• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.358-365
• /
• 2011

Recently, the LED(Light Emitting Diode) replacing incandescent light bulbs and fluorescent light has great attentions as a most promising candidate for the next generation lighting source due to its environment-friendly characteristics, long life and excellent efficiency. Moreover, since it is a semiconductor device which can convert the electric energy to visible light at a very high speed, it can also used as a communication device. Therefore, the VLC(Visible Light Communication) using the LED can perform the near field communication and lighting function at the same time without additional expenses. However, since the switching device of the conventional LED driver for VLC is operated in the linear region, there exist several drawbacks such as a poor power conversion efficiency and serious heat generation. On the other hand, since the proposed driver is operated in the on/off switching region, it features a higher efficiency and more improved heat generation. To verify the validity of the proposed LED driver, experimental results from a prototype of 20W rated LED driver applied to 3MHz bps broadcasting audio system are given.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.76-79
• /
• 2012

Satellite power system is critical for mission design and survival operation. Accordingly power conversion circuit has to stable design and verify for operation condition change (load, voltage, thermal condition). however, multi-stage make complicate for modeling and get all state solution. In this paper present all state solution for multi-stage converter by using Extended Describing Function(EDF) modelling. EDF modelling has merit to solve complex circuit but it has limit too. Because of fundamental approximation, EDF modeling is not match all topology. Consequently, we verify passible topology for EDF modeling and stable design multi-stage converter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.614-621
• /
• 2004

At present, the electronic document is being processed in WYSWYG mode. For this, a document is structured by the logical structure and the physical structure, and is presented by the markup language. After XML is announced, an application scope of the electronic document is extended from interchanging to searching. However, in point of output quality, a XML document image on a browser has lower quality than a general document image on desktop publishing. The reason is which output function of a browser has not capability for high quality printing. The W3C developed XSL-FO(XSL-formatting Object) for style sheet formatting and PDL(Page Description Language) as like Postscript is already developed and used widely. In this paper, we designed the Postscript-Converter to get a high quality document image by converting XSL-FO into Postscript format.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1113-1118
• /
• 2011

In order to evaluate the characteristics of solid-solid contact interfaces, reflection or transmission techniques involving normal-incidence longitudinal waves are generally used. However, these normal-incidence techniques are of limited use in field applications such as in the inspection of welded parts. The oblique-incidence ultrasonic technique may be an alternative for overcoming these problems. However, in this technique, the mode conversion at the contact interfaces should be taken into account along with the normal and tangential interface stiffness. In this study, we have suggested a theoretical model for obliqueincidence ultrasonic waves at the contact interfaces and analyzed their reflection and transmission characteristics. Experimental results showed that the measured reflection coefficient and second harmonic wave agreed well with the suggested theoretical model. Consequently, the oblique-incidence technique can be a promising method for evaluating the characteristics of the contact interfaces.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.445-461
• /
• 2019

The ultrasonic guided wave-based technique has become one of the most promising methods in non-destructive evaluation and structural health monitoring, because of its advantages of large area inspection, evaluating inaccessible areas on the structure and high sensitivity to small damage. To further advance the development of damage detection technologies using ultrasonic guided waves for the inspection of welded components in structures, the transmission characteristics of the ultrasonic guided waves propagating through welded joints with various types of defects or damage in steel plates are studied and presented in this paper. A three-dimensional (3D) finite element (FE) model considering the different material properties of the mild steel, high strength steel and austenitic stainless steel plates and their corresponding welded joints as well as the interaction condition of the steel plate and welded joint, is developed. The FE model is validated against analytical solutions and experimental results reported in the literature and is demonstrated to be capable of providing a reliable prediction on the features of ultrasonic guided wave propagating through steel plates with welded joints and interacting with defects. Mode conversion and scattering analysis of guided waves transmitted through the different types of weld defects in steel plates are performed by using the validated FE model. Parametric studies are undertaken to elucidate the effects of several basic parameters for various types of weld defects on the transmission performance of guided waves. The findings of this research can provide a better understanding of the transmission behaviour of ultrasonic guided waves propagating through welded joints with defects. The method could be used for improving the performance of guided wave damage detection methods.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.941-947
• /
• 2018

In general, capacitors have a large influence on the life of the system due to frequent charging and discharging. In this paper, we analyze the cause of the core failure of high voltage, high current HVDC sub-module film capacitor and analyze the precautions of the capacitor design and manufacturing process. First, the cause of the fault, the failure mode, and the effect are analyzed through the FMEA of the capacitor. To quantitatively evaluate the causes and effects of faults that have the greatest effect on the failure of a capacitor, a fault tree for the capacitor is presented and the failure rate is analyzed according to the design parameters and the driving conditions. It is verified that the main cause of capacitor failure is the capacitance change, and it is necessary to minimize the temperature rise, corona occurrence, electrode expansion, and insulation distance decrease during capacitor design and manufacturing process in order to reduce the failure rate of the capacitor.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.6
• /
• pp.265-271
• /
• 2018

