 RealSystem과 Microsoft사의 WMT(Windows Media Technologies)를 사용하고 있다. 본 논문은 Real Server와 WMT의 비교 분석을 통해 실시간 전송 프로토콜을 지원하고, 멀티미디어 스트리밍 기술을 지원하는 자바를 기반으로 한 분산 서버 구조의 스트리밍 서버, 서버간의 부하를 제어하는 미들웨어, 멀티미디어 스트림을 재생할 수 있는 클라이언트를 설계하고 구현한다. 방법에 대해서 자세히 살펴보고 실제 SQL Server 7.0 환경에서 구축된 공간 엔진 및 OLE DB 제공자 컴포넌트의 구현 예에 대하여 살펴볼 것이다. 혈액내방사선 조사량이 안전용량 범위(200rad)에 속하며 48시간 후 체내잔류량은 서양인과 큰 차이가 없었다.비출현의 소견을 보이는 악성종양 환자의 골 신티그람 53개중 44개 (83.0%)에서 척추 및 늑골에 미만성, 또는 다발성 침습이 관찰되었다. 또 골전이 부위를 두개골, 척추, 견대부, 늑골, 골반, 사지의 근위부 장골의 6개 부위로 나누어 분석할 경우 49개(92.5%)에서 3부위 이상에 전이가 발견되었고, 35개(66.0%)에서 4부위 이상에 전이가 발견되었으며, 5부위 이상, 6개 부위에 모두 전이가 발견된 것은 각각 20개 (37 7%), 11개(20.8%)이었다. 이상의 성적으로 보아 악성종양 환자의 골 신피그라피에서 신장 영상의 비출현은 종양의 광범위한 골전이를 간접적으로 시사하는 소견으로 생각된다. 여러 악성종양중 전립선암에서 신장 영상 비출현의 빈도가 가장 높았으며, 특히 위암에서 골전이 및 신장 영상 비출현의 빈도가 높음은 주목할 만한 것이라 하겠다.출한 결과 인,규소 증가와 자가영양성 미소플랑크톤(ANP)증가에 미치는 요인이 해안과 외해에서 동일하게 가장 큰 설명력을 보였다. N:P 비도 해안에서 36.4, 외해에서 32.6을 보이고 있어 인이 상당히 부족한 것으로 나타났다. 따라서 조사해역은 인이 식물플랑크톤 성장에 중요한 제한요인으로 작용하고 있다고 판단된다.의 회전. 전위력의 강도, 적용시점, 그리고 키, 체중등의 신체적 요인 등이 있으나 능숙한 기계사

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.21-24
• /
• 2001

For very large multimedia traffic to be supported successfully in wireless network environment, it is necessary to provide Quality-of-Service(QoS) guarantees between mobile hosts(clients). In order to guarantee the Qos, we have to keep the call blocking probability below target value during handoff session. However, the QoS negotiated between the client and the network may not be guaranteed due to lack of available channels for traffic in the new cell, since mobile clients should be able to continue their on-going sessions. In this paper we propose a efficient load-balancing algorithm based on the adaptive bandwidth reservation scheme for enlarging available channels in a cell. We design a new method to predict the mobility of clients using MPT(mobility profile table). This method is then used to reserve a part of bandwidths for handoff calls to its adjacent cells and this reserved bandwidth can be used for handoff call prior to new connection requests. If the number of free channels is also under a low threshold value, our scheme use a load-balancing algorithm with a adaptive bandwidth reservation. In order to evaluate the performance of our algorithm, we measure the metrics such as the blocking probability of new calls and dropping probability of handoff calls, and compare with other existing schemes.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.2
• /
• pp.531-542
• /
• 1997

In this paper,we propose applicable methodology using simple scenarios for the architecture and its procedure of sibnalling at the NNI for B-ISDN in Korea.By the recent technologies,the flexible and intergrated networks of the future are designed, and the infrastructure hardware and software of those networks are sdsigned based on the modular concepts.Also the ATM-based B-ISDN must be able to support the broadband transmission function for providing various services with diverse bandwidths such as multimedia serivce and the function for controlling services and bandwidth is necessaty.Currently,the trquirements at the NNI for B-ISDN in korea atr based on the network mode connection type which is connection setup strucuture.They must show the upper/lower layer conformance to have the flexibility in new services and guarantee the interoperability between the network functions.But,network functions and protocol specifications described in this paper are limity to the first stage target system in korea.Therefore,we present the modular architecture which is corresponding to the B-ISUP of HAN/B-ISDN with those characteristics.Currently applicable architecture and procedure for B-ISUP and the functions of expandable modular architecture are also proposed.