DOI QR코드

DOI QR Code

Characterization of elastic properties of pultruded profiles using model updating procedure with vibration test data

  • Received : 2008.04.08
  • Accepted : 2008.08.28
  • Published : 2008.11.10

Abstract

In this paper, a model updating technique in dynamics is used to identify elastic properties for pultruded GFRP-Glass Fiber Reinforced Plastic framed structural systems used in civil construction. Traditional identification techniques for composite materials may be expensive, while this alternative approach allows to identify several properties simultaneously, with very good precision. Furthermore, the procedure of a non-destructive type has a relatively simple implementation. Properties describing the mechanical behavior for beam and shell finite element modeling are identified. The used formulation is based on the minimization of eigensolution residuals. Important points concerning model updating procedures have been observed, such as the particular vibrational behavior of the test structure, the modeling strategies and the optimal placement of the sensors in the experimental procedure. Results obtained by experimental tests show the efficiency of the proposed procedure.

Keywords

References

  1. AESOP - Analytical/Experimental Structural Optimization Platform. (2005), Version 5.0, Laboratoire de Mecanique Appliquee Raymond Chaleat - LMARC, Besancon - France
  2. Baere, I., Van Paepegem, W., Degrieck, J., Sol, H., Van Hemelrijck, D. and Petreli, A. (2007), "Comparison of different identification techniques for measurement of quasi-zero Poisson's ratio of fabric-reinforced laminates", Composites: Part A, 38, 2047-2054 https://doi.org/10.1016/j.compositesa.2007.04.012
  3. Bledzki, A.K., Kessler, A., Rikards, R. and Chate, A. (1999), "Determination of elastic constants of glass/epoxy unidirectional laminates by the vibration testing of plates", Compos. Sci. Technol., 59(13), 2015-2024 https://doi.org/10.1016/S0266-3538(99)00059-7
  4. Clarke, J.L. (1996), Structural design of polymer composites - Eurocomp Design Code and Handbook, E & FN SPON, London
  5. Cugnoni, J., Gmur, T. and Schorderet, A. (2007), "Inverse method based on modal analysis for characterizing the constitutive properties of thick composite plates", Comput. Struct., 85, 1310-1320 https://doi.org/10.1016/j.compstruc.2006.08.090
  6. Cunha, J. (2005), Caracterisation, modelisation, validation et optimisation des assemblages de structures de construction civile en materiaux composites, Rapport post-doctorat, LMARC - Universite de Franche-Comte
  7. Cunha, J. and Piranda, J. (1999), "Application of model updating techniques in dynamics for the identification of elastic constants of composite materials", Composites: Part B, 30, 79-85 https://doi.org/10.1016/S1359-8368(98)00050-X
  8. Daghia, F., Miranda, S., Ubertini, F. and Viola, E. (2007), "Estimation of elastic constants of thick laminated plates within a Bayesian framework", Comp. Struct., 80, 461-473 https://doi.org/10.1016/j.compstruct.2006.06.030
  9. Davalos, J.F. and Qiao, P. (1999), "A computational approach for analysis and optimal design of FRP beams", Comput. Struct., 70, 169-183 https://doi.org/10.1016/S0045-7949(98)00154-0
  10. Deobald, L.R. and Gibson, R.F. (1986). "Determination of Elastic Constants of Orthotropic Plates by a Modal Analysis/Rayleigh-Ritz Technique", Proceedings 4th IMAC, Los Angeles, February, 682-690
  11. Foltete, E. and Piranda, J. (2001), "Transforming complex eigenmodes into real ones based on an appropriation technique", J. Vib. Acoustics, 123, 92-97 https://doi.org/10.1115/1.1320811
  12. Frederiksen, P.S. (1994). "Estimation of elastic moduli in thick composite plates by inversion of vibrational data", Proceedings of the Second Int. Symposium on Inverse Problems, Paris, 111-118
  13. Frederiksen, P.S. (1998), "Parameter uncertainty and design of optimal experiments for the estimation of elastic constants", Int. J. Solids Struct., 35(12), 1241-1260 https://doi.org/10.1016/S0020-7683(97)00101-7
  14. Gagneja, S., Gibson, R.F. and Ayorinde, E.O. (2001), "Design of test specimens for the determination of elastic through-thickness shear properties of thick composites from measured modal vibration frequencies", Compos. Sci. Technol., 61, 679-687 https://doi.org/10.1016/S0266-3538(01)00006-9
  15. Ip, K.H., Tse, P.C. and Lai, T.C. (1998), "Material characterization for orthotropic shells using modal analysis and Rayleigh-Ritz models", Composites-Part B, 29, 397-409 https://doi.org/10.1016/S1359-8368(97)00037-1
  16. Lauwagie, T., Lambrinou, K., Patsias, S., Heylen, W. and Vleugels, J. (2008), "Resonant-based identification of the elastic properties of layered materials: application to air-plasma sprayed thermal barrier coatings", NDT&E Int., 41, 88-97 https://doi.org/10.1016/j.ndteint.2007.08.007
  17. Lee, C.R. and Kam, T.Y. (2006), "Identification of mechanical properties of elastically restrained laminated composite plates using vibration data", J. Sound Vib., 295, 999-1016 https://doi.org/10.1016/j.jsv.2006.01.054
  18. Matter, M., Gmur, T., Cugnoni, J. and Schorderet, A. (2007), "Improved modal characterization of the constitutive parameters in multilayered plates", Compos. Sci. Technol., 67, 1121-1131 https://doi.org/10.1016/j.compscitech.2006.05.016
  19. Pedersen, P. (1988), Laminates: analysis, sensitivity, optimal design, identification of material parameters. Notes for Lectures
  20. Shi, Y., Sol, H. and Hua, H. (2005), "Transverse shear modulus identification by an inverse method usingmeasured flexural resonance frequencies from beams", J. Sound Vib., 285, 425-442 https://doi.org/10.1016/j.jsv.2004.03.074
  21. Sol, H. (1986), Identification of Anisotropic Plate Rigidities using Free Vibration Data. PhD Thesis, Vrije Universiteit Brussel
  22. Sonti, S.S. (1992), Stress analysis of pultruded structural shapes. MSc Dissertation, West Virginia University

Cited by

  1. Effect of agglomerated zirconia-toughened mullite on the mechanical properties of giant cane fiber mat epoxy laminated composites vol.70, pp.2, 2019, https://doi.org/10.12989/sem.2019.70.2.233