• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.157-166
• /
• 2013

PURPOSES : This study is to analyze expected effect of a accident decrease when motorcycle safety inspection is introduced. METHODS : Based on the literature review of effect of 4-wheel vehicle inspection, probability of occurring accidents among defective motorcycles are calculated by using the number of estimated defective motorcycles and accidents resulting from defects of motorcycles. Then, the number of decreased accidents which is resulting from eliminating defects of motorcycles by safety inspection is estimated by using probability of occurring accidents among defective motorcycles. RESULTS : If the ratio of eliminating defects of motorcycles is 95% after motorcycle safety inspection, the effects of accident decrease of motorcycle safety inspection are analyzed from 2005 to 2008. As a result, 46,292 defective motorcycles are repaired and 1,376 accidents are prevented when the probability of occurring accidents among defective motorcycles is 2.97%. CONCLUSIONS : This study suggests the expected effect of motorcycle safety inspection is that the inspection can prevent 1,376 motorcycle accidents. However, the number of preventing motorcycle accidents are small, compared with the total number of motorcycle accidents because there are limitations to investigate the causes of defective motorcycle accidents. A more precise analysis of the expected effect of motorcycle inspection is possible when a systematic investigation of the causes of the accidents is implemented.

• 대한가정학회지
• /
• 제43권6호
• /
• pp.27-35
• /
• 2005

The purpose of this study was to develop motorcycle wear with built-in airbag protection for enhanced comfort and fit. Based on the survey results, a motorcycle jacket was designed using. Aauto CAD. This study concentrated on the wearing comfort comparison of the motorcycle jacket developed from this research with that of and foreign goods. To evaluate the wearing comfort, 3 types of motorcycle jackets were used. The results of this study were as follows. : From an Analysis of the differences in wearing comfort, the motorcycle jacket developed proved to be more convenient than the 2 types of foreign motorcycle jackets in terms of the standing and handle grip posture. This effect was due to the curved pattern of the neckline part of the airbag. The air pressure of the airbag must be improved.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.87-95
• /
• 2005

Most of the motorcycle engines have used carburetors in the fuel system, because of its simple structure and reliability but the fuel economy and the emissions of those engines are bad when we compared with automobile engines .To meet with the tighten emission regulations and the higher requirements for fuel economy, the application of the carburetor on the motorcycle engines would be limited. Therefore, it is important to develope a ECU control system for motorcycle engines. Since the fuel injection system is expensive, it is necessary to decrease the cost of ECU system for motorcycle engines, but the accuracy of the ECU control system should be increased as high as possible. In this paper, we studied about the AFS characteristics of motorcycle engine controled by indirect method.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.165-170
• /
• 2016

Recently, IoT(Internet of Things) technology is widely applied in not only our everyday lives but also in industry, medical field and security system. NFC system, the basis of IoT, is in the spotlight which can be an alternative solution of a anti-theft system for motorcycle as they basically have practicality and security issues. Anti-theft system for motorcycle using the NFC smart devices based on RFID has been proposed. because Progress of Smart Device If someone get the Key for motorcycle theft, he can be easily stolen motorcycle. We thought about the concept of NFC security devices as a wireless key and automatic solenoid valve for setting the lock and unlock module. In this study, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4719-4725
• /
• 2013

본 논문에서는 ASM을 이용하여 전기 이륜차 장치에 대한 모델기반 설계 기법을 제시하였다. 실제, 전기 이륜차의 시제품 제작 이전에 전기 이륜차의 최적화와 동력을 예측하기 위해서는 신뢰성을 갖는 해석이 필요하다. 과거의 전기 이륜차 연구는 미시적 관점보다는 거시적 관점에서 실시되었다. 그러나, 본 연구에서는 전기 이륜차 핵심 부품에 대한 상세 해석을 실시하였다. 본 논문에서는 이론과 실험해석의 에러 비율이 2.3%에 달하는 양호한 결과를 얻을 수 있었다. 이 같은 상세 해석을 통하여, 전기 이륜차의 해석 정확도를 향상시키고 설계인자 해석이 가능하게 되었다. 또한, 본 연구에서는 전기 이륜차가 직면하고 있는 Fail safety에 대한 효과적 방법을 제시하였다.

