• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.501-508
• /
• 2001

Free vibration analysis of multi-delaminated composite beam-columns subjected to axial compression load is performed in the present study. In order to investigate the effects of multi-delaminations on the natural frequency and elastic buckling load of multi-delaminated beam-columns, the general kinematic continuity conditions are derived from the assumption of constant slope and curvature at the multi-delamination tip. Characteristic equation of multi-delaminated beam-column is obtained by dividing the global multi-delaminated beam-columns into segments and by imposing recurrence relation from the continuity conditions on each sub-beam-column. The natural frequency and elastic buckling load of multi-delaminated beam-columns according to the incremental load of axial compression, which is limited to the maximum elastic buckling load of sound laminated beam-column, are obtained. It is found that the sizes, locations and numbers of multi-delaminations have significant effect on natural frequency and elastic buckling load, especially the latter ones.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.523-534
• /
• 2002

본 논문에서는 축방향 압축하중을 받는 다퐁간분리된 적층 보-기둥의 자유진동과 좌팔에 대한 해석을 수행하였다. 다층간분리된 적층 보-기둥의 고유진동수와 탄성 좌굴 하중에 대한 층간분리의 영향을 조사하기 위해 층간분리의 양단에서 기울기와 곡률이 일정하다는 가정을 적용하여 일반적인 운동학적 연속 조건을 유도하였다. 전체 다층간분리된 보-기둥을 부분으로 분할하고, 연속조건에 따른 반복관계를 각 하부 보-기둥에 부과함으로써 다층간분리된 보-기둥의 특성방정식을 구하였다. 축방향 증분 압축 하중에 따른 다층간분리된 보-기둥의 고유진동수와 탄성 좌굴 하중을 구하였으며 이는 손상되지 않은 적층 보-기둥의 최대 탄성 좌굴 하중에 한정된다 연구를 통하여 층간분리의 크기, 위치, 수가 고유진동수와 특히 탄성 좌굴 하중에 큰 영향을 미치는 것을 알 수 있었다.

• 한국전산구조공학회논문집
• /
• 제14권4호
• /
• pp.469-479
• /
• 2001

본 연구에서는 다층 층간분리된 적층보의 자유진동해석을 수행하였다. 적층보에 존재하는 다층 층간분리가 고유진동수에 미치는 영향을 고찰하기 위해 층간분리단에서의 연속조건을 유도하고, 층간분리된 각각의 분할보의 경계에서 유도된 연속조건을 이용하여 진동수 방정식을 유도하였다. 이론해석결과의 검증을 위해 범용 프로그램을 이용한 유한요소해석을 수행하였으며, 서로 잘 부합됨을 보였다. 고유진동수 변화는 다층 층간분리의 크기와 위치 및 형태에 따라 변하였다. 얻어진 결과로부터 다층 층간분리가 적층보의 동적특성에 미치는 민감도와 층간분리의 위치와 크기를 탐지하는데 활용될 수 있는 가능성을 제시하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 가을 학술발표회 논문집
• /
• pp.25-32
• /
• 2002

Free vibration analysis of radialiy multi-delaminated beams with through-the-width multi-delamination is performed in the present study. The multiple delaminations are considered to be in a radial manner through the thickness from the top surface of the beam. The natural frequencies of the radially multi-delaminated beams are calculated from a new algorithm that is based on the single compound delaminated beam model. That is, beams with radial multi-delaminations are regarded as the sum of a single compound delamlnated beam that is the single sub-delaminated beam from the top surface of global beam. Each result of frequency equation for the single delaminated beam with unknown boundary conditions obtained through continuity conditions Is updated to the next one, With these sequential operations, the final frequency equation of radially multi-delaminated beams is obtained for both ends boundary conditions of global beam. The numerical results carried out for the beams are compared with those of some references to give the reliance on the proposed algorithm and to investigate the effects of the shape, number, size of multi-delaminations on the natural frequency. Compared with the other previously presented model, the proposed algorithm is more flexible in modeling and formulating as the total array size of frequency equation is always four by four. Therefore, the proposed algorithm will reduce the effort of user in formulating the physical model to the numerical model.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 가을 학술발표회논문집
• /
• pp.83-89
• /
• 2000

Dynamic characteristics of multi-delaminated composite beams are presented in this work. In order to investigate the effects of sizes, locations and types of delaminations on composite beams, the general kinematic governing equations are derived and solved by dividing the delaminated beam and imposing the continuity conditions into each sub-beam The results show dynamic behaviors are varied according to the sizes, types and locations of delaminations through the laminated composite beams. It is shown that the effects of delaminations on the dynamic characteristics of composite beams could be used to detect their sizes, types and locations from the results.

