• Journal of the Korea Society for Simulation
• /
• v.25 no.4
• /
• pp.77-84
• /
• 2016

This paper proposes a methodology for creating a function based reliability prediction model. Although, there are various works for reliability prediction, one of the features of their research is that the research is based on hardware-centered reliability prediction. Reliability is often defined as the probability that a device will perform its intended function, under operating condition, for a specified period of time, there is a profound irony about reliability prediction problem. In this paper, we proposed four-phase modeling procedure for function-centered reliability prediction. The proposed modeling procedure consists of four models; 1) structure block model, 2) function block model, 3) device model, and 4) reliability prediction model. We performed function-centered reliability prediction for electronic ballast using the proposed modeling procedure and MIL-HDBK-217F which is the military handbook for reliability prediction of electronic equipment.

• Journal of information and communication convergence engineering
• /
• v.14 no.2
• /
• pp.115-121
• /
• 2016

Currently there is a lack of literature on SPICE-level models of double-gate (DG) tunnel field-effect transistors (TFETs). A DG TFET compact model is presented in this work that is used to develop a SPICE model for DG TFETs implemented with Verilog-A language. The compact modeling approach presented in this work integrates several issues in previously published compact models including ambiguity about the use of tunneling parameters A_k and B_k, and the use of a universal equation for calculating the surface potential of DG TFETs in all regimes of operation to deliver a general SPICE modeling procedure for DG TFETs. The SPICE model of DG TFET captures the drain current-gate voltage (I_ds-V_gs) characteristics of DG TFET reasonably well and offers a definite computational advantage over TCAD. The general SPICE modeling procedure presented here could be used to develop SPICE models for any combination of structural parameters of DG TFETs.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.121-128
• /
• 2008

This paper describes the modeling and autopilot design procedure of a Blended Wing-Body(BWB) UAV. The BWB UAV is a tailless design that integrates the wing and the fuselage. This configuration shows some aerodynamic advantages of lower wetted area to volume ratio and lower interference drag as compared to conventional type UAV. Also, BWB UAV may be increase payload capacity and flight range. However, despite of these benefits, this type of UAV presents several problems related to flying qualities, stability, and control. In this paper, the detailed modeling procedure of BWB UAV and stability analysis results using the linearized model at trim condition are represented. Finally, we designed the autopilot of BWB UAV based on a simple control allocation scheme and evaluated its performance through nonlinear simulation.

• Structural Engineering and Mechanics
• /
• v.30 no.4
• /
• pp.481-500
• /
• 2008

In this paper, a model updating technique in dynamics is used to identify elastic properties for pultruded GFRP-Glass Fiber Reinforced Plastic framed structural systems used in civil construction. Traditional identification techniques for composite materials may be expensive, while this alternative approach allows to identify several properties simultaneously, with very good precision. Furthermore, the procedure of a non-destructive type has a relatively simple implementation. Properties describing the mechanical behavior for beam and shell finite element modeling are identified. The used formulation is based on the minimization of eigensolution residuals. Important points concerning model updating procedures have been observed, such as the particular vibrational behavior of the test structure, the modeling strategies and the optimal placement of the sensors in the experimental procedure. Results obtained by experimental tests show the efficiency of the proposed procedure.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1369-1379
• /
• 2015

In this study, a progressive damage modeling is developed to predict functional failure pressure of GRP pipes subjected to internal hydrostatic pressure. The modeling procedure predicts both first-ply failure pressure and functional failure pressure associated with the weepage phenomenon. The modeling procedure is validated using experimental observations. The random parameters attributed to the filament winding production process are identified. Consequently, stochastic simulation is conducted to investigate the influence of induced inconsistencies on the functional failure pressures of GRP pipes. The obtained results are compared to realize the degree to which random parameters affect the performance of the pipe in operation.

• IE interfaces
• /
• v.9 no.2
• /
• pp.129-141
• /
• 1996

Recently, the tire mold of a passenger car is made almost via aluminum casting, and it is necessary to prepare a master model of the tire for the casting. Because of the geometrical feature of tire, as well known, the master model must be machined by a 5-axis NC machine. The paper proposes a procedure to model and machine the master model. The approach includes (a) transformation of 2D drawing of tire into 3D geometry, (b) modeling surfaces of tire, and (c) inverse kinematics of a 5-axis NC machine. An implementation of the proposed procedure is also presented.