• 대한공업교육학회지
• /
• 제32권1호
• /
• pp.73-92
• /
• 2007

이 연구의 목적은 이륜차 안전교육을 위한 ICT 교수-학습 자료를 개발하는데 있다. 이륜차 운전의 역동성과 관계되는 물리적인 주제는 기술과 과학의 결합과 같은 통합학습을 통해 중 고등학생들의 안전의식 증가를 위해 소개하였다. 본 연구는 결론은 다음과 같이 요약할 수 있다. (1) 기초 물리 이론을 사용하여 이륜차 ICT 교수-학습 과정안을 교수-학습 계획안과 수업 활동 안으로 나누어 개발하였다. (2) 플래쉬 애니매이션과 동영상은 물리지식을 이륜차의 운전기술에 적용하기 위해서 개발하였다. 이것은 중 고등학교 학생들의 이륜차 운전에 관한 태도를 향상하기 위한 것이다. (3) 웹에서 제공되는 이륜차 안전 운전 부록을 통해 중 고등학교 학생들이 이륜차 운전에 관한 인지적 영역 측면을 강화할 수 있도록 하였다. (4) 웹을 통한 이륜차 ICT 교수-학습 자료를 제공하여, 학습자와 교수자가 게시판을 통해 상호작용이 이루어지도록 하였다.

• 한국수소및신에너지학회논문집
• /
• 제23권4호
• /
• pp.373-381
• /
• 2012

To determine the performance characteristics of motorcycle engine using biogas for practical use, the intake system of a 110 cc motorcycle engine is properly modified to operate with biogas as a fuel. Biogas is a potentially renewable fuel for replacing gasoline in future, but it has high percentage of $CO_2$ that could lead to slow the burning rate of biogas-air mixture and cause instability in combustion. Thus, the performance characteristics of biogas-fueled motorcycle engines could be different from those of gasoline motorcycle engines. In this paper, the important parameters of performance characteristics (such as: power output, thermal efficiency, fuel consumption, exhaust emission,${\cdots}$) of biogas-fueled motorcycle engine are studied and estimated with change of engine speed and load. The obtained results when operating with biogas are used to compare with that of gasoline fuel under the same operating conditions. Engine speed in the experimental is changed from 1500 rpm (idle-mode) up to 3500 rpm by a step of 500 rpm. Engine load is changed from zero to maximum load with the help of an exciting voltage device from generator-type dynamometer. The experimental results show that the tested engine operated with richer biogas-air mixture than that of gasoline-air mixture under the same test conditions. Biogas-fueled engine gives a higher fuel consumption and lower thermal efficiency under the same power output. Brake thermal efficiency of biogas engine is found to be about 3% lower than gasoline-fueled motorcycle engine for whole range of speed. Exhaust emission of biogas-fueled motorcycle engine (such as: CO, HC) is found to be lower than the limitation level of the emission standards of Vietnam for motorcycle engines (CO <4.5% HC <1200 ppm).

• Tribology and Lubricants
• /
• 제25권2호
• /
• pp.102-107
• /
• 2009

The thermal deformation volume of motorcycle break disk was studied using a disk-on-pad type friction tester. Thermal deformation volume of motorcycle break disk have an effect on the frictional factor such as applied load, sliding speed, sliding distance and number of ventilated disk hole. However, it is difficult to know the mutual relation of these factors on thermal deformation volume. In this study, the thermal deformation volume with ANSYS workbench are obtained by application of temperature from mechanical test. From this study, the result was shown that the motorcycle break disk with ventilated hole 3 have the most excellent thermal deformation characteristics. The regression equation with frictional factors which have a trust rate of 95% for prediction of thermal deformation volume of motorcycle break disk was composed.

• 자동차안전학회지
• /
• 제9권4호
• /
• pp.55-60
• /
• 2017

This paper presents the motorcycle inspection standards of electrical system, frame & body, lights and speedometers. 187 real-world motorcycles are visually and mechanically inspected according to the developed inspection standards. The non-compliance rate of inspection standards of the lights is 23.7% and main causes are damage, tinting, painting and coloration of head-lamp, number plate lamp, front-rear position lights, stop lamp and direction indicators of motorcycles. Also, 28.4% of motorcycles are dropped from the luminous intensity inspection standard. Motorcycle electrical system cannot be visually inspected. The motorcycle inspections standards are improved reflecting 187 cases of real-world motorcycle inspection results.

• 자동차안전학회지
• /
• 제8권4호
• /
• pp.18-23
• /
• 2016

The objective of this study is to present the inspection standards of motorcycle brake system affecting motorcycle traffic accident. The inspection standards of motorcycle brake system recommended by CITA (International Motor Vehicle Inspection Committee) are studied. The brake performance for preventing the traffic accident is assessed by the brake efficiency. Considering the KMVSS (Korean Motor Vehicle Safety Standards) and the inspection standards of CITA, United Kingdom and Japan, the brake performance in the inspection standards of motorcycle is suggested. It is recommended that the efficiency of independent front and rear brakes are 40% and 27%, respectively. It is recommended that the efficiency of combined front and rear brakes is 50%.