• 한국강구조학회 논문집
• /
• 제13권3호
• /
• pp.233-244
• /
• 2001

본 연구에서는 다층 층간분리된 복합보의 휨강성 감소를 고찰하였다. 휨강성 감소를 평가하기 위해서 이론해석을 수행하였다. 층간분리가 복합보에 휨강성 감소에 주는 영향을 고찰하기 위해서 지배운동방정식이 유도되었고, 층간분리된 각각의 분할보는 연속조건을 이용한 반복관계를 이용하여 구해졌다. 복합적층보에 층간분리가 여러 층에서 발생한 경우에 대해 다양한 적층순서와 여러 가지 형태의 층간분리 형상으로 모델링하여 결과를 비교하였다. 다층 층간분리가 존재하는 적층복합보의 휨강성을 평가하는데 있어서 본 연구는 유용하게 활용될 수 있다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.25-32
• /
• 2004

In this proposed work new finite element model for multi-delaminated plates is proposed. In the current analysis procedures of multi-delaminated plates, plate element based on Mindlin plate theory is used in order to obtain accurate results of out-of-plane displacement of thick plate. And for delaminated region, plate element based on Kirchhoff plate theory is considered. To satisfy the displacement continuity conditions, displacement vector based on Kirchhoff theory is transformed to displacement of transition element. The numerical results show that the effect of delaminations on the modal parameters of delaminated composites plates is dependent not only on the size, the location and the number of the delaminations but also on the mode number and boundary conditions. Kirchhoff based model have higher natural frequency than Mindlin based model and natural frequency of the presented model is closed to Mindlin based model.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 가을 학술발표회 논문집
• /
• pp.229-236
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection. which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the buckling problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The accuracy of the present element is demonstrated in the prediction of buckling loads and buckling modes of shells with multiple delaminations. The present shell element should serve as a powerful tool in the prediction of buckling loads and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.69-72
• /
• 2004

A new three-node triangular shell element based on higher order zig-zag theory is developed for laminated composite shells with multiple delaminations. The present higher order zig-zag shell theory is described in a general curvilinear coordinate system and in general tensor notation. All the complicated curvatures of surface including twisting curvatures can be described in an exact manner in the present shell element because this element is based on geometrically exact surface representation. The displacement field of the proposed finite element includes slope of deflection, which requires continuity between element interfaces. Thus the nonconforming shape function of Specht's three-node triangular plate bending element is employed to interpolate out-of-plane displacement. The present element passes the bending and twisting patch tests in flat surface configurations. The developed element is evaluated through the eigenvalue problems of composite cylindrical shells with multiple delaminations. Through the numerical examples it is demonstrated that the proposed shell element is efficient because it has minimal degrees of freedom per node. The present shell element should serve as a powerful tool in the prediction of natural frequency and modes of multi-layered thick laminated shell structures with arbitrary-shaped multiple delaminations.

• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.183-190
• /
• 2003

Major device failures such as die cracking, interfacial delamination and warpage in flip chip packages are due to excessive heat and thermal gradients- There have been significant researches toward understanding the thermal performance of electronic packages, but the majority of these studies do not take into account the combined effects of thermo-mechanical interactions of the different package constituents. This paper investigates the thermo-mechanical performance of flip chip package constituents based on the finite element method with thermo-mechanically coupled elements. Delaminations with different lengths between the silicon die and underfill resin interfaces were introduced to simulate the defects induced during the assembly processes. The temperature gradient fields and the corresponding stress distributions were analyzed and the results were compared with isothermal case. Parametric studies have been conducted with varying thermal conductivities of the package components, substrate board configurations. Compared with the uniform temperature distribution model, the model considering the temperature gradients provided more accurate stress profiles in the solder interconnections and underfill fillet. The packages with prescribed delaminations resulted in significant changes in stress in the solder. From the parametric study, the coefficients of thermal expansion and the package configurations played significant roles in determining the stress level over the entire package, although they showed little influence on stresses profile within the individual components. These observations have been implemented to the multi-board layer chip scale packages (CSP), and its results are discussed.