• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4545-4553
• /
• 2014

Mobile GPU has led to the rapid development of smart phone graphic technology. Most recent smart phones are equipped with high-performance multi-core GPU. How a multi-core mobile GPU can be utilized efficiently will be a critical issue for improving the smart phone performance. On the other hand, most current research has focused on a single-core mobile GPU; studies of multi-core mobile GPU are rare. In this paper, the job scheduling patterns and the efficiency of multi-core mobile GPU are analyzed. In the profiling result, despite the higher number of GPU cores, the total processing time required for certain graphics applications were increased. In addition, when GPU is processing for 3D games, a substantial amount of overhead is caused by communication between not only the CPU and GPU, but also within the GPUs. These results confirmed that more active research for multi-core mobile GPU should be performed to optimize the present mobile GPUs.

• Journal of KIISE
• /
• v.44 no.3
• /
• pp.223-231
• /
• 2017

In this paper, we study the performance of recently popular multi-core systems in mobiles. Previous research on the multi-core performance usually focused on the desktop PC. However, there is enough scope to further analyze heterogeneous multi-core systems. Therefore, by extending homogeneous multi-core systems, we analyze the heterogeneous multi-core systems using Size Interval Task Allocation (SITA) for job allocation, and Shortest Remaining Processing Time (SRPT) scheduling, for each individual core. We propose a new computational method regarding the cutoff point, which is crucial in analyzing SITA, by calculating the sojourn time. This facilitate easy and accurate calculation of the sojourn time. We further confirm our analysis through the ESESC simulator that provides actual measurements.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.5
• /
• pp.385-393
• /
• 2021

This study proposes a multi-core-based controller design for an ESC(Electronic Stability Control) system in an automotive multi-core processor. Considering the architectures of an automotive multi-core processor and an ESC system, the overall execution time has been optimized for multi-core platforms. The function module assignment, synchronization between cores, and memory assignment for core-dependent variables in automotive multi-core systems are evaluated. The ESC controller comprising five function modules is used herein. Based on the proposed design, the single-core controller is extended to multi-core controllers. Using multi-core optimization methods, such as function module assignment, semaphore, interrupt awakening, and variable assignment over cores, the ESC system is redesigned to a multi-core controller. Experimental results reveal that the execution time for the multi-core processor is reduced by 59.7% compared with that for the single-core processor.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.375-381
• /
• 2012

In this paper, we present an implementation of Viola-Jones algorithm in a multi-core SoC by using skin color information and a parallel processing method. In order to reduce unnecessary operations and improve the detection speed, we adopted a face detection algorithm based on skin color and deleted background image. The algorithm is functionally divided into several parts taking account of the size and the dependency so that the divided functions can be proceeded in parallel. Experiment results in SoC with built-in Cortex-A9 multi core show that it is about 1.8 times faster than the existing algorithm which is not divided.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.10
• /
• pp.2479-2496
• /
• 2013

Increasing demand for Full High-Definition (FHD) video and Ultra High-Definition (UHD) video services has led to active research on high speed video processing. Widespread deployment of multi-core systems has accelerated studies on high resolution video processing based on parallelization of multimedia software. Even if parallelization of a specific decoding step may improve decoding performance partially, such partial parallelization may not result in sufficient performance improvement. Particularly, entropy decoding has often been considered separately from other decoding steps since the entropy decoding step could not be parallelized easily. In this paper, we propose a parallelization technique called Integrated Multi-Threaded Parallelization (IMTP) which takes parallelization of the entropy decoding step, with other decoding steps, into consideration in an integrated fashion. We used the Simultaneous Multi-Threading (SMT) technique with appropriate thread scheduling techniques to achieve the best performance for the entire decoding step. The speedup of the proposed IMTP method is up to 3.35 times faster with respect to the entire decoding time over a conventional decoding technique for H.264/AVC videos.