• Journal of Korean Society of Transportation
• /
• v.1 no.1
• /
• pp.28-42
• /
• 1983

In recent years, significant advances have been made enabling travel demand analysis and network design methods to be used as increasingly realistic evaluation tools. What has been lacking is the integration of travel demand analysis with network design models. This paper reviews some of advanced (integrated) modeling approaches and presents future research directions of integrated modeling system. To design urban transportation networks, it is argued that the travelers' free choice of mode, destination and route should be introduced into transportation network design procedure instead of assuming that trips from a zone to a workplace are fixed or deriving them in a normative procedure to achieve hypothetical system optima.

• Clinics in Shoulder and Elbow
• /
• v.26 no.3
• /
• pp.252-259
• /
• 2023

Background: The purpose of this study was to identify demographics and risk factors associated with unplanned 30-day readmission and reoperation following open procedures for shoulder instability and examine recent trends in open shoulder instability procedures. Methods: The American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database was queried using current procedural terminology (CPT) codes 23455, 23460, and 23462 to find patients who underwent shoulder instability surgery from 2015 to 2019. Independent sample Student t-tests and chi-square tests were used in univariate analyses to identify demographic, lifestyle, and perioperative variables related to 30-day readmission following repair for shoulder instability. Multivariate logistic regression modeling was subsequently performed. Results: In total, 1,942 cases of open surgical procedures for shoulder instability were identified. Within our study sample, 1.27% of patients were readmitted within 30 days of surgery, and 0.85% required reoperation. Multivariate logistic regression modeling confirmed that the following patient variables were associated with a statistically significant increase in the odds of readmission: open anterior bone block/Latarjet-Bristow procedure, being a current smoker, and a long hospital stay (all P<0.05). Multivariate logistic regression modeling confirmed statistically significant increased odds of reoperation with an open anterior bone block or Latarjet-Bristow procedure (P<0.05). Conclusions: Unplanned 30-day readmission and reoperation after open shoulder instability surgery is infrequent. Patients who are current smokers, have an open anterior bone block or Latarjet-Bristow procedure, or a longer than average hospital stay have higher odds of readmission than others. Patients who undergo an open anterior bone block or Latarjet-Bristow procedure have higher odds of reoperation than those who undergo an open soft-tissue procedure. Level of evidence: III.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.5
• /
• pp.496-510
• /
• 2016

Simulation technology is a type of shipbuilding product lifecycle management solution used to support production planning or decision-making. Normally, most shipbuilding processes are consisted of job shop production, and the modeling and simulation require professional skills and experience on shipbuilding. For these reasons, many shipbuilding companies have difficulties adapting simulation systems, regardless of the necessity for the technology. In this paper, the data model for shipyard production simulation model generation was defined by analyzing the iterative simulation modeling procedure. The shipyard production simulation data model defined in this study contains the information necessary for the conventional simulation modeling procedure and can serve as a basis for simulation model generation. The efficacy of the developed system was validated by applying it to the simulation model generation of the panel block production line. By implementing the initial simulation model generation process, which was performed in the past with a simulation modeler, the proposed system substantially reduced the modeling time. In addition, by reducing the difficulties posed by different modeler-dependent generation methods, the proposed system makes the standardization of the simulation model quality possible.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.532-541
• /
• 2018

Decision support systems are a key focus of research on developing control rooms to aid operators in making reliable decisions and reducing incidents caused by human errors. For this purpose, models of complex systems can be developed to diagnose causes or consequences for specific alarms. Models applied in safety systems of complex and safety-critical systems require rigorous and reliable model building and testing. Multilevel flow modeling is a qualitative and discrete method for diagnosing faults and has previously only been validated by subjective and qualitative means. To ensure reliability during operation, this work aims to synthesize a procedure to measure model performance according to diagnostic requirements. A simple procedure is proposed for validating and evaluating the concept of multilevel flow modeling. For this purpose, expert statements, dynamic process simulations, and pilot plant experiments are used for validation of simple multilevel flow modeling models of a hydrocyclone unit for oil removal from produced water.