DC-DC buck converter is a critical building block in the power management integrated circuit (PMIC) architecture for the portable devices such as cellular phone, personal digital assistance (PDA) because of its power efficiency over a wide range of conversion ratio. To ensure a safe operation, avoid unexpected damages and enhance the reliability of the converter, fully-integrated protection circuits such as over voltage protection (OVP), under voltage lock out (UVLO), startup, and thermal shutdown (TSD) blocks are designed. In this paper, these three fully-integrated protection circuit blocks are proposed for use in the DC-DC buck converter. The buck converter with proposed protection blocks is operated with a switching frequency of 1 MHz in continuous conduction mode (CCM). In order to verify the proposed scheme, the buck converter has been designed using a 180 nm CMOS technology. The UVLO circuit is designed to track the input voltage and turns on/off the buck converter when the input voltage is higher/lower than 2.6 V, respectively. The OVP circuit blocks the buck converter's operation when the input voltage is over 3.3 V, thereby preventing the destruction of the devices inside the controller IC. The TSD circuit shuts down the converter's operation when the temperature is over $85^{\circ}C$. In order to verify the proposed scheme, these protection circuits were firstly verified through the simulation in SPICE. The proposed protection circuits were then fabricated and the measured results showed a good matching with the simulation results.

• The Research Journal of the Costume Culture
• /
• v.29 no.2
• /
• pp.185-203
• /
• 2021

The aim of this study was to reveal the modern succession and reinterpretation of brand identity through the case of Balenciaga design presented by Demna Gvasalia through a review of the literature, design collection, and design review analysis. The design collection analysis was conducted from 2016 F/W to 2020 F/W, when Demna Gvasalia commenced responsibility for the Balenciaga collection. A total of 12 articles from overseas fashion magazines and newspapers were analyzed. A modern reinterpretation of Demna Gvasalia's Balenciaga design is as follows. First, he introduced luxury mode to reflect a sense of the times and introduced luxury street looks based on street and sports sensibilities, showing various styles without specific concepts. Second, by sharing universal sensibilities based on pragmatism, he proposed an easy-to-wear outfit for daily life to demonstrate the everydayness of fashion. Third, as a new exploration of traditional structural beauty, the design of Cristobal Balenciaga was reinterpreted through the conversion of items, overlapping outfits, and the introduction of high-tech technologies. Fourth, by taking a conceptual approach to fashion, he has renewed the spirit of experimentation and modernity shown by Cristobal Balenciaga. Fifth, with the presentation of a new icon, new styles of sneakers such as Triple S and Speed Runner are presented as new icons. He inherited the original mindset and creative approach of the house's founder, Cristobal Balenciaga, and reinterpreted it from a contemporary street sensibility and pragmatic perspective.

• Animal Bioscience
• /
• v.35 no.11
• /
• pp.1689-1697
• /
• 2022

Objective: The aim of this study was to compare the effects of three kinds of organic acid (OA) products on the growth performance, intestinal characteristics and morphology, and cecal microflora in broilers fed a corn-soybean meal meal diet. Methods: A total of 420 one-day-old male Cobb 500 broilers with an average initial body weight of 49.11±1.02 g were used in this 42-day experiment. Birds were randomly allotted to one of five treatments (7 replicates with 12 birds per replicate). Treatments consisted of negative control (NC), basal diet; positive control (PC), basal diet+100 mg/kg of Aviramycin; OA1, basal diet+500 mg/kg of OA product 1; OA2, basal diet+1,000 mg/kg of OA product 2; and OA3, basal diet+1,200 mg/kg of OA product 3. Results: The results indicated that OA product addition had no effect on growth performance parameters, such as body weight gain, feed intake, and feed conversion ratio, from days 1 to 14, 15 to 28, and 0 to 42, or on the pH values of the intestine, intestinal weight, or intestinal weight to body weight ratio. The intestinal morphology in terms of villus height and crypt depth were affected by dietary supplementation of OA products, respectively. Furthermore, dietary addition of OAs had positive influences on the maintenance of the cecal microflora based on the results of 16S rRNA analysis. Conclusion: Dietary inclusion of three kinds of OA products all benefit broilers, but the mode of action may be different. This study provides a basis for the application of OA products used in the poultry industry.

• Tribology and Lubricants
• /
• v.38 no.2
• /
• pp.33-40
• /
• 2022

In this study, we present rotor dynamic analysis and operation test of a turbo expander for a hydrogen liquefaction plant. The turbo expander consists of a turbine and compressor wheel connected to a shaft supported by two hydrostatic radial and thrust bearings. In rotor dynamic analysis, the shaft is modeled as a rigid body, and the equations of motion for the shaft are solved using the unsteady Reynolds equation. Additionally, the operating test of the turbo expander has been performed in the test rig. Pressurized helium is supplied to the bearings at 8.5 bar. Furthermore, we monitor the shaft vibration and flow rate of the helium supplied to the bearings. The rotor dynamic analysis result shows that there are two critical speeds related with the rigid body mode under 40,000 rpm. At the first critical speed of 36,000 rpm, the vibration at the compressor side is maximum, whereas that of the turbine is maximum at the second critical speed of 40,000 rpm. The predicted maximum shaft vibration is 3 ㎛, whereas sub-synchronous vibration is not presented. The operation test results show that there are two critical speeds under the rated speed, and the measured vibration value agrees well with predicted value. The measured flow rate of the helium supplied to the bearing is 2.0 g/s, which also agrees well with the predicted data.