• The KIPS Transactions:PartA
• /
• v.18A no.1
• /
• pp.1-10
• /
• 2011

Physical modeling has been widely used for sound synthesis since it synthesizes high quality sound which is similar to real-sound for musical instruments. However, physical modeling requires a lot of parameters to synthesize a large number of sounds simultaneously for the musical instrument, preventing its real-time processing. To solve this problem, this paper proposes a single instruction, multiple data (SIMD) based multi-core processor that supports real-time processing of sound synthesis of gayageum which is a representative Korean traditional musical instrument. The proposed SIMD-base multi-core processor consists of 12 processing elements (PE) to control 12 strings of gayageum in which each PE supports modeling of the corresponding string. The proposed SIMD-based multi-core processor can generate synthesized sounds of 12 strings simultaneously after receiving excitation signals and parameters of each string as an input. Experimental results using a sampling reate 44.1 kHz and 16 bits quantization show that synthesis sound using the proposed multi-core processor was very similar to the original sound. In addition, the proposed multi-core processor outperforms commercial processors(TI's TMS320C6416, ARM926EJ-S, ARM1020E) in terms of execution time ($5.6{\sim}11.4{\times}$ better) and energy efficiency (about $553{\sim}1,424{\times}$ better).

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.9
• /
• pp.21-31
• /
• 2014

Singular value decomposition (SVD) has been widely used to identify unique features from a data set in various fields. However, a complex matrix calculation of SVD requires tremendous computation time. This paper improves the performance of a representative one-sided block Jacoby algorithm using a two-dimensional (2D) multi-core system. In addition, this paper explores an optimal multi-core system by varying the number of processing elements in the 2D multi-core system with the same 400MHz clock frequency and TSMC 28nm technology for each matrix-based one-sided block Jacoby algorithm ($128{\times}128$, $64{\times}64$, $32{\times}32$, $16{\times}16$). Moreover, this paper demonstrates the potential of the 2D multi-core system for the one-sided block Jacoby algorithm by comparing the performance of the multi-core system with a commercial high-performance graphics processing unit (GPU).

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.250-253
• /
• 2011

Chip manufacture nowadays turned their attention from accelerating uniprocessors to integrating multiple cores on a chip. Moreover desktop graphic hardware is now starting to support general purpose computation. Desktop users are able to use multi-core CPU and GPU as a high performance computing resources these days. However exploiting parallel computing resources are still challenging because of lack of higher programming abstraction for parallel programming. The 2-dimensional discrete cosine transform (2D-DCT) algorithms are most computational intensive part of JPEG encoding. There are many fast 2D-DCT algorithms already studied. We implemented several algorithms and estimated its runtime on multi-core CPU and GPU environments. Experiments show that data parallelism can be fully exploited on CPU and GPU architecture. We expect parallelized DCT bring performance benefit towards its applications such as JPEG and MPEG.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.4
• /
• pp.251-257
• /
• 2016

The multi-core technology has become pervasive in embedded systems. An implementation of the Doppler Beam Sharpening algorithm that improves the azimuth resolution by using doppler frequency shift is possible only in multi-core environment because of the amount of calculation. In this paper, we design of multi-core architecture for a real time implementation of DBS algorithm. And based on designed structure, we produce a DBS image on P4080 board.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.706-709
• /
• 2005

Despite geometrical balanced runner system, filling imbalances between cavity to cavity have always been observed in multi-cavity injection mold. These filling imbalances are results from non-symmetrical shear rate distribution within melt as it flows through the runner system. It has been possible to decrease filling imbalance by optimizing processing conditions, but it has not completely eliminated this phenomenon during the injection molding processing. This paper presents a solution of these filling imbalances by using runner core pin which creates a symmetrical shear distribution within runner and the effects on filling imbalance when modifying a shape of runner core pin. As a result of using runner core pin, a remarkable improvement in reducing filling imbalance was confirmed. In addition we investigated how filling imbalances were affected by shape of runner core pin.